H.FL-DFS111A/CR-AD(65)

H.FL-DFS111A/CR-AD(65) Datasheet

H.FL-DFS111A/CR-AD

Part	Datasheet
H.FL-DFS111A/CR-AD(65)	H.FL-DFS111A/CR-AD(65) (pdf)

Related Parts	Information
H.FL-DFS111A/CR-AD(64)	H.FL-DFS111A/CR-AD(64)
H.FL-DFS111A/CR-AD(63)	H.FL-DFS111A/CR-AD(63)
H.FL-DFS111A/CR-AD(62)	H.FL-DFS111A/CR-AD(62)
H.FL-DFS111A/CR-AD(61)	H.FL-DFS111A/CR-AD(61)
H.FL-DFS111A/CR-AD(66)	H.FL-DFS111A/CR-AD(66)
H.FL-DFS111A/CR-AD	H.FL-DFS111A/CR-AD

PDF Datasheet Preview
Wire connection jig H.FL-DFS111A/CR-AD Others, machine tools and jigs CM-105 AP105-H/FL INSTRUCTION MANUAL CAUTION : HIROSE ELECTRIC CO., LTD. FOR SAFE OPERATION Because of the design, there is always a possibility of contact with moving parts. The operators of the machine and the maintenance personnel who are in charge of maintenance and repair work are required to read the following SAFETY INSTRUCTIONS so as to avoid injury. To fully understand the descriptions given in this Instruction Manual and the warning labels attached on the machine, the warning messages are used in accordance with the below-stated classification. Please be sure to thoroughly understand the messages and follow the instructions. I Description of warning messages Used in the case where it is assumed that misuse of the machine will expose the operator to DANGER immediate danger of major injury or death. WARNING Used in the case where it is assumed that misuse of the machine can expose the operator to danger of major injury or death. Used in the case where it is assumed that misuse of the machine can expose the operator to CAUTION danger of injury and can cause damage to property. * Determine the degree of impairment referring to the below-stated classification. Major injury Indicates the loss of eyesight, wounds, burns hyperthermal and hypothermal burns , electric shocks, fracture of a bone, poisoning, etc. requiring emergency of extended medical care. Injury Minor injury Indicates wounds, burns, electric shocks, etc. requiring medical treatment. Damage to property Indicates damage to the machinery and or the surrounding area. SAFETY INSTRUCTIONS CAUTION Basic safety instructions Be sure to read this Instruction Manual and all the instructions and other materials supplied with the unit as Safety device and warning labels To avoid possible accidents due to lack of the safety device, be sure to operate the machine after ascertaining that the safety device is properly installed at the predetermined position. Refer to page iv for detailed description of the safety device. Once the safety device is detached from the machine, replace it to its original position and check to be sure that it properly functions. Application This machine shall only be used for its originally intended purpose while following the instructions specified in this Instruction Manual. Hirose assumes no responsibility for any use of the machine other than the intended use. Modifications to this machine is prohibited. We assume no responsibility for accidents resulting from modifications. Operating environment To avoid possible accidents caused by maloperation of the machine, use the machine under the environment that is not affected by a substantial noise source electromagnetic wave such as a high-frequency welder. To avoid possible accidents caused by maloperation of the machine, never use the machine under the environment where the voltage exceeds of the rated voltage. To avoid possible accidents caused by maloperation of the machine, put any device such as an air cylinder that operates by the pneumatic pressure into service after checking to ascertain that the specified pressure is provided. To ensure safety in operation, use the machine under the following environment. Ambient temperature during operation 5 C to 35 C Relative humidity during operation 35 % to 85 % When the operating environment of the machine is suddenly changed such as in the case where it is moved from a cold place to a warm place, dew condensation can occur. To avoid possible accidents caused by breakage or maloperation of the electrical parts due to dew condensation, be sure to wait for a sufficient period of time until there is no possibility of presence of water drops inside the machine before turning the power on. To avoid possible accidents caused by breakage or maloperation of the electrical parts, be sure to stop operation and disconnect the power plug for safety in case of thunder and lightning. Training To prevent possible accidents caused by unfamiliarity with the operation of the machine, the machine shall only be allowed to be used by the operators who have been trained for proper operation and provided with sufficient knowledge of safe operation by the employee. For this purpose, the employer shall establish a training plan and implement it for the operators beforehand. Working wear To protect against possible accidents resulting in personal injury by your cloths being caught in the machine, be sure wear a work uniform and securely fasten buttons on the sleeve cuffs and close the zipper on the top center plait of the uniform, if any. Avoid wearing loosely fitted clothing. The operator should fasten hair securely to avoid his/her hair from being caught in the machine. The operator should wear close toe, rubber sole shoes. Cases which require the power to be turned off Turn-off of the power means the state where the power switch is turned off and power plug is detached from the receptacle. This will also apply to the following. If there is any sign of abnormal conditions or failure, or in the case of power failure, be sure to immediately turn the power off. To avoid possible accidents due to an abrupt start of the machine, be sure to turn the power off in prior to inspection, repair or cleaning of the machine or before leaving from the machine.

