SX1EA-72S-0.635SH

SX1EA-72S-0.635SH Datasheet

SX1 Series

Part	Datasheet
SX1EA-72S-0.635SH	SX1EA-72S-0.635SH (pdf)

Related Parts	Information
SX1B-72S-0.635SH	SX1B-72S-0.635SH
SX1BA-72S-0.635SH	SX1BA-72S-0.635SH
SX1CA-72S-0.635SH	SX1CA-72S-0.635SH

PDF Datasheet Preview
0.635mm Pitch S.O. DIMM Socket SX1 Series Variation in Mounting Height q Low Profile Type Mounting Height 4.0mm q Standard Type Mounting Height 5.5mm sFeatures 72pos. Small Outline DIMM Socket SX1 series is a 0.635mm pitch horizontal SMT type socket applicable to Small Outline DIMM standardized in JEDEC. The size is about half as large as the conventional 72 contacts DRAM SIMM socket. Corresponding to double density both surfaces , this socket realizes high functionality and density of the module board. Variation in Mounting Height Three grades of variation are available for the mounting height. Easy Insertion and Extraction of Module Board One-touch operation to insert the module board slantly and push it downward. Widen latches right and left, and the module board will be automatically raised. This mechanism allows easy automatic insertion and extraction. Achieve High Performance This socket achieves high performance by the wiping effect in the insertion and the unique press-fit face contact. Insertion and Extraction Operation with Click Sensibility The unique mold twin-latch allows excellent insertion and extraction operation with a sensible click. q High Profile Type Mounting Height 8.0mm Easy Insertion and Extraction Operation of Module Board sApplications Personal computers, business equipment, Measuring instrument, telecommunication equipment, FA, game, etc. sProduct Specifications Rating Rated Current Rated Voltage Operating Temperature Range -55ç+85ç 25V AC 0.5A Operating Humidity Range -55ç~+85ç Item Contact Resistance Insulation Resistance Withstand voltage Vibration Moisture Resistance Temperature Cycle Operating Life Salt spray Specification min. min. Neither short nor breakdown should occur Electrical discontinuity, 1µS max. Contact resistance max. Insulation Resistance min Contact resistance max. Insulation Resistance min: Contact resistance max. Contact resistance max. Condition Measured at 100mA Measured at 250V DC 250V AC for 1 minute Exposed to 10~55Hz 5 minutes/cycle and single amplitude 0.75mm in 3 directions for 50 minutes, respectively. Exposed to temperature 40±2ç and humidity 90~95% for 96 hours 5 cycles under following condition; Temperature -55➝ +5~35➝ +85➝ +5~35ç Time -30➝ 10~15➝ +30➝ 10~15 30 cycles No remarkable corrosion Exposed to salt 5% density water for 48 hours sMaterial sOrdering Information SX1 C A - 72 S - SH q Series Name w Mounting Height B Standard type Height 5.5mm C High profile type Height 8.0mm E Low profile type Height 4.0mm e DIMM Key None 3.3V type A 5V type r Number of Contacts 72 t Contact Type Female contact y Contact Pitch 0.635mm u Contact type SH SMT type sStandard Type Product No. HRS No. Number of Contacts Remarks SX1B-72S-0.635SH CL530-0018-9 SX1BA-72S-0.635SH CL530-0019-1 3.3V Type Selective gold plating 72 5V Type Selective gold plating Note 1 The tube packaging product is provided for products marked with In order to designate the tube package product, add 20 to the tail of the product No. Delivery unit 20 pcs per set Note 2 The 3.3V and 5V keys correspond to the Small Outline DIMM key. sHigh Profile Type Product No. HRS No. Number of Contacts SX1C-72S-0.635SH SX1CA-72S-0.635SH CL530-0003-1 CL530-0004-4 3.3V Type 72 5V Type Note 2 The 3.3V and 5V keys correspond to the Small Outline DIMM key. Remarks Selective gold plating Selective gold plating sLow Profile Type Product No.

