FH12-50S-0.5SH

FH12-50S-0.5SH Datasheet

FH12 Series

Part	Datasheet
FH12-50S-0.5SH	FH12-50S-0.5SH (pdf)

Related Parts	Information
FH12-49S-0.5SV	FH12-49S-0.5SV
FH12-13S-0.5SV	FH12-13S-0.5SV
FH12-34S-0.5SV	FH12-34S-0.5SV
FH12A-29S-0.5SH	FH12A-29S-0.5SH
FH12A-32S-0.5SH	FH12A-32S-0.5SH
FH12A-33S-0.5SH	FH12A-33S-0.5SH
FH12A-34S-0.5SH	FH12A-34S-0.5SH
FH12A-36S-0.5SH	FH12A-36S-0.5SH
FH12A-42S-0.5SH	FH12A-42S-0.5SH
FH12A-22S-0.5SH	FH12A-22S-0.5SH
FH12-12S-0.5SV	FH12-12S-0.5SV
FH12A-18S-0.5SH	FH12A-18S-0.5SH
FH12-15S-0.5SV	FH12-15S-0.5SV
FH12-17S-0.5SV	FH12-17S-0.5SV
FH12-18S-0.5SV	FH12-18S-0.5SV
FH12-22S-0.5SV	FH12-22S-0.5SV
FH12-26S-0.5SV	FH12-26S-0.5SV
FH12-32S-0.5SV	FH12-32S-0.5SV
FH12F-10S-0.5SH	FH12F-10S-0.5SH
FH12A-45S-0.5SH	FH12A-45S-0.5SH
FH12-32S-0.5SH	FH12-32S-0.5SH
FH12-11S-0.5SH	FH12-11S-0.5SH
FH12-12S-0.5SH	FH12-12S-0.5SH
FH12-14S-0.5SH	FH12-14S-0.5SH
FH12-15S-0.5SH	FH12-15S-0.5SH
FH12-17S-0.5SH	FH12-17S-0.5SH
FH12-19S-0.5SH	FH12-19S-0.5SH
FH12-22S-0.5SH	FH12-22S-0.5SH
FH12A-26S-0.5SH	FH12A-26S-0.5SH
FH12-28S-0.5SH	FH12-28S-0.5SH
FH12-36S-0.5SV	FH12-36S-0.5SV
FH12-33S-0.5SH	FH12-33S-0.5SH
FH12-34S-0.5SH	FH12-34S-0.5SH
FH12-36S-0.5SH	FH12-36S-0.5SH
FH12-45S-0.5SH	FH12-45S-0.5SH
FH12-53S-0.5SH	FH12-53S-0.5SH
FH12A-12S-0.5SH	FH12A-12S-0.5SH
FH12A-15S-0.5SH	FH12A-15S-0.5SH
FH12-26S-0.5SH	FH12-26S-0.5SH
FH12-22S-1SH	FH12-22S-1SH
FH12-33S-0.5SV	FH12-33S-0.5SV
FH12S-45S-0.5SH	FH12S-45S-0.5SH
FH12S-50S-0.5SH	FH12S-50S-0.5SH
FH12S-53S-0.5SH	FH12S-53S-0.5SH
FH12-5S-1SH	FH12-5S-1SH
FH12-6S-1SH	FH12-6S-1SH
FH12-7S-1SH	FH12-7S-1SH
FH12S-30S-0.5SH	FH12S-30S-0.5SH
FH12-11S-1SH	FH12-11S-1SH
FH12F-40S-0.5SH	FH12F-40S-0.5SH
FH12-26S-1SH	FH12-26S-1SH
FH12-7S-1SV	FH12-7S-1SV
FH12-8S-1SV	FH12-8S-1SV
FH12-20S-1SV	FH12-20S-1SV
FH12-22S-1SV	FH12-22S-1SV
FH12-24S-1SV	FH12-24S-1SV
FH12-6S-0.5SH	FH12-6S-0.5SH
FH12-8S-1SH	FH12-8S-1SH
FH12F-20S-0.5SH	FH12F-20S-0.5SH
FH12-45S-0.5SV	FH12-45S-0.5SV
FH12F-6S-0.5SH	FH12F-6S-0.5SH
FH12F-12S-0.5SH	FH12F-12S-0.5SH
FH12F-13S-0.5SH	FH12F-13S-0.5SH
FH12F-14S-0.5SH	FH12F-14S-0.5SH
FH12F-15S-0.5SH	FH12F-15S-0.5SH
FH12S-40S-0.5SH	FH12S-40S-0.5SH
FH12F-18S-0.5SH	FH12F-18S-0.5SH
FH12-13S-0.5SH	FH12-13S-0.5SH
FH12F-22S-0.5SH	FH12F-22S-0.5SH
FH12F-24S-0.5SH	FH12F-24S-0.5SH
FH12F-26S-0.5SH	FH12F-26S-0.5SH
FH12F-28S-0.5SH	FH12F-28S-0.5SH
FH12F-30S-0.5SH	FH12F-30S-0.5SH
FH12F-32S-0.5SH	FH12F-32S-0.5SH
FH12F-34S-0.5SH	FH12F-34S-0.5SH
FH12F-36S-0.5SH	FH12F-36S-0.5SH
FH12F-16S-0.5SH	FH12F-16S-0.5SH
FH12-30S-0.5SH(05)	FH12-30S-0.5SH(05)
FH12-6S-1SV	FH12-6S-1SV
FH12-9S-1SH	FH12-9S-1SH
FH12A-16S-0.5SH	FH12A-16S-0.5SH
FH12-18S-0.5SH	FH12-18S-0.5SH
FH12S-50S-0.5SH(05)	FH12S-50S-0.5SH(05)
FH12SYE-45S-0.5SH(55)	FH12SYE-45S-0.5SH(55)
FH12-20S-0.5SH(59)	FH12-20S-0.5SH(59)
FH12-18S-0.5SV(55)	FH12-18S-0.5SV(55)
FH12-18S-0.5SV(1)(98)	FH12-18S-0.5SV(1)(98)
FH12-50S-0.5SV	FH12-50S-0.5SV
FH12-10S-0.5SH	FH12-10S-0.5SH
FH12-14(6)SA-1SH	FH12-14(6)SA-1SH
FH12-20S-0.5SH	FH12-20S-0.5SH
FH12-40S-0.5SV	FH12-40S-0.5SV
FH12-30S-0.5SV	FH12-30S-0.5SV
FH12-24S-0.5SV	FH12-24S-0.5SV
FH12-20S-0.5SV	FH12-20S-0.5SV
FH12-10S-0.5SV	FH12-10S-0.5SV
FH12A-50S-0.5SH	FH12A-50S-0.5SH
FH12-10(4)SA-1SH	FH12-10(4)SA-1SH
FH12-24S-0.5SH	FH12-24S-0.5SH
FH12A-30S-0.5SH	FH12A-30S-0.5SH
FH12A-24S-0.5SH	FH12A-24S-0.5SH
FH12A-20S-0.5SH	FH12A-20S-0.5SH
FH12A-10S-0.5SH	FH12A-10S-0.5SH
FH12-40S-0.5SH	FH12-40S-0.5SH
FH12-30S-0.5SH	FH12-30S-0.5SH
FH12A-40S-0.5SH	FH12A-40S-0.5SH

