IC11SA-PL-SF-EJR(90)

IC11SA-PL-SF-EJR(90) Datasheet

IC11S Series

Part	Datasheet
IC11SA-PL-SF-EJR(90)	IC11SA-PL-SF-EJR(90) (pdf)

Related Parts	Information
IC11SA-BUR-EJL	IC11SA-BUR-EJL
IC11SA-BUR-EJR	IC11SA-BUR-EJR
IC11S-BUR-EJR	IC11S-BUR-EJR
IC11S-BD-EJL	IC11S-BD-EJL
IC11S-BUR-EJL	IC11S-BUR-EJL
IC11S-BUR-PNEJL(71)	IC11S-BUR-PNEJL(71)
IC11SA-BUR-PNEJR(71)	IC11SA-BUR-PNEJR(71)
IC11SA-BD-PNEJR(71)	IC11SA-BD-PNEJR(71)
IC11SA-BD-EJL	IC11SA-BD-EJL
IC11SA-PLR-SF-EJL(71)	IC11SA-PLR-SF-EJL(71)
IC11S-BD-FEJR	IC11S-BD-FEJR
IC11SA-BD-FEJR	IC11SA-BD-FEJR
IC11S-BUR-PNEJR(71)	IC11S-BUR-PNEJR(71)
IC11S-BD-PEJL	IC11S-BD-PEJL
IC11S-BD-FEJL	IC11S-BD-FEJL
IC11S-68PL-1.27SF-EJL	IC11S-68PL-1.27SF-EJL
IC11SA-BD-PNEJR	IC11SA-BD-PNEJR
IC11S-BUR-PEJL(71)	IC11S-BUR-PEJL(71)
IC11SA-BD-PNEJL(71)	IC11SA-BD-PNEJL(71)
IC11S-BD-PNEJL(71)	IC11S-BD-PNEJL(71)
IC11S-BD-PNEJR(71)	IC11S-BD-PNEJR(71)
IC11SA-BUR-FEJR	IC11SA-BUR-FEJR
IC11S-BUR-PEJL	IC11S-BUR-PEJL
IC11S-BUR-FEJL	IC11S-BUR-FEJL
IC11SA-BD-PEJR	IC11SA-BD-PEJR
IC11S-68PL-1.27SF-EJR	IC11S-68PL-1.27SF-EJR
IC11SA-BUR-PEJL	IC11SA-BUR-PEJL
IC11SA-BUR-PNEJL	IC11SA-BUR-PNEJL
IC11SA-68PLR-1.27SF-EJL	IC11SA-68PLR-1.27SF-EJL
IC11S-68PLR-1.27SF-EJL	IC11S-68PLR-1.27SF-EJL
IC11SA-68PL-1.27SF-EJL	IC11SA-68PL-1.27SF-EJL
IC11SA-BUR-PEJR	IC11SA-BUR-PEJR
IC11S-BD-PNEJL	IC11S-BD-PNEJL
IC11SA-68PLR-1.27SF-EJR	IC11SA-68PLR-1.27SF-EJR
IC11S-BUR-PNEJR	IC11S-BUR-PNEJR
IC11S-BUR-PEJR	IC11S-BUR-PEJR
IC11S-68PLR-1.27SF-EJR	IC11S-68PLR-1.27SF-EJR
IC11SA-BD-PNEJL	IC11SA-BD-PNEJL
IC11SA-BD-PEJL	IC11SA-BD-PEJL
IC11S-BUR-PNEJL	IC11S-BUR-PNEJL
IC11SA-BUR-PNEJL(71)	IC11SA-BUR-PNEJL(71)
IC11SA-BUR-PNEJR	IC11SA-BUR-PNEJR
IC11S-BD-PNEJR	IC11S-BD-PNEJR
IC11S-BD-PEJR	IC11S-BD-PEJR
IC11SA-68PL-1.27SF-EJR	IC11SA-68PL-1.27SF-EJR
IC11SA-BD-L	IC11SA-BD-L
IC11S-BD-EJR	IC11S-BD-EJR
IC11SA-BD-EJR	IC11SA-BD-EJR
IC11S-PLR-SF-EJL(71)	IC11S-PLR-SF-EJL(71)
IC11S-PLR-SF-EJR(71)	IC11S-PLR-SF-EJR(71)
IC11S-PL-SF-EJR(71)	IC11S-PL-SF-EJR(71)
IC11SA-PL-SF-EJR(71)	IC11SA-PL-SF-EJR(71)
IC11S-PL-SF-EJL(75)	IC11S-PL-SF-EJL(75)
IC11S-BUR-EJL(31)	IC11S-BUR-EJL(31)
IC11S-BD-PEJL(71)	IC11S-BD-PEJL(71)
IC11SA-PLR-SF-EJR(71)	IC11SA-PLR-SF-EJR(71)
IC11SA-BUR-PEJR(71)	IC11SA-BUR-PEJR(71)
IC11SA-BD-FEJL	IC11SA-BD-FEJL
IC11S-PL-SF(71)	IC11S-PL-SF(71)
IC11SA-BD-PEJL(71)	IC11SA-BD-PEJL(71)
IC11S-BUR-FEJR	IC11S-BUR-FEJR
IC11SA-BD-PEJR(71)	IC11SA-BD-PEJR(71)
IC11SA-BUR-FEJL	IC11SA-BUR-FEJL
IC11SA-PLR-SFM-EJL(71)	IC11SA-PLR-SFM-EJL(71)
IC11S-BD-PEJR(71)	IC11S-BD-PEJR(71)
IC11SA-PL-SF-EJL(71)	IC11SA-PL-SF-EJL(71)
IC11S-PL-SF-EJL(71)	IC11S-PL-SF-EJL(71)
IC11SA-BUR-PEJL(71)	IC11SA-BUR-PEJL(71)
IC11S-BUR-PEJR(71)	IC11S-BUR-PEJR(71)

