HIF5F-50DA-2.54R(71)

HIF5F-50DA-2.54R(71) Datasheet

HIF5 Series

Part	Datasheet
HIF5F-50DA-2.54R(71)	HIF5F-50DA-2.54R(71) (pdf)

Related Parts	Information
HIF5-34D-2.54R	HIF5-34D-2.54R
HIF5D-60DA-2.54R(71)	HIF5D-60DA-2.54R(71)
HIF5D-34DA-2.54R(71)	HIF5D-34DA-2.54R(71)
HIF5C-20DA-2.54R(71)	HIF5C-20DA-2.54R(71)
HIF5C-60DA-2.54R(71)	HIF5C-60DA-2.54R(71)
HIF5D-40DA-2.54R(71)	HIF5D-40DA-2.54R(71)
HIF5C-50DA-2.54R(71)	HIF5C-50DA-2.54R(71)
HIF5D-50DA-2.54R(71)	HIF5D-50DA-2.54R(71)
HIF5C-26DA-2.54R(71)	HIF5C-26DA-2.54R(71)
HIF5B-GPIN	HIF5B-GPIN

PDF Datasheet Preview
Card Edge Type Ribbon Cable Connector HIF5 Series s Applications Computers, FDD, various kinds of electronic equipment. s Features Product Variation The area to install the connector body is classified into three types according to full hole mounting area, semi-mounting area and non-mounting area. Mounting Density Enhancement This connector is designed so that the ribbon cable can turn back within the connector molding range. The connector can be installed without coming out of the insulator. Applicable Cable The applicable cable is a <UL2651>AWG#28 flat cable 7 pcs./0.127mm, jacket dia. 0.8~1.0mm . s Product Specifications Rating Current rating 1A Voltage rating 200V AC Operating Temperature to +85ç Note 1 Storage Temperature to +60ç Note 2 Operating Moisture Range:40 to 80% Storage Humidity Range:40 to 70% Note 2 Item Specification Insulation Resistance 1000M ohms min. Withstanding voltage No flashover or insulation breakdown. Contact Resistance 15m ohms max. Vibration No electrical discontinuity of 1µs or more Humidity Steady state Insulation resistance 1000M ohms min. Temperature Cycle No damage, cracks, or parts looseness. Condition 500V DC 650V AC/1 minute 0.1A Frequency 10 to 55 Hz, single amplitude of mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% 30 minutes ➝15 to 35ç 5 minutes max. 125ç 30 minutes ➝15 to 35ç 5 minutes max. 5 cycles Operating Life Resistance to Soldering heat Contact resistance15m ohms max. 500 cycles Flow 260ç for 10 seconds No deformation of components affecting performance. Manual soldering 300ç for 3 seconds Note 1 Includes temperature rise caused by current flow. Note 2 The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. s Material Part Insulator Structure of Material PBT Copper alloy Finish Black Contact area s Ordering Information HIF5 B - * D A - R 1 Series Name HIF 5 2 Mold type B With full mounting hole C With half mounting hole D Without mounting hole 3 Number of contacts 20, 26, 34, 40, 50, 60 4 Contact alignment D Double 5 Plating type A Selective gold plating 6 Contact Pitch 2.54mm 7 Connection type R Ribbon cable s With Mounting Full Hole CL No. Number of Contacts A B C D E F H HIF5B-20DA-2.54R 564-0014-5 HIF5B-26DA-2.54R 564-0015-8 HIF5B-34DA-2.54R 564-0016-0 HIF5B-40DA-2.54R 564-0017-3 HIF5B-50DA-2.54R 564-0018-6 HIF5B-60DA-2.54R 564-0019-9 s With Mounting Half hole CL No. Number of Contacts A B C D E F H HIF5C-20DA-2.54R 564-0020-8 HIF5C-26DA-2.54R 564-0021-0 HIF5C-34DA-2.54R 564-0022-3 HIF5C-40DA-2.54R 564-0023-6 HIF5C-50DA-2.54R 564-0024-9 HIF5C-60DA-2.54R 564-0025-1 s Without Mounting Hole CL No. Number of Contacts A B C D E HIF5D-20DA-2.54R 564-0026-4 HIF5D-26DA-2.54R 564-0027-7 HIF5D-34DA-2.54R 564-0028-0 HIF5D-40DA-2.54R 564-0029-2 HIF5D-50DA-2.54R 564-0030-1 HIF5D-60DA-2.54R 564-0031-4 BPCB mounting pattern Number of Contacts A B Note. Using the polarizing key prevents mis-insertion in the printed board. For use, insert the polarizing key so as to hit the mold bottom. BPolarizing Key Part Number CR7C-GPIN HIF5B-GPIN BPanel Cutouts CL No. 507-0055-8 564-0052-4 Material Poly acetal resin, white PBT, beige Number of Contacts mounting Half hole size A mounting Full hole