PDF Datasheet Preview
0.5mm and 1mm Pitch Connectors For FPC/FFC FH12 Series Flip-lock sFeatures Ease of Use and Space Savings Only one finger or 6.9N Newtons of force is required to lock Hirose’s rotational actuator flip-lock as compared to using 2 fingers and 39.2N to close a FFC/FPC connector from our competition. The Flip-Lock design also allows customers to place 2 or more connectors side by side as there is no need to waste additional board space for a side latch. Strengthened Lock Lever The standard Flip-Lock requires only 2.0mm height above the board. A strengthened lock lever is available which only requires an additional 0.4mm. Supports Thin FPC 0.18mm Hirose does not require double-sided FPC to have any additional strengthening plate or stiffener and can therefore support a thickness of as little as 0.18mm +/- Hirose Ensures Reliability Hirose’s patented half tuning fork contacts maintain the required normal force without relying on the connector housing. With our competitor’s conventional products the housing walls support the contact force, which does not provide for long-term reliability. Prevention of Solder Bridge Excess solder cavity absorbs excessive solder and avoids solder bridging. Three different assembly types FH12 is offered in Top & Bottom Contact and Vertical Mount and offered in both a 0.5mm contact pitch as well as a 1.0mm contact pitch bottom contact only . sApplications Notebook computers, printers, PDAs, digital cameras and other compact devices for interconnecting the main circuit board with the LCD, HDD or other device. Rotating One-touch Mechanism q sProduct Specifications Rating Current rating 0.4A DC Operating Temperature Range:_40 to +70ç Note 1 Storage Temperature Range:_10 to +50ç Note 2 Voltage rating 50V AC Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range:Relative humidity, 90% max. Not dewed Not dewed Applicable FPC t=0.3±0.05 Solder plating Note 3 t=0.18 ± for FH12F-S-0.5SH Item Insulation resistance Withstanding voltage Contact resistance Specification 500M ohms minimum No flashover or insulation breakdown. 50m ohms maximum 100V DC 150V AC/1 minute 1mA Conditions Durability Insertion/withdrawal Contact resistance 50m ohms maximum No damage, cracks, or parts dislocation. 20 cycles Vibration No electrical discontinuity of 1µs or more Contact resistance 50m ohms maximum. No damage, cracks, or parts dislocation. Frequency 10 to 55 Hz, single amplitude of mm, 2 hours in each of the 3 directions. Shock No electrical discontinuity of 1µs or more Contact resistance 50m ohms maximum. No damage, cracks, or parts dislocation. Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis. sOrdering Information FH12 A - 10 4 - S A - SH 05 q Series Name FH12 t Contact alignment Single w Blank standard type y Eccentric direction: A Top contact type Blank standard type S Type with strengthed lock lever A Eccentric type F Type with 0.18mm FPC End Thickness u Contacts Pitch 0.5mm, 1mm e Standard type Number of contacts i Contact type Eccentric type Number of contacts in 0.5mm housing SH SMT horizontal mounting type r Standard type Blank SV SMT vertical mounting type Eccentric type Number of contacts o Plating specification No symbol Solder plating Gold plating BSeries Configuration Pitch Bottom Contact Type Top Contact Type Vertical mounting Type FH12- * S-0.5SH P.12 Number of contacts 6, 10, 11, 12, 13, 14, 0.5mm 15, 16, 17, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 33, 34, 36, 40, 45, 50, 53 Type with Strengthened Lock Lever FPC conductive surface FPC conductive surface bottom side FH12S- S-0.5SH P.13 Number of contacts 30, 40, 45, 50, 53 Type with 0.18mm FPC End Thickness FH12F- S-0.5SH P.14 Number of contacts 6, 10, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 28, 30, 32, 33 , 34, 36, 40

