FH21-28S-1DS
FH21-28S-1DS Datasheet
FH21-05S-1DS CL586-0410-0
| Part | Datasheet |
|---|---|
FH21-28S-1DS |
FH21-28S-1DS (pdf) |
| Related Parts | Information |
|---|---|
FH21-5S-1DS |
FH21-5S-1DS |
FH21-15S-1DSA |
FH21-15S-1DSA |
FH21-5S-1DSA |
FH21-5S-1DSA |
FH21-15S-1DS |
FH21-15S-1DS |
FH21-12S-1DSA |
FH21-12S-1DSA |
FH21-14S-1DSA |
FH21-14S-1DSA |
FH21-16S-1DSA |
FH21-16S-1DSA |
FH21-8S-1DSA |
FH21-8S-1DSA |
FH21-18S-1DSA |
FH21-18S-1DSA |
FH21-10S-1DSA |
FH21-10S-1DSA |
FH21-20S-1DSA |
FH21-20S-1DSA |
FH21-22S-1DSA |
FH21-22S-1DSA |
FH21-24S-1DSA |
FH21-24S-1DSA |
FH21-26S-1DSA |
FH21-26S-1DSA |
FH21-30S-1DSA |
FH21-30S-1DSA |
FH21-16S-1DS |
FH21-16S-1DS |
FH21-6S-1DSA |
FH21-6S-1DSA |
FH21-28S-1DSA |
FH21-28S-1DSA |
FH21-14S-1DS |
FH21-14S-1DS |
FH21-6S-1DS |
FH21-6S-1DS |
FH21-8S-1DS |
FH21-8S-1DS |
FH21-10S-1DS |
FH21-10S-1DS |
FH21-12S-1DS |
FH21-12S-1DS |
FH21-30S-1DS |
FH21-30S-1DS |
FH21-18S-1DS |
FH21-18S-1DS |
FH21-20S-1DS |
FH21-20S-1DS |
FH21-22S-1DS |
FH21-22S-1DS |
FH21-24S-1DS |
FH21-24S-1DS |
FH21-26S-1DS |
FH21-26S-1DS |
| PDF Datasheet Preview |
|---|
| 1mm Pitch FPC/FFC Connector FH 21 Series sFeatures LIF Low Insertion Force Mechanism LIF mechanism secures mounting serviceability. Kink Mechanism DIP post is treated with kinks, and prevent connector floating in the soldering process. Contact Structure on Both Sides The contact structure on both sides does restrict directionality of FPC and FFC conductors. sApplications HDD, facsimiles, printers, and crystal liquie modules, etc. sProduct Specifications Rating Rated Current 0.5A Operating Temperature Range -30 ~ +70ç Note 1 Storage Temperature Range -10 ~ +50ç Note 2 Rated Voltage 50V AC Operating Humidity Range Relative humidity 90% max. Storage Humidity Range Relative Humidity 90% max. Not dewed Not dewed Applicable FPC t=0.3±0.05 Solder plating Item Specification Condition Insulation Resistance min. Measured at 100V DC Withstand voltage Neither short nor breakdown should occur 150V AC for 1 minute Contact Resistance *FPC conductor resistance included Measured at 100mA Contact resistance max. Mechanical Operation No part should be damaged, cracked, or loosened 10 cycles Electrical discontinuity, 1µS max. Frequency 10~55Hz and single amplitude 0.75mm in Vibration Contact resistance: 3 directions for 2 hours, respectively. No part should be damaged, cracked, or loosened Shock Electrical discontinuity, 1µS max. Contact resistance max. No part should be damaged, cracked, or loosened sOrdering Information Please determine the specific product. If needed, please select and order the product from the product No. as listed in this catalog on page D17 and D18. FH 21 - 10 S - 1 DS er ty q Series Name FH w Series No. e Number of Contacts 5, 6, 8, 10, 12, 14, 15, 16, 18, 20, 22, 24, 25, 28, 30 r Contact Alignment Single t Contacts Pitch 0.3mm y Contact Type DS Right angle type DSA Straight type BFPC•FFC Dimensions Note In case of FPC, specify excluding adhesive agent included in FFC. Unit mm Number of Contacts 8 10 12 14 15 16 18 20 22 24 26 28 30 Size BPCB Footprints Size Unit mm Number of Contacts 8 10 12 14 15 16 18 20 22 24 26 28 30 sRight Angle Type Product No. HRS No. Number of Contacts A FH21-05S-1DS CL586-0410-0 FH21-06S-1DS CL586-0411-2 FH21-08S-1DS CL586-0412-5 FH21-10S-1DS CL586-0413-8 FH21-12S-1DS CL586-0414-0 FH21-14S-1DS CL586-0415-3 FH21-15S-1DS CL586-0416-6 FH21-16S-1DS CL586-0417-9 FH21-18S-1DS CL586-0418-1 FH21-20S-1DS CL586-0419-4 FH21-22S-1DS CL586-0420-3 FH21-24S-1DS CL586-0421-6 FH21-26S-1DS CL586-0422-9 FH21-28S-1DS CL586-0423-1 FH21-30S-1DS CL586-0424-4 Unit mm C 04 05 07 09 11 13 14 15 17 19 21 23 25 27 29 sStraight Type |
| More datasheets: FH21-6S-1DS | FH21-8S-1DS | FH21-10S-1DS | FH21-12S-1DS | FH21-30S-1DS | FH21-18S-1DS | FH21-20S-1DS | FH21-22S-1DS | FH21-24S-1DS | FH21-26S-1DS |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FH21-28S-1DS Datasheet file may be downloaded here without warranties.