PDF Datasheet Preview

Wire connection jig

H.FL-DFS111A/CR-AD

Others, machine tools and jigs

CM-105 AP105-H/FL

INSTRUCTION MANUAL

CAUTION :

HIROSE ELECTRIC CO., LTD.

FOR SAFE OPERATION

Because of the design, there is always a possibility of contact with moving parts. The operators of the machine and the maintenance personnel who are in charge of maintenance and repair work are required to read the following SAFETY INSTRUCTIONS so as to avoid injury. To fully understand the descriptions given in this Instruction Manual and the warning labels attached on the machine, the warning messages are used in accordance with the below-stated classification. Please be sure to thoroughly understand the messages and follow the instructions.

I Description of warning messages

Used in the case where it is assumed that misuse of the machine will expose the operator to

DANGER immediate danger of major injury or death.

WARNING Used in the case where it is assumed that misuse of the machine can expose the operator to danger of major injury or death.

Used in the case where it is assumed that misuse of the machine can expose the operator to

CAUTION danger of injury and can cause damage to property.
* Determine the degree of impairment referring to the below-stated classification.

Major injury

Indicates the loss of eyesight, wounds, burns hyperthermal and hypothermal burns , electric shocks,
fracture of a bone, poisoning, etc. requiring emergency of extended medical care.

Injury Minor injury Indicates wounds, burns, electric shocks, etc. requiring medical treatment.

Damage to property Indicates damage to the machinery and or the surrounding area.

SAFETY INSTRUCTIONS

CAUTION

Basic safety instructions Be sure to read this Instruction Manual and all the instructions and other materials supplied with the unit as

Safety device and warning labels To avoid possible accidents due to lack of the safety device, be sure to operate the machine after ascertaining that the
safety device is properly installed at the predetermined position. Refer to page iv for detailed description of the safety device. Once the safety device is detached from the machine, replace it to its original position and check to be sure that it properly functions.

Application This machine shall only be used for its originally intended purpose while following the instructions specified in this

Instruction Manual. Hirose assumes no responsibility for any use of the machine other than the intended use. Modifications to this machine is prohibited. We assume no responsibility for accidents resulting from modifications.

Operating environment To avoid possible accidents caused by maloperation of the machine, use the machine under the environment that is
not affected by a substantial noise source electromagnetic wave such as a high-frequency welder. To avoid possible accidents caused by maloperation of the machine, never use the machine under the environment
where the voltage exceeds of the rated voltage. To avoid possible accidents caused by maloperation of the machine, put any device such as an air cylinder that operates
by the pneumatic pressure into service after checking to ascertain that the specified pressure is provided. To ensure safety in operation, use the machine under the following environment.

Ambient temperature during operation 5 C to 35 C Relative humidity during operation 35 % to 85 % When the operating environment of the machine is suddenly changed such as in the case where it is moved from a cold place to a warm place, dew condensation can occur. To avoid possible accidents caused by breakage or maloperation of the electrical parts due to dew condensation, be sure to wait for a sufficient period of time until there is no possibility of presence of water drops inside the machine before turning the power on. To avoid possible accidents caused by breakage or maloperation of the electrical parts, be sure to stop operation and disconnect the power plug for safety in case of thunder and lightning.

Training To prevent possible accidents caused by unfamiliarity with the operation of the machine, the machine shall only be
allowed to be used by the operators who have been trained for proper operation and provided with sufficient knowledge of safe operation by the employee. For this purpose, the employer shall establish a training plan and implement it for the operators beforehand.

Working wear To protect against possible accidents resulting in personal injury by your cloths being caught in the machine, be sure
wear a work uniform and securely fasten buttons on the sleeve cuffs and close the zipper on the top center plait of the uniform, if any. Avoid wearing loosely fitted clothing. The operator should fasten hair securely to avoid his/her hair from being caught in the machine. The operator should wear close toe, rubber sole shoes.

Cases which require the power to be turned off

Turn-off of the power means the state where the power switch is turned off and power plug is detached from the receptacle. This will also apply to the following.

If there is any sign of abnormal conditions or failure, or in the case of power failure, be sure to immediately turn the power off.

To avoid possible accidents due to an abrupt start of the machine, be sure to turn the power off in prior to inspection, repair or cleaning of the machine or before leaving from the machine.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived H.FL-DFS111A/CR-AD(65) Datasheet file may be downloaded here without warranties.

Datasheet ID: H.FL-DFS111A/CR-AD(65) 636162