IC7-68PD-1.27DS-EJL(92)
IC7-68PD-1.27DS-EJL(92) Datasheet
IC7 Series
| Part | Datasheet |
|---|---|
IC7-68PD-1.27DS-EJL(92) |
IC7-68PD-1.27DS-EJL(92) (pdf) |
| Related Parts | Information |
|---|---|
IC7-68PD-1.27DS-EJR |
IC7-68PD-1.27DS-EJR |
IC7-68PD-1.27DS-EJL |
IC7-68PD-1.27DS-EJL |
IC7-68PDR-1.27DS-EJR |
IC7-68PDR-1.27DS-EJR |
IC7-68PDR-1.27DS-EJL |
IC7-68PDR-1.27DS-EJL |
IC7-68PDR-1.27DS-EJL(72) |
IC7-68PDR-1.27DS-EJL(72) |
IC7-68PD-1.27DS-EJL(72) |
IC7-68PD-1.27DS-EJL(72) |
IC7-68PD-1.27DS(72) |
IC7-68PD-1.27DS(72) |
IC7-68PD-1.27DS-EJR(72) |
IC7-68PD-1.27DS-EJR(72) |
IC7-68PDR-1.27DS-EJR(72) |
IC7-68PDR-1.27DS-EJR(72) |
| PDF Datasheet Preview |
|---|
| Single Slot Connector for PC Card Type III IC7 Series sFeatures PC Card Standard compliant: Type I, type II and type III cards are covered. Terminals for grounding are provided. Space saving and Lightweight Connector height is minimized to 5.4mm, and weight is 12.5g. Eject mechanism Hirose's unique ejection mechanism provides an higher degree of card ejection over existing products. sProduct Specifications Rating Current rating A Voltage rating 125V AC Operating temperature range -55ç to +85ç Note 1 Storage temperature range -40ç to +70ç Note 2 Operating humidity range Relative humidity 95% max. Storage humidity range Relative humidity 40% to 70% No condensation Item 1.Insulation resistance 2.Withstanding voltage 3.Contact resistance Specification 1000 M ohms min. No flashover or insulation breakdown 40 m ohms max. Initial value 500 V DC 500 V AC / 1 minute 1mA Conditions 4.Vibration No electrical discontinuity of 100ns or more Frequency 10 to 2000 Hz, full amplitude of mm or acceleration of 147m/s2, 4 hours in each of the 3 directions 5.Humidity Steady state Insulation resistance 100 M ohms min. 6.Temperature cycle No damage, cracks, or parts looseness 96 hours at temperature of 40ç and humidity of 90% to 95% Temperature -55ç +15ç to +35ç +85ç +15ç to +35ç Time 30 5 max. 30 5 max. Minutes 5 cycles 7.Durability insertion/ withdrawal Contact resistance 20 m ohms max. from initial value 8.Resistance to soldering heat No deformation of the insulator parts affecting performance 10000 cycles at 400 to 600 cycles per hous Manual soldering 300ç for 3 seconds Note 1 Includes temperature rise caused by current flow. Note 2 The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. sMaterial Insulator Part Connector Eject Button Contact Connector Terminals for grounding Eject metal fitting Locking pins Nuts Material PBT PA Brass sOrdering Information IC7 - 68 PDR - DS - EJR 1 Series Name IC7 2 Number of contacts 68 3 Board mounting type BExamples of Connector Mounting Standard type qIC7-68PD-1.27DS-EJL qIC7-68PD-1.27DS-EJR Card tope surface Card tope surface Eject Button Card tope surface Card tope surface Eject Button qIC7-68PDR-1.27DS-EJL Card tope surface qIC7-68PDR-1.27DS-EJR Card tope surface Card tope surface Eject Button Card tope surface Eject Button sSingle Slot Connector Table 1 Contact No. Contact Length 1, 17, 34, 35, 51, 68 36, 67 Other than above Note 1 2 3 4 The contacts length is indicated in Table applicable range indicated dimensions taken 10mm from bottom. The terminal for grounding should be securely fasted from the bottom surface of the board using a screw M2∞0.4 , flat washer and lock washer. BPCB mounting pattern BExample of Screw Fastening Recommendation sSingle Slot Connector Table 1 Contact No. Contact Length |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IC7-68PD-1.27DS-EJL(92) Datasheet file may be downloaded here without warranties.