FH25-33S-0.3SH(05)

FH25-33S-0.3SH(05) Datasheet

FH25- 51S - - SH 05

Part	Datasheet
FH25-33S-0.3SH(05)	FH25-33S-0.3SH(05) (pdf)

Related Parts	Information
FH25-45S-0.3SH(05)	FH25-45S-0.3SH(05)
FH25-21S-0.3SH(05)	FH25-21S-0.3SH(05)
FH25-39S-0.3SH(05)	FH25-39S-0.3SH(05)
FH25-27S-0.3SH(05)	FH25-27S-0.3SH(05)

PDF Datasheet Preview
mm Contact Pitch, mm above the board, Flexible Printed Circuit ZIF Connectors. FH 25 Series 3.45mm 51pos. type 0.9mm 17.1mm sFeatures Extremely light weight The largest version, with all contacts loaded, weights only 0.11gramms. Conductive traces on the PCB can run under the connector No exposed contacts on the bottom of the connector. High density together with reliable solderability on the board Staggered contact points and the leads plus the nickel barriers assure sufficient distance to prevents solder bridging. Easy FPC insertion and reliable electrical connection Proven Flip actuator allows easy insertion of FPC. Tactile sensation when fully closed confirms complete electrical and mechanical connection. Accepts standard thickness FPC mm thick standard Flexible Printed Circuit board can be used. This is the only ultra-low profile ZIF connector allowing the use of standard FPC. Board placement with automatic equipment Flat top surface and packaging on the tape-and-reel allows use of vacuum nozzles. Standard reel contains 5,000 connectors. sApplications Mobile phones, PDA’s, digital cameras, digital video cameras, LCD connections, plasma displays PDP , camera modules and other compact devices requiring Flexible Printed Circuit connections using high reliability ultra-small profile connectors. No exposed contacts Metal fittings do not protrude outside of the connector body Absence of protrusions on each side of connector allows closer side-by-side mounting of the connectors or closer component placement in miniaturized devices. Nickel barrier prevents solder bridges Mounting pitch Insulator body 0.6mm Contacts 0.3mm Solid bottom surface Actuator open FPC insertion direction Actuator closed FPC fully inserted sProduct Specifications Rating Rated current A DC Rated voltage 30 V AC Operating temperature range -55ç to +85ç Note 1 Operating humidity range Relative humidity 90% max. No condensation Storage temperature range -10ç to +50ç Note 2 Storage humidity range Relative humidity 90% max. Recommended FPC Thickness = 0.2±0.03mm thick, gold plated connecting traces Item Specification sOrdering information FH25- 51S - - SH 05 1 Series name FH25 2 No. of contacts Number of contacts 21, 27, 33, 39, 45, 51 3 Contact pitch mm 4 Terminal type SH SMT horizontal mounting type 5 Plating specifications 05 Gold, selective flash plated BOperation and Precautions Operation 1.FPC insertion procedure. Connector installed on the board. 1 Lift up the actuator. Use thumb or index finger. Precautions 1 Do not apply excessive force or use any type of tool to operate the actuator. 2 Fully insert the FPC in the connector parallel to mounting surface, with the exposed conductive traces facing down. 2 The connector will assure reliable performance when the actuator is open to Do not exceed this angle, as this may cause permanent damage to the connector. FPC conductor surface Bottom side 130° 3 Rotate down the actuator until firmly closed. It is critical that the inserted FPC is not moved and remains fully inserted. 3 Exercise caution when applying upward force to the connected FPC. FPC conductor surface on opposite side. 2.FPC removal 1 Lift up the actuator. Carefully withdraw the FPC. sSpecifications ∞Number of contacts G 0.9 Including contact terminal leads Polarizing mark indicator A** Number of contacts indicator C FPC insertion slot dimension D 0 2 1 0.1MAX. 0.1MAX. 1 2 Notes 1 The coplanarity of each terminal lead is within 2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body. 3 Slight variations in color of the plastic compounds do not affect form, fit or function of the connector. Unit mm CL No. Number of Contacts

PDF Datasheet Preview

mm Contact Pitch, mm above the board, Flexible Printed Circuit ZIF Connectors.

FH 25 Series
3.45mm
51pos. type
0.9mm
17.1mm
sFeatures

Extremely light weight

The largest version, with all contacts loaded, weights only 0.11gramms.

Conductive traces on the PCB can run under the connector

No exposed contacts on the bottom of the connector.

High density together with reliable solderability on the board

Staggered contact points and the leads plus the nickel barriers assure sufficient distance to prevents solder bridging.

Easy FPC insertion and reliable electrical connection

Proven Flip actuator allows easy insertion of FPC. Tactile sensation when fully closed confirms complete electrical and mechanical connection.

Accepts standard thickness FPC
mm thick standard Flexible Printed Circuit board can be used. This is the only ultra-low profile ZIF connector allowing the use of standard FPC.

Board placement with automatic equipment

Flat top surface and packaging on the tape-and-reel allows use of vacuum nozzles. Standard reel contains 5,000 connectors.
sApplications

Mobile phones, PDA’s, digital cameras, digital video cameras, LCD connections, plasma displays PDP , camera modules and other compact devices requiring Flexible Printed Circuit connections using high reliability ultra-small profile connectors.

No exposed contacts Metal fittings do not protrude outside of the connector body

Absence of protrusions on each side of connector allows closer side-by-side mounting of the connectors or closer component placement in miniaturized devices.

Nickel barrier prevents solder bridges

Mounting pitch

Insulator body
0.6mm

Contacts
0.3mm

Solid bottom surface

Actuator open FPC insertion direction

Actuator closed

FPC fully inserted
sProduct Specifications

Rating

Rated current A DC Rated voltage 30 V AC

Operating temperature range -55ç to +85ç Note 1 Operating humidity range Relative humidity 90% max. No condensation

Storage temperature range -10ç to +50ç Note 2 Storage humidity range Relative humidity 90% max.

Recommended FPC Thickness = 0.2±0.03mm thick, gold plated connecting traces

Item

Specification
sOrdering information

FH25- 51S - - SH 05
1 Series name FH25 2 No. of contacts

Number of contacts 21, 27, 33, 39, 45, 51
3 Contact pitch mm
4 Terminal type

SH SMT horizontal mounting type
5 Plating specifications
05 Gold, selective flash plated

BOperation and Precautions

Operation
1.FPC insertion procedure. Connector installed on the board.
1 Lift up the actuator. Use thumb or index finger.

Precautions
1 Do not apply excessive force or use any type of tool to operate the
actuator.
2 Fully insert the FPC in the connector parallel to mounting surface, with
the exposed conductive traces facing down.
2 The connector will assure reliable performance when the actuator is
open to Do not exceed this angle, as this may cause permanent damage to the connector.

FPC conductor surface Bottom side
130°
3 Rotate down the actuator until firmly closed. It is critical that the
inserted FPC is not moved and remains fully inserted.
3 Exercise caution when applying upward force to the connected FPC.

FPC conductor surface on opposite side.
2.FPC removal
1 Lift up the actuator.

Carefully withdraw the FPC.
sSpecifications
∞Number of contacts G
0.9 Including contact terminal leads

Polarizing mark indicator

A** Number of contacts indicator

C FPC insertion slot dimension D
0 2 1 0.1MAX.
0.1MAX. 1 2

Notes 1 The coplanarity of each terminal lead is within 2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body. 3 Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.

Unit mm

CL No.

Number of Contacts

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FH25-33S-0.3SH(05) Datasheet file may be downloaded here without warranties.

Datasheet ID: FH25-33S-0.3SH(05) 636140