FH26W-57S-0.3SHW(15)

FH26W-57S-0.3SHW(15) Datasheet

FH26 Series

Part	Datasheet
FH26W-57S-0.3SHW(15)	FH26W-57S-0.3SHW(15) (pdf)

PDF Datasheet Preview
0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors FH26 Series GSpace saving 51 pos. shown 1.0mm 3.2mm 16.8mm Metal fittings do no protrude outside of the connector body IFeatures Extremely light weight The typical version, with all 51 contacts loaded, weights only grams. Easy solderability on the PC board The soldering leads are on mm pitch, exiting on front and back of the connector. Conductive traces on the PCB can run under the connector No exposed contacts on the bottom of the connector. Easy FPC insertion and reliable electrical connection Proven Flip LockR actuator allows easy insertion of FPC. Tactile sensation when fully closed confirms complete electrical and mechanical connection. Accepts standard thickness FPC 0.2mm thick standard Flexible Printed Circuit board can be used. This is the only ultra-low profile ZIF connector allowing the use of standard FPC. Board placement with automatic equipment Flat top surface and packaging on the tape-and-reel allows use of vacuum nozzles. Standard reel contains 5,000 connectors. The connector does not use chlorine and bromine exceeding standard limits. FH26W series * Defined in accordance with IEC61249-2-21 Br 900ppm or lower, Cl 900ppm or lower, Br + Cl 1,500ppm or lower Available for 500 pieces packaging Although the normal product is 5,000 pieces per reel, 500 winds per reel is also available. Emboss reel external diameter is Ø180mm. GCan be mounted over conductive traces. No exposed contacts on the bottom of the connector GOperation 11 AAccttuuaattoorr ooppeenn 22 IInnsseerrtt FFPPCC Actuator w FPC 33 CClloossee tthhee aaccttuuaattoorr 44 FFPPCC ccoonnnneecctteedd FH26 SeriesG0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors ISpecifications Rating Current rating 0.2A DC Voltage rating 30V AC Operating temperature range -55 ç to +85ç Note 1 Operating humidity range Relative humidity 90% max. No condensation Storage temperature range -10ç to +50ç Note 2 Storage humidity range Relative humidity 90% max. Recommended FPC : Thickness = 0.2±0.03mm gold plated Item IOrdering information FH 26 W - 51S - SHW 05 1 Series name FH 2 Series No. 26 3 Blank Standard W Satisfies halogen-free requirements Flame retardance UL94HB . 4 Number of positions 13 to 71 5 Contact pitch 0.3mm 6 Termination type SHW SMT horizontal staggered mounting type 7 Specifications plating, 5,000 pieces / reel plating with nickel barrier, 5,000 pieces / reel plating, 500 pieces / reel plating with nickel barrier, 500 pieces / reel FH26 SeriesG0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors IConnector Dimensions A Number of contacts indicator D FPC insertion slot dimension E Notes 1 2 3 4 The coplanarity of each terminal lead within specified dimension is mm Max. Packaged on tape and reel only. Check packaging specification. Slight variations