MS-166-HRMJ-H1

MS-166-HRMJ-H1 Datasheet

MS-166 Series

Part	Datasheet
MS-166-HRMJ-H1	MS-166-HRMJ-H1 (pdf)

Related Parts	Information
MS-166-HRMJ-F1	MS-166-HRMJ-F1
MS-166	MS-166
MS-166(01)	MS-166(01)
MS-166-HRMJ-1	MS-166-HRMJ-1

PDF Datasheet Preview
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. NEW All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. Subminiature Coaxial Switch mm High, DC to 11 GHz MS-166 Series Space-saving design Low profile mm protrusion above the board. Lightweight g. total weight. •Overview Developed for inspection of high frequency circuits used in portable terminals.Verification of the circuit performance is accomplished by simply inserting the external plug in the board mounted receptacle.This action re-directs the circuit from normal condition to the plug side. Removing the plug restores circuit to its normal condition. •Features Low insertion loss dB typical at GHz not mated with the plug . dB typical at 6 GHz not mated with the plug . dB typical at 11 GHz not mated with the plug . Space-saving design mm x mm occupied board space. Low profile mm protrusion above the board. Lightweight g. total weight without vacuum cap . Miniaturization of Equipment Holes The outside diameter of the tip of the plug connectors is a narrow mm which permits a great reduction in the size of the equipment holes. Durability 50 mating/unmating cycles, with corresponding plug. Performs over a wide frequency range Applicable frequencies range over a wide band, from DC to 11 GHz. Board placement with automatic equipment Packaged on tape-and-reel. Also available with a vacuum pick-up cap over each switch. All components and materials comply with the requirements of the EU Directive 2002/95/EC. •Applications Portable terminals, ETC, notebook computers Bluetooth , wireless LAN, POS terminals, GPS terminals, PDA, and any small devices requiring verification of antenna/circuit performance. Comparison with the existing MS-156HF MS-156HF •Footprint MS-166 •Height 22% saving of space 25% lower profile •Weight 0.025g 0.016g 36% lighter weight ●SMA conversion adapters The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHMS pSro-d1u6ct6s hPle1as.2e cmhemck thHeigprhod,uDctCs sttaotu1s 1onGthHe Hzirose website RoHS search at or contact your Hirose sales representative. •Product Specifications

PDF Datasheet Preview

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

NEW All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative.

Subminiature Coaxial Switch mm High, DC to 11 GHz

MS-166 Series

Space-saving design Low profile mm protrusion above the board. Lightweight g. total weight.
•Overview

Developed for inspection of high frequency circuits used in portable terminals.Verification of the circuit performance is accomplished by simply inserting the external plug in the board mounted receptacle.This action re-directs the circuit from normal condition to the plug side. Removing the plug restores circuit to its normal condition.
•Features

Low insertion loss
dB typical at GHz not mated with the plug . dB typical at 6 GHz not mated with the plug . dB typical at 11 GHz not mated with the plug .

Space-saving design
mm x mm occupied board space.

Low profile
mm protrusion above the board.

Lightweight
g. total weight without vacuum cap .

Miniaturization of Equipment Holes

The outside diameter of the tip of the plug connectors is a narrow mm which permits a great reduction in the size of the equipment holes.

Durability
50 mating/unmating cycles, with corresponding plug.

Performs over a wide frequency range

Applicable frequencies range over a wide band, from DC to 11 GHz.

Board placement with automatic equipment

Packaged on tape-and-reel. Also available with a vacuum pick-up cap over each switch.

All components and materials comply with the requirements of the EU Directive 2002/95/EC.
•Applications

Portable terminals, ETC, notebook computers Bluetooth , wireless LAN, POS terminals, GPS terminals, PDA, and any small devices requiring verification of antenna/circuit performance.

Comparison with the existing MS-156HF

MS-156HF
•Footprint

MS-166
•Height
22% saving of space
25% lower profile
•Weight
0.025g
0.016g
36% lighter weight
●SMA conversion adapters

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHMS pSro-d1u6ct6s hPle1as.2e cmhemck thHeigprhod,uDctCs sttaotu1s 1onGthHe Hzirose website RoHS search at or contact your Hirose sales representative.
•Product Specifications

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MS-166-HRMJ-H1 Datasheet file may be downloaded here without warranties.

Datasheet ID: MS-166-HRMJ-H1 636211