PDF Datasheet Preview

0.635mm Pitch S.O. DIMM Socket

SX1 Series

Variation in Mounting Height
q Low Profile Type Mounting Height 4.0mm
q Standard Type Mounting Height 5.5mm
sFeatures
72pos. Small Outline DIMM Socket

SX1 series is a 0.635mm pitch horizontal SMT type socket applicable to Small Outline DIMM standardized in JEDEC. The size is about half as large as the conventional 72 contacts DRAM SIMM socket. Corresponding to double density both surfaces , this socket realizes high functionality and density of the module board.

Variation in Mounting Height

Three grades of variation are available for the mounting height.

Easy Insertion and Extraction of Module Board

One-touch operation to insert the module board slantly and push it downward. Widen latches right and left, and the module board will be automatically raised. This mechanism allows easy automatic insertion and extraction.

Achieve High Performance

This socket achieves high performance by the wiping effect in the insertion and the unique press-fit face contact.

Insertion and Extraction Operation with Click Sensibility

The unique mold twin-latch allows excellent insertion and extraction operation with a sensible click.
q High Profile Type Mounting Height 8.0mm

Easy Insertion and Extraction Operation of Module Board
sApplications

Personal computers, business equipment, Measuring instrument, telecommunication equipment, FA, game, etc.
sProduct Specifications

Rating

Rated Current Rated Voltage Operating Temperature Range
-55ç+85ç 25V AC 0.5A

Operating Humidity Range -55ç~+85ç

Item Contact Resistance Insulation Resistance Withstand voltage

Vibration

Moisture Resistance

Temperature Cycle

Operating Life Salt spray

Specification min. min. Neither short nor breakdown should occur

Electrical discontinuity, 1µS max. Contact resistance max. Insulation Resistance min

Contact resistance max. Insulation Resistance min:

Contact resistance max. Contact resistance max.

Condition Measured at 100mA Measured at 250V DC 250V AC for 1 minute Exposed to 10~55Hz 5 minutes/cycle and single amplitude 0.75mm in 3 directions for 50 minutes, respectively. Exposed to temperature 40±2ç and humidity 90~95% for 96 hours
5 cycles under following condition;

Temperature -55➝ +5~35➝ +85➝ +5~35ç

Time
-30➝ 10~15➝ +30➝ 10~15
30 cycles No remarkable corrosion Exposed to salt 5% density water for 48 hours
sMaterial
sOrdering Information

SX1 C A - 72 S - SH
q Series Name
w Mounting Height

B Standard type Height 5.5mm

C High profile type Height 8.0mm

E Low profile type Height 4.0mm
e DIMM Key

None 3.3V type

A 5V type
r Number of Contacts 72
t Contact Type Female contact
y Contact Pitch 0.635mm u Contact type

SH SMT type
sStandard Type

Product No.

HRS No.

Number of Contacts

Remarks

SX1B-72S-0.635SH

CL530-0018-9

SX1BA-72S-0.635SH

CL530-0019-1
3.3V Type Selective gold plating 72
5V Type Selective gold plating

Note 1 The tube packaging product is provided for products marked with In order to designate the tube package product, add 20 to the tail of the product No. Delivery unit 20 pcs per set

Note 2 The 3.3V and 5V keys correspond to the Small Outline DIMM key.
sHigh Profile Type

Product No.

HRS No.

Number of Contacts

SX1C-72S-0.635SH SX1CA-72S-0.635SH

CL530-0003-1 CL530-0004-4
3.3V Type 72
5V Type

Note 2 The 3.3V and 5V keys correspond to the Small Outline DIMM key.

Remarks

Selective gold plating

Selective gold plating
sLow Profile Type

Product No.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SX1EA-72S-0.635SH Datasheet file may be downloaded here without warranties.

Datasheet ID: SX1EA-72S-0.635SH 636238