76HPSB10GWR

76HPSB10GWR Datasheet

SERIES 76HP

Part	Datasheet
76HPSB10GWR	76HPSB10GWR (pdf)

Related Parts	Information
76HPSB02GWR	76HPSB02GWR
76HPSB04GWR	76HPSB04GWR
76HPSB06GWR	76HPSB06GWR
76HPSB08GWR	76HPSB08GWR

PDF Datasheet Preview
Surface Mount DIP Switches DIP Switches SERIES 76HP Side Actuated DIMENSIONS In inches and millimeters ± 7,75 ± 0,25 LENGTH ± 0,25 SEE ORDER INFO ± CL 2,54 ± 0,13 TYP. FEATURES • Compatible with SMT Assembly Including Infrared Reflow and Vapor-Phase • Easily Accessed when PC Boards are Racked • Reliable Spring and Ball Contact ± 5,84 1,40 ± 0,25 REF. ± 9,65 ± 0,25 0,64 R. ± 0,30 ± 0,03 TYP. ± 7,70 ± 0,38 ± 10,77 ± 0,38 TYP. Recommended PC Pad Dimensions 13,46 TYP. 7,11 TYP. 1,78 TYP. 2,54 TYP. CL CIRCUITRY As viewed from the top of the switch in the positions shown in the drawing. SPECIFICATIONS Electrical Ratings Make-and-break Current Rating 10,000 operations per switch position at 1 mA, 5 Vdc 50 mA, 30 Vdc or 150 mA, 30 Vdc Contact Resistance Initial 30 mohms maximum After Life 100 mohms maximum 10 mA at 50 Vdc, open circuit Insulation Resistance Minimum, at 100 Vdc between adjacent closed contacts and also across open switch contacts. Initial 2,000 Mohms Dielectric Strength Minimum voltage AC RMS measured between adjacent closed contacts and also across open switch contacts. Initial 750 volts After Life 500 volts Carry Rating 5 amps, maximum rise of 20°C Switch Capacitance 2 pF at 1 megahertz Mechanical Ratings Mechanical Life 20,000 operations per switch position Vibration Resistance Per Method 204, Test Condition B. 1 mS opening 10 mS allowed Mechanical Shock Per Method 213, Test Condition A. 1 mS opening 10 mS allowed Thermal Shock Resistance Per specification no failures passes contact resistance Terminal Strength Per specification Thermal Aging 1,000 hours at 85°C no failures Environmental Ratings Meets all requirements of MIL- S-83504. Where Grayhill performance is superior, the MIL spec is listed in parentheses. Operating Temperature Range -40°C to + 85°C Storage Temperature Range -55°C to + 85°C Moisture Resistance Per specification, Method 106 Soldering Information Solderability Per MIL-STD-202, Method 208 Tested to EIA Standard RS-448-2. Resistance to Soldering Heat Per MIL-S83504, six second test Recommended Processing Temperature 1 maximum Processing Position Switch is to be processed with all actuators in the closed on position as shipped. Materials and Finishes Shorting Member Brass, gold-plated over nickel barrier. Base Contacts Copper alloy, gold-plated, 76HPSB 08GW XXXX OPEN 76HPSB 08GW XXXX OPEN 76HPSB 08GW XXXX OPEN over nickel barrier. Terminals Copper alloy, solder plated over nickel barrier. Non-Conductive Parts Cover is natural color thermoplastic, actuators are white thermoplastic UL94V-O Tape Seal Provided without tape seal. Contact Grayhill if tape seal is required. TAPE AND REEL PACKAGING Meets requirements of EIA 481-2 or EIA 481-3 13 INCH DIAMETER REEL ORDERING INFORMATION Tape and Reel Packaging 500 switches per reel No. of Positions* Length inches Length metric Carrier Width Dim. A 7,1 mm 24 mm 76HPSB02GWR 12,2 mm 24 mm 76HPSB04GWR 17,3 mm 32 mm 76HPSB06GWR 22,4 mm 44 mm 76HPSB08GWR 27,4 mm 44 mm 76HPSB10GWR * For other lengths, contact Grayhill, Inc. Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill. 16mm PIN ONE LOCATION 32, 44 & 56mm TAPE COVER TAPE DIM. A SEE ORDER INFO. Each reel has a inch 390 mm minimum leader and a inch 160 mm minimum trailer. XXXX Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone 708-354-1040 • Fax 708-354-2820 •

PDF Datasheet Preview

Surface Mount DIP Switches

DIP Switches

SERIES 76HP

Side Actuated

DIMENSIONS In inches and millimeters
± 7,75 ± 0,25

LENGTH ± 0,25 SEE ORDER INFO
± CL 2,54 ± 0,13 TYP.