PDF Datasheet Preview

0.5mm and 1mm Pitch Connectors For FPC/FFC

FH12 Series

Flip-lock
sFeatures

Ease of Use and Space Savings

Only one finger or 6.9N Newtons of force is required to lock Hirose’s rotational actuator flip-lock as compared to using 2 fingers and 39.2N to close a FFC/FPC connector from our competition.

The Flip-Lock design also allows customers to place 2 or more connectors side by side as there is no need to waste additional board space for a side latch.

Strengthened Lock Lever

The standard Flip-Lock requires only 2.0mm height above the board. A strengthened lock lever is available which only requires an additional 0.4mm.

Supports Thin FPC 0.18mm

Hirose does not require double-sided FPC to have any additional strengthening plate or stiffener and can therefore support a thickness of as little as 0.18mm +/-

Hirose Ensures Reliability

Hirose’s patented half tuning fork contacts maintain the required normal force without relying on the connector housing. With our competitor’s conventional products the housing walls support the contact force, which does not provide for long-term reliability.

Prevention of Solder Bridge

Excess solder cavity absorbs excessive solder and avoids solder bridging.

Three different assembly types

FH12 is offered in Top & Bottom Contact and Vertical Mount and offered in both a 0.5mm contact pitch as well as a 1.0mm contact pitch bottom contact only .
sApplications

Notebook computers, printers, PDAs, digital cameras and other compact devices for interconnecting the main circuit board with the LCD, HDD or other device.

Rotating One-touch Mechanism q
sProduct Specifications

Rating

Current rating 0.4A DC Operating Temperature Range:_40 to +70ç Note 1 Storage Temperature Range:_10 to +50ç Note 2

Voltage rating 50V AC Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range:Relative humidity, 90% max.

Not dewed

Not dewed

Applicable FPC
t=0.3±0.05 Solder plating Note 3 t=0.18 ± for FH12F-*S-0.5SH

Item Insulation resistance Withstanding voltage Contact resistance

Specification 500M ohms minimum No flashover or insulation breakdown. 50m ohms maximum
100V DC 150V AC/1 minute 1mA

Conditions

Durability Insertion/withdrawal

Contact resistance 50m ohms maximum No damage, cracks, or parts dislocation.
20 cycles

Vibration

No electrical discontinuity of 1µs or more Contact resistance 50m ohms maximum. No damage, cracks, or parts dislocation.

Frequency 10 to 55 Hz, single amplitude of mm, 2 hours in each of the 3 directions.

Shock

No electrical discontinuity of 1µs or more Contact resistance 50m ohms maximum. No damage, cracks, or parts dislocation.

Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis.
sOrdering Information

FH12 A - 10 4 - S A - SH 05
q Series Name FH12
t Contact alignment Single
w Blank standard type
y Eccentric direction:

A Top contact type

Blank standard type

S Type with strengthed lock lever

A Eccentric type

F Type with 0.18mm FPC End Thickness
u Contacts Pitch 0.5mm, 1mm
e Standard type Number of contacts
i Contact type

Eccentric type Number of contacts in 0.5mm housing SH SMT horizontal mounting type
r Standard type Blank

SV SMT vertical mounting type

Eccentric type Number of contacts
o Plating specification

No symbol Solder plating

Gold plating

BSeries Configuration

Pitch

Bottom Contact Type

Top Contact Type

Vertical mounting Type

FH12- ** S-0.5SH

P.12

Number of contacts 6, 10, 11, 12, 13, 14,
0.5mm
15, 16, 17, 18, 19, 20, 22, 24, 25, 26, 28, 30,
32, 33, 34, 36, 40, 45,
50, 53

Type with Strengthened Lock Lever

FPC conductive surface

FPC conductive surface bottom side

FH12S- ** S-0.5SH P.13

Number of contacts 30, 40, 45, 50, 53

Type with 0.18mm FPC End Thickness

FH12F- ** S-0.5SH P.14

Number of contacts 6, 10, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 28, 30, 32, 33 , 34, 36, 40

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FH12-50S-0.5SH Datasheet file may be downloaded here without warranties.

Datasheet ID: FH12-50S-0.5SH 636134