AT-908(40)

AT-908(40) Datasheet

AT-900 Series

Part	Datasheet
AT-908(40)	AT-908(40) (pdf)

Related Parts	Information
AT-906(40)	AT-906(40)
AT-905(40)	AT-905(40)
AT-904(40)	AT-904(40)
AT-903(40)	AT-903(40)
AT-901(40)	AT-901(40)
AT-913(40)	AT-913(40)
AT-900-(0)(40)	AT-900-(0)(40)
AT-902(40)	AT-902(40)
AT-909(40)	AT-909(40)
AT-910(40)	AT-910(40)
AT-920(40)	AT-920(40)
AT-907(40)	AT-907(40)

PDF Datasheet Preview
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. Stripline Mounting Fixed Attenuators DC to 8 GHz AT-900 Series sFeatures 1.Frequency Range from DC to 8 GHz Although these attenuators are of the surface mount type, they offer superior high frequency characteristics from DC to 8 GHz. 2.Abundant Variations of Attenuators Attenuation amounts are available in 11 types from 0 to 10 dB in 1 dB steps. AT-900 40 Type sProduct Specifications Ratings Frequency Range Note Characteristic impedance Maximum Input Power Note DC to GHz 50 ohms 1W Operating temperature range Operating relative humidity Note The frequency range and the maximum input power will differ depending on the products. to +65ç 95% Max. Item Standard Conditions 1.Vibration 2.Shock No electrical discontinuity of 1 µs or more No damage, cracks, or parts dislocation Frequency of 10 to 2000 Hz, overall amplitude of mm, acceleration of 98 m/s2 for 2 hours in each of 3 directions Acceleration of 490 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis 3.Temperature cycle No damage, cracks, or parts dislocation qThe test method conforms to MIL-STD-202. Temperature -55ç +15ç to +35ç +85ç +15ç to +35ç Time 30 15 max. 30 15 max. Minutes 5 cycles sMaterials Part Connector Body Attenuation element Tabs Material Brass Metal film Copper Finish Nickel plating ---------Solder plating sOrdering Information AT --- 9 01 40 1 AT Indicates a fixed attenuator 3 Attenuation 2 Indicates the Series Name AT-900 Series 00- 0 0dB Through 1.5dB 4 40 RoHS Compliant 04/208099 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHAS pTr-o9du0c0tsSheavreiebeseqn dSistcroinptilniuneed, oMr owiull t hDe Cprotdouc8tsGstaHtuzs on the Hirose website RoHS search at or contact your Hirose sales representative. sSpecifications Model No. AT-900- 0 40 AT-901 40 AT-902 40 AT-903 40 AT-904 40 AT-905 40 AT-906 40 AT-907 40 AT-908 40 AT-909 40 AT-910 40 Attenuation dB DC~4GHz 4~8GHz V.S.W.R. Max DC~8GHz Power W Surface Temperature at Maximum Load ç Max +85 +85 +85 +85 +85 +85 +85 +85 +85 +85 +85 Weight g sExternal Dimensions AT-900 Type 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the HAirTos-e9w0e0bsSiteerRioeHsS oArtctoenntauctaytoourrsHi roDsCe satloes8reGprHeszen tative. sTypical Data AT-901 40 V.S.W.R. AT-903 40 AT-906 40 V.S.W.R. V.S.W.R. AT-910 40 V.S.W.R. sMounting Method AT-900 40 Type qMake the AT-900 40 tab height from the housing and the thickness of the microstrip board the same amount. qThe tabs are attached with high temperature solder having a melting point of The soldering temperature to the microstrip board must be less than this. 04/209091

PDF Datasheet Preview

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative.

Stripline Mounting Fixed Attenuators DC to 8 GHz

AT-900 Series
sFeatures
1.Frequency Range from DC to 8 GHz

Although these attenuators are of the surface mount type, they offer superior high frequency characteristics from DC to 8 GHz.
2.Abundant Variations of Attenuators

Attenuation amounts are available in 11 types from 0 to 10 dB in 1 dB steps.

AT-900 40 Type
sProduct Specifications

Ratings

Frequency Range Note Characteristic impedance Maximum Input Power Note

DC to GHz 50 ohms 1W

Operating temperature range Operating relative humidity

Note The frequency range and the maximum input power will differ depending on the products.
to +65ç 95% Max.

Item

Standard

Conditions
1.Vibration 2.Shock

No electrical discontinuity of 1 µs or more No damage, cracks, or parts dislocation

Frequency of 10 to 2000 Hz, overall amplitude of mm, acceleration of 98 m/s2 for 2 hours in each of 3 directions

Acceleration of 490 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis
3.Temperature cycle No damage, cracks, or parts dislocation qThe test method conforms to MIL-STD-202.

Temperature -55ç +15ç to +35ç +85ç +15ç to +35ç Time 30 15 max. 30 15 max. Minutes 5 cycles
sMaterials

Part Connector Body Attenuation element

Tabs

Material Brass Metal film Copper

Finish Nickel plating
---------Solder plating
sOrdering Information

AT --- 9 01 40
1 AT Indicates a fixed attenuator
3 Attenuation
2 Indicates the Series Name AT-900 Series 00- 0 0dB Through
1.5dB
4 40 RoHS Compliant
04/208099

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHAS pTr-o9du0c0tsSheavreiebeseqn dSistcroinptilniuneed, oMr owiull t hDe Cprotdouc8tsGstaHtuzs on the Hirose website RoHS search at or contact your Hirose sales representative.
sSpecifications

Model No.

AT-900- 0 40 AT-901 40 AT-902 40 AT-903 40 AT-904 40 AT-905 40 AT-906 40 AT-907 40 AT-908 40 AT-909 40 AT-910 40

Attenuation dB

DC~4GHz
4~8GHz

V.S.W.R. Max

DC~8GHz

Power W

Surface Temperature at Maximum Load ç Max +85 +85 +85 +85 +85 +85 +85 +85 +85 +85 +85

Weight g
sExternal Dimensions

AT-900 Type
04/2009

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the HAirTos-e9w0e0bsSiteerRioeHsS oArtctoenntauctaytoourrsHi roDsCe satloes8reGprHeszen tative.
sTypical Data

AT-901 40

V.S.W.R.

AT-903 40 AT-906 40

V.S.W.R. V.S.W.R.

AT-910 40

V.S.W.R.
sMounting Method

AT-900 40 Type
qMake the AT-900 40 tab height from the housing and the thickness of the microstrip board the same amount. qThe tabs are attached with high temperature solder having a melting point of The soldering temperature to the
microstrip board must be less than this.
04/209091

More datasheets: A3E-44PA-2DSA(81) | DCM27W2P | AT-906(40) | AT-905(40) | AT-904(40) | AT-903(40) | AT-901(40) | AT-913(40) | AT-900-(0)(40) | AT-902(40)

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT-908(40) Datasheet file may be downloaded here without warranties.

Datasheet ID: AT-908(40) 636084