in color of the plastic compounds do not affect form, fit or function of the connector. After reflow, the terminal plating may change color, however this does not represent a quality issue. FH26-13S-0.3SHW FH26-15S-0.3SHW FH26-17S-0.3SHW FH26-21S-0.3SHW FH26-23S-0.3SHW FH26-25S-0.3SHW FH26-27S-0.3SHW FH26-29S-0.3SHW FH26-31S-0.3SHW FH26-33S-0.3SHW FH26-35S-0.3SHW FH26-37S-0.3SHW FH26-39S-0.3SHW FH26-41S-0.3SHW FH26-45S-0.3SHW FH26-51S-0.3SHW FH26-55S-0.3SHW FH26-57S-0.3SHW FH26-61S-0.3SHW FH26-71S-0.3SHW CL No. Number of Contacts 580-0209-3- 580-0218-4- 580-0217-1- 580-0207-8- 580-0203-7- 580-0208-0- 580-0204-0- 580-0216-9- 580-0214-3- 580-0210-2- 580-0205-2- 580-0224-7- 580-0201-1- 580-0206-5- 580-0211-5- 580-0200-9- 580-0221-9- 580-0212-8- 580-0213-0- 580-0202-4- CL No. Number of Contacts FH26W-13S-0.3SHW 580-2401-1- FH26W-15S-0.3SHW Note1 Embossed tape reel packaging. Order by number of reels. Note2 Specification. Refer to ordering information. All dimensions mm 0.55:Metal mask FH26 SeriesG0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors IRecommended PCB mounting pattern and metal mask dimensions B±0.05 0.23:Metal mask Recommended metal mask thickness t=0.1 Outline of the connector 0.7:Metal mask 0.65:Metal mask 0.23:Metal mask C±0.05 0.3:Metal mask IRecommended FPC Dimensions F±0.05 C±0.03 R0.2 MAX POSITIONS OF POINT-A dnd B Detail H Lead plated MAX MIN. Stiffener B±0.03 1 Dimention M must be 0.5mm minimum when the stiffener is shorter than min. FH26-13S-0.3SHW FH26-15S-0.3SHW FH26-17S-0.3SHW FH26-21S-0.3SHW FH26-23S-0.3SHW FH26-25S-0.3SHW FH26-27S-0.3SHW FH26-29S-0.3SHW FH26-31S-0.3SHW FH26-33S-0.3SHW FH26-35S-0.3SHW FH26-37S-0.3SHW FH26-39S-0.3SHW FH26-41S-0.3SHW FH26-45S-0.3SHW FH26-51S-0.3SHW FH26-55S-0.3SHW FH26-57S-0.3SHW FH26-61S-0.3SHW FH26-71S-0.3SHW CL No. 580-0209-3- 580-0218-4- 580-0217-1- 580-0207-8- 580-0203-7- 580-0208-0- 580-0204-0- 580-0216-9- 580-0214-3- 580-0210-2- 580-0205-2- 580-0224-7- 580-0201-1- 580-0206-5- 580-0211-5- 580-0200-9- 580-0221-9- 580-0212-8- 580-0213-0- 580-0202-4- Number of Contacts FH26W-13S-0.3SHW FH26W-15S-0.3SHW FH26W-17S-0.3SHW FH26W-19S-0.3SHW FH26W-21S-0.3SHW FH26W-23S-0.3SHW FH26W-25S-0.3SHW FH26W-27S-0.3SHW FH26W-29S-0.3SHW FH26W-31S-0.3SHW FH26W-33S-0.3SHW FH26W-35S-0.3SHW FH26W-37S-0.3SHW FH26W-39S-0.3SHW FH26W-41S-0.3SHW FH26W-45S-0.3SHW FH26W-51S-0.3SHW FH26W-57S-0.3SHW FH26W-61S-0.3SHW FH26W-71S-0.3SHW CL No. 580-2401-1- 580-2402-4- 580-2403-7- 580-2437-9- 580-2404-0- 580-2405-2- 580-2406-5- 580-2400-9- 580-2407-8- 580-2408-0- 580-2409-3- 580-2410-2- 580-2411-5- 580-2412-8- 580-2413-0- 580-2414-3- 580-2415-6- 580-2417-1- 580-2418-4- 580-2419-7- All dimensions mm Number of Contacts FH26 SeriesG0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors IRecommended FPC Construction GContact FPC manufacturer for specific details. Using Single-sided FPC Connecting side Material Name Material Thickness µm Covering film layer. Polyimide 1 mil thick. Cover adhesive