PDF Datasheet Preview
Single Slot SMT Connectors For Card-Bus Based PC Cards IC11S Series PC Card Standard Compliant Reduced height 5.6mm high sFeatures PC Card Standard compliant: • Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a grounding plate and 8 grounding contacts. • Type 1, type 2 and type 3 cards are covered. • Terminals for ground clipping are provided. Space saving Smaller size reduces occupied area on PC boards as compared to previous products. Reduced Height: Connector height is minimized to 5.6mm, making possible thinner product designs. Eject mechanism with high-level functionality Hirose Electric's original ejection mechanism provides an higher degree of card ejection over existing products. This improves the operational qualities of card removal. Patents pending Wide Variety of Options Available Light-weight Weight of 12.7g for normal button type helps achieve the reduced weight required in today’s products. Wide variety of options 1 Board Mounting ➀Standard type 2 Types of eject button ➀Rigid button ➂Pop-up button 3 Position of eject buttons ➀Right 4 Standoffs ➀None sProduct Specifications Ratings Current rating Voltage rating 0.5A 125V AC Operating temperature -55ç to +85ç Note.1 Storage temperature -40ç to +70ç Note.2 Operating humidity Relativehumidity 95% With no dew-fall max. Storage humidity 40% to 70% Note.2 Item Specification 1.Insulation resistance 1000M ohms min. 2.Withstanding voltage No flashover or insulation breakdown. 3.Contact resistance 60m ohms max. initial value 4.Vibration sOrdering Information SMT Unit IC11S A - 68 PLR - 1.27SF - EJ R 1 Series name IC11S 2 Standoff type Blank none A 2.2mm 3 Number of contacts 68 5 1.27SF 1.27mm pitch SMT connector 6 With ejector EJ with ejector 7 Eject button positions R right L left Guide Unit IC11S A - BUR - FEJ R 8 Series name IC11S 9 Standoff type Blank none A 2.2mm 11 Eject button type EJ rigid button FEJ Foldering button PEJ POP-UP button 12 Eject button positions R right L left Note. IC11S Series will be used in combination of SMT unit with guide unit. When using, please select the same type for the following items. Please note that other combinations cannot be used. • Series name • Standoff • Board-installed type • Eject button positions 4 10 7 12 sStandard Right rigid button type SMT unit 1 No.1 GND No.35 No.2 No.36 MAX No.68 GND No.34 eject metal fittings movable range C 10MAX 7MAX PUSH PUSH in card insertion stroke:9 guide unit 2 No.1 No.2 No.34 No.35 No.36 No.68 Standoff type ➀SMT unit CL No. sOrdering Information qSMT Unit IC11S A - 68 PLR - 1.27SF - EJ R 1 Series name IC11S 2 Standoff type 5 1.27SF 1.27mm pitch SMT connector 6 With ejector 7 Eject button positions R right L left qGuide Unit IC11S A - BUR - PNEJ R 8 Series name IC11S 11 Eject button type 9 Standoff type PNEJ POP-UP button Blank none A 2.2mm 10 Board Mounting Method 12 Eject button positions BD standard type R right L left Note. IC11S Series will be used in combination of SMT unit with guide unit. When using, please select the same type for the following items. Note that other combinations cannot be used. • Series name • Standoff type • Board Mounting Method • Eject button positions 4 10 7 12 sStandard Right POP-UP button type SMT Unit 1 PUSH No.35 No.1 GND P=0.635 No.2 No.36 No.34 No.68 GND eject metal fittings movable range C 10MAX 7 MAX PUSH button thrust position button stored position NDRA 5 10.1 Pop-up volume Guide unit 2 No.1 No.2

