HIF2C-60DT-1.27R

HIF2C-60DT-1.27R Datasheet

HIF2C Series

Part	Datasheet
HIF2C-60DT-1.27R	HIF2C-60DT-1.27R (pdf)

Related Parts	Information
HIF2C-GPB26	HIF2C-GPB26
HIF2C-34DT-1.27R(01)	HIF2C-34DT-1.27R(01)
HIF2C-40DT-1.27R	HIF2C-40DT-1.27R
HIF2C-30DT-1.27R(01)	HIF2C-30DT-1.27R(01)
HIF2C-50DT-1.27R(01)	HIF2C-50DT-1.27R(01)
HIF2C-34DT-1.27R	HIF2C-34DT-1.27R
HIF2C-20DT-1.27R	HIF2C-20DT-1.27R
HIF2C-10DT-1.27R(01)	HIF2C-10DT-1.27R(01)
HIF2C-20DT-1.27R(01)	HIF2C-20DT-1.27R(01)
HIF2C-26DT-1.27R	HIF2C-26DT-1.27R
HIF2C-16DT-1.27R	HIF2C-16DT-1.27R
HIF2C-10DT-1.27R	HIF2C-10DT-1.27R
HIF2C-16DT-1.27R(01)	HIF2C-16DT-1.27R(01)
HIF2C-26DT-1.27R(01)	HIF2C-26DT-1.27R(01)

PDF Datasheet Preview
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. Staggered Connector Directly Mounted on Board HIF2C Series • Features Directly Mounted on Board This connector can be directly mounted on the board using 1.27mm pitch flat cable. Variation in Number of Contacts The number of contacts contains 10, 16, 20, 26, 30, 34, 40, 50, and 60 contacts. Low Profile Type The connector height is lower than that of the HIF2E series. Applicable Cable The applicable cable is UL2651 AWG#28 flat cable 7 • Applications cores./0.127mm, jacket dia. to 1.0mm . Computers, terminal equipment, PPC, various kinds of electronic equipment, business machines, etc. • Product Specifications Rating Current rating 1A Voltage rating 200V AC Operating Temperature to +85ç Note 1 Storage Temperature to +60ç Note 2 Operating Moisture Range:40 to 80% Storage Humidity Range:40 to 70% Note 2 Item Specification Insulation Resistance 1000M ohms min. Withstanding voltage No flashover or insulation breakdown. Contact Resistance 15m ohms max. Vibration No electrical discontinuity of 1us or more Humidity Steady state Insulation resistance 1000M ohms min. Temperature Cycle No damage, cracks, or parts looseness. Condition 500V DC 650V AC/1 minute 0.1A Frequency 10 to 55 Hz, single amplitude of mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% 30 minutes ➝15 to 35ç 5 minutes max. 125ç 30 minutes ➝15 to 35ç 5 minutes max. 5 cycles Resistance to Soldering heat Solder Bath 260ç for 10 seconds No deformation of components affecting performance. Manual soldering 360ç for 5 seconds Note 1 Includes temperature rise caused by current flow. Note 2 The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. • Material Part Insulator Contact Material PBT Beryllium copper • Ordering Information HIF2C - * DT - R 1 Series Name HIF 2C 2 Number of contacts 10, 16, 20, 26, 30, 34, 40, 50, and 60 3 Contact alignment DT staggered 4 Contact Pitch 1.27mm 5 Connection type R ribbon cable The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHHS orCwoillnbne on the Hirose website RoHS search at or contact your Hirose sales representative. Part Number CL No. Number of Contacts HIF2C-10DT-1.27R 01 561-0075-0-01 HIF2C-16DT-1.27R 01 561-0077-6-01 HIF2C-20DT-1.27R 01 561-0079-1-01 HIF2C-26DT-1.27R 01 561-0081-3-01 HIF2C-30DT-1.27R 01 561-0083-9-01 HIF2C-34DT-1.27R 01 561-0085-4-01 HIF2C-40DT-1.27R 01 561-0087-0-01 HIF2C-50DT-1.27R 01 561-0089-5-01 HIF2C-60DT-1.27R 01 561-0091-7-01 B RoHS YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the HirosHe IwFeb2sCiteSRoeHrSiesesa●rcSh atat oirrceocnttalcyt yMouoruHnirtoesedsaolens rBeporaesredntative. BPCB mounting pattern 10 contacts 16 contacts 20 contacts 26 contacts 30 contacts The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHHS orCwoillnbne on the Hirose website RoHS search at or contact your Hirose sales representative. BPCB mounting pattern 34 contacts 40 contacts 50 contacts 60 contacts

PDF Datasheet Preview

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative.