PDF Datasheet Preview

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

FH26 Series

GSpace saving 51 pos. shown
1.0mm
3.2mm
16.8mm

Metal fittings do no protrude outside of the connector body

IFeatures

Extremely light weight

The typical version, with all 51 contacts loaded, weights only grams.

Easy solderability on the PC board

The soldering leads are on mm pitch, exiting on front and back of the connector.

Conductive traces on the PCB can run under the connector

No exposed contacts on the bottom of the connector.

Easy FPC insertion and reliable electrical connection

Proven Flip LockR actuator allows easy insertion of FPC. Tactile sensation when fully closed confirms complete electrical and mechanical connection.

Accepts standard thickness FPC
0.2mm thick standard Flexible Printed Circuit board can be used. This is the only ultra-low profile ZIF connector allowing the use of standard FPC.

Board placement with automatic equipment

Flat top surface and packaging on the tape-and-reel allows use of vacuum nozzles. Standard reel contains 5,000 connectors.

The connector does not use chlorine and bromine exceeding standard limits. FH26W series
* Defined in accordance with IEC61249-2-21 Br 900ppm or lower, Cl 900ppm or lower, Br + Cl 1,500ppm or lower

Available for 500 pieces packaging

Although the normal product is 5,000 pieces per reel, 500 winds per reel is also available. Emboss reel external diameter is Ø180mm.

GCan be mounted over conductive traces.

No exposed contacts on the bottom of the connector

GOperation
11 AAccttuuaattoorr ooppeenn 22 IInnsseerrtt FFPPCC

Actuator
w FPC
33 CClloossee tthhee aaccttuuaattoorr 44 FFPPCC ccoonnnneecctteedd

FH26 SeriesG0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

ISpecifications

Rating

Current rating 0.2A DC Voltage rating 30V AC

Operating temperature range -55 ç to +85ç Note 1 Operating humidity range Relative humidity 90%
max. No condensation

Storage temperature range -10ç to +50ç Note 2 Storage humidity range Relative humidity 90% max.

Recommended FPC :

Thickness = 0.2±0.03mm gold plated

Item
IOrdering information

FH 26 W - 51S - SHW 05
1 Series name FH 2 Series No. 26 3 Blank Standard

W Satisfies halogen-free requirements Flame retardance UL94HB .
4 Number of positions 13 to 71 5 Contact pitch 0.3mm
6 Termination type SHW SMT horizontal staggered mounting type 7 Specifications
plating, 5,000 pieces / reel plating with nickel barrier, 5,000 pieces / reel plating, 500 pieces / reel plating with nickel barrier, 500 pieces / reel

FH26 SeriesG0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

IConnector Dimensions A

Number of contacts indicator

D FPC insertion slot dimension E

Notes 1 2 3 4

The coplanarity of each terminal lead within specified dimension is mm Max. Packaged on tape and reel only. Check packaging specification. Slight variations in color of the plastic compounds do not affect form, fit or function of the connector. After reflow, the terminal plating may change color, however this does not represent a quality issue.

FH26-13S-0.3SHW ** FH26-15S-0.3SHW ** FH26-17S-0.3SHW ** FH26-21S-0.3SHW ** FH26-23S-0.3SHW ** FH26-25S-0.3SHW ** FH26-27S-0.3SHW ** FH26-29S-0.3SHW ** FH26-31S-0.3SHW ** FH26-33S-0.3SHW ** FH26-35S-0.3SHW ** FH26-37S-0.3SHW ** FH26-39S-0.3SHW ** FH26-41S-0.3SHW ** FH26-45S-0.3SHW ** FH26-51S-0.3SHW ** FH26-55S-0.3SHW ** FH26-57S-0.3SHW ** FH26-61S-0.3SHW ** FH26-71S-0.3SHW **

CL No.

Number of Contacts
580-0209-3-**
580-0218-4-**
580-0217-1-**
580-0207-8-**
580-0203-7-**
580-0208-0-**
580-0204-0-**
580-0216-9-**
580-0214-3-**
580-0210-2-**
580-0205-2-**
580-0224-7-**
580-0201-1-**
580-0206-5-**
580-0211-5-**
580-0200-9-**
580-0221-9-**
580-0212-8-**
580-0213-0-**
580-0202-4-**

CL No.