PDF Datasheet Preview

Single Slot SMT Connectors For Card-Bus Based PC Cards

IC11S Series

PC Card Standard Compliant

Reduced height 5.6mm high
sFeatures

PC Card Standard compliant:
• Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a grounding plate and 8 grounding contacts.
• Type 1, type 2 and type 3 cards are covered.
• Terminals for ground clipping are provided.

Space saving

Smaller size reduces occupied area on PC boards as compared to previous products.

Reduced Height:

Connector height is minimized to 5.6mm, making possible thinner product designs.

Eject mechanism with high-level functionality

Hirose Electric's original ejection mechanism provides an higher degree of card ejection over existing products. This improves the operational qualities of card removal. Patents pending

Wide Variety of Options Available

Light-weight

Weight of 12.7g for normal button type helps achieve the reduced weight required in today’s products.

Wide variety of options
1 Board Mounting
➀Standard type
2 Types of eject button
➀Rigid button ➂Pop-up button
3 Position of eject buttons
➀Right
4 Standoffs
➀None
sProduct Specifications

Ratings

Current rating Voltage rating
0.5A 125V AC

Operating temperature -55ç to +85ç Note.1 Storage temperature -40ç to +70ç Note.2

Operating humidity

Relativehumidity 95% With no dew-fall
max.

Storage
humidity
40% to 70% Note.2

Item

Specification
1.Insulation resistance 1000M ohms min. 2.Withstanding voltage No flashover or insulation breakdown.
3.Contact resistance 60m ohms max. initial value
4.Vibration
sOrdering Information

SMT Unit

IC11S A - 68 PLR - 1.27SF - EJ R
1 Series name IC11S
2 Standoff type Blank none A 2.2mm
3 Number of contacts 68
5 1.27SF 1.27mm pitch SMT connector
6 With ejector EJ with ejector
7 Eject button positions R right L left

Guide Unit

IC11S A - BUR - FEJ R
8 Series name IC11S
9 Standoff type Blank none A 2.2mm
11 Eject button type EJ rigid button FEJ Foldering button PEJ POP-UP button
12 Eject button positions R right L left

Note. IC11S Series will be used in combination of SMT unit with guide unit. When using, please select the same type for the following items. Please note that other combinations cannot be used.
• Series name
• Standoff
• Board-installed type
• Eject button positions
4 10 7 12
sStandard

Right rigid button type

SMT unit 1

No.1 GND

No.35 No.2 No.36

MAX No.68

GND No.34
eject metal fittings movable range C
10MAX 7MAX

PUSH

PUSH
in card insertion
stroke:9
guide unit 2

No.1

No.2

No.34

No.35

No.36

No.68

Standoff type
➀SMT unit

CL No.
sOrdering Information
qSMT Unit

IC11S A - 68 PLR - 1.27SF - EJ R
1 Series name IC11S 2 Standoff type
5 1.27SF 1.27mm pitch SMT connector
6 With ejector
7 Eject button positions R right L left
qGuide Unit

IC11S A - BUR - PNEJ R
8 Series name IC11S
11 Eject button type
9 Standoff type

PNEJ POP-UP button

Blank none

A 2.2mm
10 Board Mounting Method
12 Eject button positions

BD standard type

R right

L left

Note. IC11S Series will be used in combination of SMT unit with guide unit. When using, please select the same type for the following items. Note that other combinations cannot be used.
• Series name
• Standoff type
• Board Mounting Method
• Eject button positions
4 10 7 12
sStandard

Right POP-UP button type

SMT Unit 1

PUSH

No.35 No.1 GND

P=0.635

No.2 No.36

No.34

No.68 GND
eject metal fittings movable range C
10MAX 7 MAX

PUSH
button thrust position button stored position

NDRA
5 10.1 Pop-up volume

Guide unit 2

No.1

No.2

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IC11SA-PL-SF-EJR(90) Datasheet file may be downloaded here without warranties.

Datasheet ID: IC11SA-PL-SF-EJR(90) 636184