Staggered Connector Directly Mounted on Board

HIF2C Series
• Features

Directly Mounted on Board

This connector can be directly mounted on the board
using 1.27mm pitch flat cable.

Variation in Number of Contacts

The number of contacts contains 10, 16, 20, 26, 30, 34,
40, 50, and 60 contacts.

Low Profile Type

The connector height is lower than that of the HIF2E series.

Applicable Cable

The applicable cable is UL2651 AWG#28 flat cable 7
• Applications
cores./0.127mm, jacket dia. to 1.0mm .

Computers, terminal equipment, PPC, various kinds of electronic equipment, business machines, etc.
• Product Specifications

Rating

Current rating 1A Voltage rating 200V AC

Operating Temperature to +85ç Note 1 Storage Temperature to +60ç Note 2 Operating Moisture Range:40 to 80% Storage Humidity Range:40 to 70% Note 2

Item

Specification

Insulation Resistance 1000M ohms min.

Withstanding voltage No flashover or insulation breakdown.

Contact Resistance 15m ohms max.

Vibration

No electrical discontinuity of 1us or more

Humidity Steady state Insulation resistance 1000M ohms min.

Temperature Cycle No damage, cracks, or parts looseness.

Condition 500V DC 650V AC/1 minute 0.1A Frequency 10 to 55 Hz, single amplitude of mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95%
30 minutes ➝15 to 35ç 5 minutes max. 125ç 30 minutes ➝15 to 35ç 5 minutes max. 5 cycles

Resistance to Soldering heat

Solder Bath 260ç for 10 seconds No deformation of components affecting performance.

Manual soldering 360ç for 5 seconds

Note 1 Includes temperature rise caused by current flow. Note 2 The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature

Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown.
• Material

Part Insulator Contact

Material

PBT Beryllium copper
• Ordering Information

HIF2C - * DT - R
1 Series Name HIF 2C 2 Number of contacts 10, 16, 20, 26, 30, 34, 40, 50, and 60 3 Contact alignment DT staggered
4 Contact Pitch 1.27mm 5 Connection type R ribbon cable

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHHS orCwoillnbne on the Hirose website RoHS search at or contact your Hirose sales representative.

Part Number CL No. Number of Contacts

HIF2C-10DT-1.27R 01 561-0075-0-01

HIF2C-16DT-1.27R 01 561-0077-6-01

HIF2C-20DT-1.27R 01 561-0079-1-01

HIF2C-26DT-1.27R 01 561-0081-3-01

HIF2C-30DT-1.27R 01 561-0083-9-01

HIF2C-34DT-1.27R 01 561-0085-4-01

HIF2C-40DT-1.27R 01 561-0087-0-01

HIF2C-50DT-1.27R 01 561-0089-5-01

HIF2C-60DT-1.27R 01 561-0091-7-01

B RoHS YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the HirosHe IwFeb2sCiteSRoeHrSiesesa●rcSh atat oirrceocnttalcyt yMouoruHnirtoesedsaolens rBeporaesredntative.

BPCB mounting pattern
10 contacts
16 contacts
20 contacts 26 contacts 30 contacts

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHHS orCwoillnbne on the Hirose website RoHS search at or contact your Hirose sales representative.

BPCB mounting pattern
34 contacts
40 contacts
50 contacts
60 contacts

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HIF2C-60DT-1.27R Datasheet file may be downloaded here without warranties.

Datasheet ID: HIF2C-60DT-1.27R 636166