Number of Contacts

FH26W-13S-0.3SHW **
580-2401-1-**

FH26W-15S-0.3SHW **
Note1 Embossed tape reel packaging. Order by number of reels. Note2 ** Specification. Refer to ordering information.

All dimensions mm
0.55:Metal mask

FH26 SeriesG0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

IRecommended PCB mounting pattern and metal mask dimensions

B±0.05 0.23:Metal mask

Recommended metal mask thickness t=0.1

Outline of the connector
0.7:Metal mask
0.65:Metal mask
0.23:Metal mask

C±0.05
0.3:Metal mask

IRecommended FPC Dimensions

F±0.05 C±0.03

R0.2 MAX

POSITIONS OF POINT-A dnd B

Detail H Lead plated MAX

MIN. Stiffener

B±0.03
1 Dimention M must be 0.5mm minimum when the stiffener is shorter than min.

FH26-13S-0.3SHW ** FH26-15S-0.3SHW ** FH26-17S-0.3SHW ** FH26-21S-0.3SHW ** FH26-23S-0.3SHW ** FH26-25S-0.3SHW ** FH26-27S-0.3SHW ** FH26-29S-0.3SHW ** FH26-31S-0.3SHW ** FH26-33S-0.3SHW ** FH26-35S-0.3SHW ** FH26-37S-0.3SHW ** FH26-39S-0.3SHW ** FH26-41S-0.3SHW ** FH26-45S-0.3SHW ** FH26-51S-0.3SHW ** FH26-55S-0.3SHW ** FH26-57S-0.3SHW ** FH26-61S-0.3SHW ** FH26-71S-0.3SHW **

CL No.
580-0209-3-** 580-0218-4-** 580-0217-1-** 580-0207-8-** 580-0203-7-** 580-0208-0-** 580-0204-0-** 580-0216-9-** 580-0214-3-** 580-0210-2-** 580-0205-2-** 580-0224-7-** 580-0201-1-** 580-0206-5-** 580-0211-5-** 580-0200-9-** 580-0221-9-** 580-0212-8-** 580-0213-0-** 580-0202-4-**

Number of Contacts

FH26W-13S-0.3SHW ** FH26W-15S-0.3SHW ** FH26W-17S-0.3SHW ** FH26W-19S-0.3SHW ** FH26W-21S-0.3SHW ** FH26W-23S-0.3SHW ** FH26W-25S-0.3SHW ** FH26W-27S-0.3SHW ** FH26W-29S-0.3SHW ** FH26W-31S-0.3SHW ** FH26W-33S-0.3SHW ** FH26W-35S-0.3SHW ** FH26W-37S-0.3SHW ** FH26W-39S-0.3SHW ** FH26W-41S-0.3SHW ** FH26W-45S-0.3SHW ** FH26W-51S-0.3SHW ** FH26W-57S-0.3SHW ** FH26W-61S-0.3SHW ** FH26W-71S-0.3SHW **

CL No.
580-2401-1-** 580-2402-4-** 580-2403-7-** 580-2437-9-** 580-2404-0-** 580-2405-2-** 580-2406-5-** 580-2400-9-** 580-2407-8-** 580-2408-0-** 580-2409-3-** 580-2410-2-** 580-2411-5-** 580-2412-8-** 580-2413-0-** 580-2414-3-** 580-2415-6-** 580-2417-1-** 580-2418-4-** 580-2419-7-**

All dimensions mm

Number of Contacts

FH26 SeriesG0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

IRecommended FPC Construction

GContact FPC manufacturer for specific details.

Using Single-sided FPC

Connecting side

Material Name

Material

Thickness µm

Covering film layer.

Polyimide 1 mil thick.

Cover adhesive

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FH26W-57S-0.3SHW(15) Datasheet file may be downloaded here without warranties.

Datasheet ID: FH26W-57S-0.3SHW(15) 636141