FEATURES
• Compatible with SMT Assembly

Including Infrared Reflow and Vapor-Phase
• Easily Accessed when PC Boards are Racked
• Reliable Spring and Ball Contact
± 5,84 1,40 ± 0,25 REF.
± 9,65 ± 0,25
0,64 R.
± 0,30 ± 0,03

TYP.
± 7,70 ± 0,38
± 10,77 ± 0,38 TYP.

Recommended PC Pad Dimensions
13,46 TYP.
7,11 TYP.
1,78 TYP.
2,54 TYP. CL

CIRCUITRY

As viewed from the top of the switch in the positions shown in the drawing.

SPECIFICATIONS Electrical Ratings

Make-and-break Current Rating 10,000 operations per switch position at 1 mA, 5 Vdc 50 mA, 30 Vdc or 150 mA, 30 Vdc Contact Resistance Initial 30 mohms maximum After Life 100 mohms maximum 10 mA at 50 Vdc, open circuit Insulation Resistance Minimum, at 100 Vdc between adjacent closed contacts and also across open switch contacts. Initial 2,000 Mohms Dielectric Strength Minimum voltage AC RMS measured between adjacent closed contacts and also across open switch contacts. Initial 750 volts After Life 500 volts Carry Rating 5 amps, maximum rise of 20°C Switch Capacitance 2 pF at 1 megahertz

Mechanical Ratings Mechanical Life 20,000 operations per switch position Vibration Resistance Per Method 204, Test Condition B. 1 mS opening 10 mS allowed

Mechanical Shock Per Method 213, Test Condition A. 1 mS opening 10 mS allowed Thermal Shock Resistance Per specification no failures passes contact resistance Terminal Strength Per specification Thermal Aging 1,000 hours at 85°C no failures

Environmental Ratings Meets all requirements of MIL- S-83504. Where Grayhill performance is superior, the MIL spec is listed in parentheses. Operating Temperature Range -40°C to + 85°C Storage Temperature Range -55°C to + 85°C Moisture Resistance Per specification, Method 106

Soldering Information Solderability Per MIL-STD-202, Method 208 Tested to EIA Standard RS-448-2. Resistance to Soldering Heat Per MIL-S83504, six second test Recommended Processing Temperature 1 maximum Processing Position Switch is to be processed with all actuators in the closed on position as shipped.

Materials and Finishes Shorting Member Brass, gold-plated over nickel barrier. Base Contacts Copper alloy, gold-plated,
76HPSB 08GW

XXXX OPEN
76HPSB 08GW

XXXX OPEN
76HPSB 08GW

XXXX OPEN
over nickel barrier. Terminals Copper alloy, solder plated over nickel barrier. Non-Conductive Parts Cover is natural color thermoplastic, actuators are white thermoplastic UL94V-O Tape Seal Provided without tape seal. Contact Grayhill if tape seal is required.

TAPE AND REEL PACKAGING

Meets requirements of EIA 481-2 or EIA 481-3
13 INCH DIAMETER REEL
ORDERING INFORMATION Tape and Reel Packaging 500 switches per reel

No. of Positions*

Length inches

Length metric

Carrier Width Dim. A
7,1 mm
24 mm
76HPSB02GWR
12,2 mm
24 mm
76HPSB04GWR
17,3 mm
32 mm
76HPSB06GWR
22,4 mm
44 mm
76HPSB08GWR
27,4 mm
44 mm
76HPSB10GWR
* For other lengths, contact Grayhill, Inc.

Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill.
16mm PIN ONE LOCATION
32, 44 & 56mm TAPE

COVER TAPE

DIM. A SEE ORDER INFO.

Each reel has a inch 390 mm minimum leader and a inch 160 mm minimum trailer.

XXXX

Grayhill, Inc.
• 561 Hillgrove Avenue
• LaGrange, Illinois 60525-5997
• USA
• Phone 708-354-1040
• Fax 708-354-2820
•

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 76HPSB10GWR Datasheet file may be downloaded here without warranties.

Datasheet ID: 76HPSB10GWR 635877