MRF01P-HRMJ

MRF01P-HRMJ Datasheet

MRF01 Series

Part	Datasheet
MRF01P-HRMJ	MRF01P-HRMJ (pdf)

Related Parts	Information
MRF01J-HRMJ	MRF01J-HRMJ
MRF01-PR-1	MRF01-PR-1
MRF01-R-1	MRF01-R-1

PDF Datasheet Preview
Push-On Coaxial Connectors PC Card Type 2 Mountable MRF01 Series Modem Card Mounting Example A special frame kit has not been manufactured. sFeatures Uses a push-on type system which is easy to engage and disengage. There is no lock. Mountable on PCMCIA Type II Card The 3 mm receptacle thickness permits mounting to the back side of a type II card. Note that at the time of card mounting, use of 0.15mm offset of the board mounting surface from the card center line will result in the same card center axis and connector center axis. Board Mounting Example High Degree of Matching These connectors offer high frequency performance from 0 to 3 GHz with a V.S.W.R. of or less. Accommodates Ultra-Fine Cable Suitable cable ...RG-178B/U ...RG-196A/U Ø 2 sApplications Wireless LAN cards, GPS cards, and miniature wireless communications devices. sFunction Diagrams Jack Side sJack MRF01-J-178 Plug Side sPlug Receptacle MRF01-PR-1 sReceptacle MRF 01-R-1 sConversion Adapter Coupling portion MRF01 side jack - SMA side jack MRF01J-HRMJ sConversion Adapter Coupling portion MRF01 side plug - SMA side jack MRF01P-HRMJ s Product Specifications Ratings Nominal characteristic impedance Voltage Rated Frequency 50 ohms 150 V AC DC to 3 GHz Operating temperature Operating humidity -20°C to +60°C 95% or less Item Requirements Contact resistance Inner 10 max. Outer 3 max. Insulation resistance 5000 min. Withstanding voltage No flashover or insulation breakdown. V.S.W.R. * N max. sOrdering Information Note1 The cable connector is measured with double ended 10cm cable assembly. Note2 The printed circuit board connector is mounted on the 50 ohms PCB, to which Hirose's adaptor is connected. Material Beryllium copper/Brass PTFE Beryllium copper Phosphor bronze Copper Finish Gold plating Gold plating Gold plating Nickel plating MRF01 [ ] [ ] q Series name MRF01 w Connector types J Jack R Receptacle PR Plug receptacle e Applicable cable or suffix 178 RG-178B/U Ø RG-196B/U Ø 2 sJack sReceptacle CL No. 313-1102-7 Part Number MRF01-J-178 sPlug Receptacle CL No. 313-1101-4 Part Number MRF01-R-1 sConversion Adapter qSMA conversion adapter Coupling portion MRF01 side plug - SMA side jack CL No. 313-1100-1 Part Number MRF01-PR-1 qSMA conversion adapter Coupling portion MRF01 side jack - SMA side jack CL No. 311-0289-1 Part Number MRF01P-HRMJ CL No. 311-0290-0 Part Number MRF01J-HRMJ sConnector Mounting Condition The mounting reference diagram is an anticipated diagram of the condition of mounting to a frame offset mm from the card center line. sPCB mounting pattern 5.5min 0.7min 3.2min 1.8min

PDF Datasheet Preview

Push-On Coaxial Connectors PC Card Type 2 Mountable

MRF01 Series

Modem Card Mounting Example A special frame kit has not been manufactured.
sFeatures

Uses a push-on type system which is easy to engage and disengage. There is no lock.

Mountable on PCMCIA Type II Card

The 3 mm receptacle thickness permits mounting to the back side of a type II card. Note that at the time of card mounting, use of 0.15mm offset of the board mounting surface from the card center line will result in the same card center axis and connector center axis.

Board Mounting Example

High Degree of Matching

These connectors offer high frequency performance from 0 to 3 GHz with a V.S.W.R. of or less.

Accommodates Ultra-Fine Cable

Suitable cable ...RG-178B/U ...RG-196A/U Ø 2
sApplications

Wireless LAN cards, GPS cards, and miniature wireless communications devices.
sFunction Diagrams

Jack Side
sJack MRF01-J-178

Plug Side
sPlug Receptacle MRF01-PR-1
sReceptacle MRF 01-R-1
sConversion Adapter

Coupling portion MRF01 side jack - SMA side jack MRF01J-HRMJ
sConversion Adapter

Coupling portion MRF01 side plug - SMA side jack MRF01P-HRMJ
s Product Specifications

Ratings

Nominal characteristic impedance Voltage

Rated Frequency
50 ohms 150 V AC DC to 3 GHz

Operating temperature Operating humidity
-20°C to +60°C 95% or less

Item

Requirements

Contact resistance

Inner 10 max. Outer 3 max.

Insulation resistance
5000 min.

Withstanding voltage

No flashover or insulation breakdown.

V.S.W.R. *

N max.
sOrdering Information

Note1 The cable connector is measured with double ended 10cm cable assembly.

Note2 The printed circuit board connector is mounted on the 50 ohms PCB, to which Hirose's adaptor is connected.

Material Beryllium copper/Brass

PTFE Beryllium copper Phosphor bronze

Copper

Finish Gold plating Gold plating Gold plating Nickel plating

MRF01 [ ] [ ]
q Series name MRF01
w Connector types

J Jack R Receptacle PR Plug receptacle
e Applicable cable or suffix
178 RG-178B/U Ø RG-196B/U Ø 2
sJack sReceptacle

CL No. 313-1102-7

Part Number MRF01-J-178
sPlug Receptacle

CL No. 313-1101-4

Part Number MRF01-R-1
sConversion Adapter
qSMA conversion adapter Coupling portion MRF01 side plug - SMA side jack

CL No. 313-1100-1

Part Number MRF01-PR-1
qSMA conversion adapter Coupling portion MRF01 side jack - SMA side jack

CL No. 311-0289-1

Part Number MRF01P-HRMJ

CL No. 311-0290-0

Part Number MRF01J-HRMJ
sConnector Mounting Condition

The mounting reference diagram is an anticipated diagram of the condition of mounting to a frame offset mm from the card center line.
sPCB mounting pattern
5.5min
0.7min
3.2min
1.8min

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MRF01P-HRMJ Datasheet file may be downloaded here without warranties.

Datasheet ID: MRF01P-HRMJ 636197