HT104/DF7-2022

HT104/DF7-2022 Datasheet

10 HT104/HR24-1

Part	Datasheet
HT104/DF7-2022	HT104/DF7-2022 (pdf)

Related Parts	Information
RP34-1/CR-HT	RP34-1/CR-HT
HR25-TA3032HC	HR25-TA3032HC
HT102/DF1BE-30P	HT102/DF1BE-30P
HR22-TA2428HC	HR22-TA2428HC
HT102-DF1BE-2022P	HT102-DF1BE-2022P
HT104/DF22-1416	HT104/DF22-1416
HT102/RP34L-SC1-212	HT102/RP34L-SC1-212
HT104/DF22A-1416	HT104/DF22A-1416
DF11EP-TA2428HC	DF11EP-TA2428HC
DF3-TA22HC	DF3-TA22HC
DF11-TA30HC	DF11-TA30HC
HT104/DF7-1618	HT104/DF7-1618

PDF Datasheet Preview
Manual crimping tool INSTRUCTION MANUAL CAUTION : HIROSE ELECTRIC CO., LTD. FOR SAFE OPERATION The operators of the tool and the maintenance personnel who are in charge of maintenance and repair work are required to read the following SAFETY INSTRUCTIONS Fully understand and follow the descriptions given in this Instruction Manual and the warning symbols attached to the tool. I Description of warning symbols DANGER Misuse of the tool will expose the operator to immediate danger of major injury or death. WARNING Misuse of the tool may expose the operator to danger of major injury or death. Misuse of the tool may expose the operator to danger of injury and may cause damage to CAUTION property. Major injury Loss of eyesight, wounds, burns hyperthermal and hypothermal burns , electric shocks, fracture of a bone, poisoning, etc. requiring emergency treatment or extended medical care. Injury Minor injury Wounds, burns, electric shocks, etc. requiring medical treatment. Damage to property Damage to the machinery and or the surrounding area. SAFETY INSTRUCTIONS CAUTION Basic safety instructions Be sure to read understand and follow all the instructions and other materials supplied with the unit as before using the tool. Safe operation Be sure to use the tool as instructed so that your fingers or are not part of clothing caught in the tool during crimping operation. Application This tool shall only be used for its originally intended purpose while following the instructions specified in this Instruction Manual. Hirose assumes no responsibility for any misuse of the tool other than the intended use. Modifications to this tool is prohibited. We assume no responsibility for accidents resulting from modifications. Maintenance To prevent possible accidents caused by unfamiliarity with the operation of the tool, repair and adjustment of the tool shall be conducted only by maintenance personnel who have a full knowledge of the tool. Any repair and adjustment beyond the range covered by the instructions given in this Instruction Manual is prohibited. We assume no responsibility for accidents caused by improper repair or adjustment or the use of non-genuine part s . To protect against personal injury, check to be sure that screws and nuts are properly tightened after the completion of repair/adjustment works or replacement of the parts. Periodically cleaning of the tool is recommended. In the event that your tool fails to perform normally after repair or adjusting immediately stop the work and contact us for service so as to protect against personal injury. TABLE OF CONTENTS Forward 1 Precautions in handling the tool and maintenance 1 Basic outline of crimping operation 2 Configuration and function of crimping contact 2 Configuration of crimping contact 2 Function of each part of crimping 2 Stripping of wire covering 3 Correct stripping length 3 Wire stripped condition 3 Bell mouth 3 Crimp height 3 Measuring the crimp height 3 Tensile strength of crimped section and measuring method 4 Tensile strength of crimped section 4 Testing method of tensile strength 4 Confirmation of the shape of contact after crimping 4 Standard of good products 4 Configuration of tools 5 Table of tools 6 Operating procedure 8 Replacing the crimper 8 Operating procedure 8 Crimping conditions and crimping quality standard 9

PDF Datasheet Preview

Manual crimping tool

INSTRUCTION MANUAL

CAUTION :

HIROSE ELECTRIC CO., LTD.

FOR SAFE OPERATION

The operators of the tool and the maintenance personnel who are in charge of maintenance and repair work are required to read the following SAFETY INSTRUCTIONS Fully understand and follow the descriptions given in this Instruction Manual and the warning symbols attached to the tool.

I Description of warning symbols

DANGER

Misuse of the tool will expose the operator to immediate danger of major injury or death.

WARNING Misuse of the tool may expose the operator to danger of major injury or death.

Misuse of the tool may expose the operator to danger of injury and may cause damage to

CAUTION property.

Major injury

Loss of eyesight, wounds, burns hyperthermal and hypothermal burns , electric shocks, fracture of a bone,
poisoning, etc. requiring emergency treatment or extended medical care.

Injury Minor injury Wounds, burns, electric shocks, etc. requiring medical treatment.

Damage to property Damage to the machinery and or the surrounding area.

SAFETY INSTRUCTIONS

CAUTION

Basic safety instructions Be sure to read understand and follow all the instructions and other materials supplied with the unit as before using the tool.

Safe operation Be sure to use the tool as instructed so that your fingers or are not part of clothing caught in the tool during crimping
operation.

Application This tool shall only be used for its originally intended purpose while following the instructions specified in this Instruction

Manual. Hirose assumes no responsibility for any misuse of the tool other than the intended use. Modifications to this tool is prohibited. We assume no responsibility for accidents resulting from modifications.

Maintenance To prevent possible accidents caused by unfamiliarity with the operation of the tool, repair and adjustment of the tool shall be
conducted only by maintenance personnel who have a full knowledge of the tool. Any repair and adjustment beyond the range covered by the instructions given in this Instruction Manual is prohibited. We assume no responsibility for accidents caused by improper repair or adjustment or the use of non-genuine part s . To protect against personal injury, check to be sure that screws and nuts are properly tightened after the completion of repair/adjustment works or replacement of the parts. Periodically cleaning of the tool is recommended. In the event that your tool fails to perform normally after repair or adjusting immediately stop the work and contact us for service so as to protect against personal injury.

TABLE OF CONTENTS

Forward 1 Precautions in handling the tool and maintenance 1 Basic outline of crimping operation 2

Configuration and function of crimping contact 2

Configuration of crimping contact 2 Function of each part of crimping 2

Stripping of wire covering 3

Correct stripping length 3 Wire stripped condition 3

Bell mouth 3 Crimp height 3

Measuring the crimp height 3

Tensile strength of crimped section and measuring method 4

Tensile strength of crimped section 4 Testing method of tensile strength 4

Confirmation of the shape of contact after crimping 4

Standard of good products 4

Configuration of tools 5 Table of tools 6 Operating procedure 8

Replacing the crimper 8 Operating procedure 8

Crimping conditions and crimping quality standard 9

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HT104/DF7-2022 Datasheet file may be downloaded here without warranties.

Datasheet ID: HT104/DF7-2022 636193