PDF Datasheet Preview

Card Edge Type Ribbon Cable Connector

HIF5 Series
s Applications

Computers, FDD, various kinds of electronic equipment.
s Features

Product Variation

The area to install the connector body is classified into three types according to full hole mounting area, semi-mounting area and non-mounting area.

Mounting Density Enhancement

This connector is designed so that the ribbon cable can turn back within the connector molding range. The connector can be installed without coming out of the insulator.

Applicable Cable

The applicable cable is a <UL2651>AWG#28 flat cable 7 pcs./0.127mm, jacket dia. 0.8~1.0mm .
s Product Specifications

Rating

Current rating 1A Voltage rating 200V AC

Operating Temperature to +85ç Note 1 Storage Temperature to +60ç Note 2 Operating Moisture Range:40 to 80% Storage Humidity Range:40 to 70% Note 2

Item

Specification

Insulation Resistance 1000M ohms min.

Withstanding voltage No flashover or insulation breakdown.

Contact Resistance 15m ohms max.

Vibration

No electrical discontinuity of 1µs or more

Humidity Steady state Insulation resistance 1000M ohms min.

Temperature Cycle No damage, cracks, or parts looseness.

Condition 500V DC 650V AC/1 minute 0.1A Frequency 10 to 55 Hz, single amplitude of mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% 30 minutes ➝15 to 35ç 5 minutes max. 125ç 30 minutes ➝15 to 35ç 5 minutes max. 5 cycles

Operating Life Resistance to

Soldering heat

Contact resistance15m ohms max.
500 cycles

Flow 260ç for 10 seconds No deformation of components affecting performance.

Manual soldering 300ç for 3 seconds

Note 1 Includes temperature rise caused by current flow. Note 2 The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature

Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
s Material

Part Insulator

Structure of

Material PBT

Copper alloy

Finish

Black

Contact area
s Ordering Information

HIF5 B - * D A - R
1 Series Name HIF 5 2 Mold type B With full mounting hole

C With half mounting hole D Without mounting hole 3 Number of contacts 20, 26, 34, 40, 50, 60
4 Contact alignment D Double 5 Plating type A Selective gold plating 6 Contact Pitch 2.54mm 7 Connection type R Ribbon cable
s With Mounting Full Hole

CL No. Number of Contacts A B C D E F H

HIF5B-20DA-2.54R 564-0014-5

HIF5B-26DA-2.54R 564-0015-8

HIF5B-34DA-2.54R 564-0016-0

HIF5B-40DA-2.54R 564-0017-3

HIF5B-50DA-2.54R 564-0018-6

HIF5B-60DA-2.54R 564-0019-9
s With Mounting Half hole

CL No. Number of Contacts A B C D E F H

HIF5C-20DA-2.54R 564-0020-8

HIF5C-26DA-2.54R 564-0021-0

HIF5C-34DA-2.54R 564-0022-3

HIF5C-40DA-2.54R 564-0023-6

HIF5C-50DA-2.54R 564-0024-9

HIF5C-60DA-2.54R 564-0025-1
s Without Mounting Hole

CL No. Number of Contacts A B C D E

HIF5D-20DA-2.54R 564-0026-4

HIF5D-26DA-2.54R 564-0027-7

HIF5D-34DA-2.54R 564-0028-0

HIF5D-40DA-2.54R 564-0029-2

HIF5D-50DA-2.54R 564-0030-1

HIF5D-60DA-2.54R 564-0031-4

BPCB mounting pattern

Number of Contacts A B

Note. Using the polarizing key prevents mis-insertion in the printed board. For use, insert the polarizing key so as to hit the mold bottom.

BPolarizing Key

Part Number CR7C-GPIN HIF5B-GPIN

BPanel Cutouts

CL No. 507-0055-8 564-0052-4

Material Poly acetal resin, white PBT, beige

Number of Contacts
mounting Half hole
size A
mounting Full hole

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HIF5F-50DA-2.54R(71) Datasheet file may be downloaded here without warranties.

Datasheet ID: HIF5F-50DA-2.54R(71) 636168