61S64-2

61S64-2 Datasheet

SERIES 61S

Part	Datasheet
61S64-2	61S64-2 (pdf)

Related Parts	Information
61S100-2	61S100-2
61S64-1-060	61S64-1-060
61SS64-2	61SS64-2
61S128-2-060	61S128-2-060
61S128-2	61S128-2
61S75-2-060	61S75-2-060
61S100-2-020	61S100-2-020

PDF Datasheet Preview
Optical Encoders SERIES 61S High Resolution, 5/8" Package FEATURES • Compact, 5/8" Package • or Shaft Diameter • 10 Million Rotational Cycles • Compatible with CMOS, TTL and HCMOS Logic • Available in 50, 64, 75, 100 and 128 Terminations • Drop-In Industry Replacement APPLICATIONS • Audio Mixing Consoles • Medical Equipment • TestandMeasurementEquipment DIMENSIONS In inches and millimeters Pin Version Shaft Optical and Mechanical Encoders Cable Version Shaft Pin Version Shaft Cable Version Shaft I-35 Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone 708-354-1040 • Fax 708-354-2820 • CIRCUITRY AND WAVEFORM Standard Quadrature 2-Bit Code Optical Encoders Optical and Mechanical Encoders SPECIFICATIONS Electrical Ratings ORDERING INFORMATION Rotational Torque in. oz. max. Terminal Strength 5 lbs terminal pull-out force minimum pinned version Environmental Ratings OperatingTemperatureRange -40°Cto85°C Storage Temperature Range -55°C to 100°C Relative Humidity 90-95% at 40°C for 96 hours Vibration Resistance Harmonic motion with amplitude of 15g, within a varied 10 to 2000 Hz frequency for 12 hours per MIL-STD-202, Method 204 Mechanical Shock Test 1 100g for 6 mS, halfsine wave with velocity change of ft/s. Test 2 100g for 6 mS, sawtooth wave with velocity change of ft/s. Materials and Finishes Bushing Zinc plated brass Housing Nylon Hiloy 610B Shaft Stainless steel Code Rotor Chemically etched stainless steel/ electroformed nickel Printed Circuit Board NEMA Grade FR-4. Five microinches minimum gold over 100 microinches minimum nickel over copper Backplate Nylon Hiloy 610B Header Phosphor bronze, 200 microinches tin over 50 microinches nickel pinned version Retaining Ring and Thrust Washers Stainless steel Photo Sensor Planar silicon Infrared Emitter Gallium aluminum arsenide Cable 26 AWG, stranded/tinned wire, PVC coated on 2,54 centers cabled version Connector Housing glass-filled polyester 94V-0 , black Terminals 15 microinches gold in select area over 50 microinches minimum 61S128-2-025 Termination Blank no dash or numbers pins as described in drawing. Cable Termination 020 = minimum to 250 = 25" maximum. Provided in increments of Example 035 = 060 = Cable is terminated with standard Molex part no. Use any standard center 5-pin header to interface with cable. Shaft/Bushing 1 = shaft and bushing 2 = shaft and bushing Available from your local Grayhill Component Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor, or Grayhill. ACCESSORIES Non-turn Washers The Series 61S bushing has a non-turn keyway to prevent rotation of the switch body when the panel is cut to fit. Another way to keep the switch from turning is to use a nonturn washer. Part Number 50J1066 302-2B stainless steel Part number 12C1087-1 cadium-plated DIMENSIONS In inches and millimeters Part Number SHH694-11 302-2B stainless steel, no plating Shaft and Panel Seal For shaft and panel seal version, the shaft is sealed by an o-ring inside the bushing. The panel is sealed by a flat gasket thick at the base of the bushing. The panel seals will increase the behind panel dimension by to when the switch is mounted. The panel seal is silicon rubber. The shaft seal is an o-ring per OPTIONS Contact Grayhill for custom terminations, shaft and bushing configurations, and resolutions. Control knobs are also available. Part Number 50J1066 shaft Part Number SHH694-11 shaft Part Number 12C1087-1 shaft Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone 708-354-1040 • Fax 708-354-2820 • I-36

PDF Datasheet Preview

Optical Encoders

SERIES 61S

High Resolution, 5/8" Package

FEATURES
• Compact, 5/8" Package
• or Shaft Diameter
• 10 Million Rotational Cycles
• Compatible with CMOS, TTL and

HCMOS Logic
• Available in 50, 64, 75, 100 and 128

Terminations
• Drop-In Industry Replacement

APPLICATIONS
• Audio Mixing Consoles
• Medical Equipment
• TestandMeasurementEquipment

DIMENSIONS In inches and millimeters

Pin Version Shaft

Optical and Mechanical Encoders

Cable Version Shaft Pin Version Shaft

Cable Version Shaft

I-35

Grayhill, Inc.
• 561 Hillgrove Avenue
• LaGrange, Illinois 60525-5997
• USA
• Phone 708-354-1040
• Fax 708-354-2820
•

CIRCUITRY AND WAVEFORM Standard Quadrature 2-Bit Code

Optical Encoders

Optical and Mechanical Encoders

SPECIFICATIONS Electrical Ratings
ORDERING INFORMATION

Rotational Torque in. oz. max. Terminal Strength 5 lbs terminal pull-out force minimum pinned version Environmental Ratings OperatingTemperatureRange -40°Cto85°C Storage Temperature Range -55°C to 100°C Relative Humidity 90-95% at 40°C for 96 hours Vibration Resistance Harmonic motion with amplitude of 15g, within a varied 10 to 2000 Hz frequency for 12 hours per MIL-STD-202, Method 204 Mechanical Shock Test 1 100g for 6 mS, halfsine wave with velocity change of ft/s. Test 2 100g for 6 mS, sawtooth wave with velocity change of ft/s. Materials and Finishes Bushing Zinc plated brass Housing Nylon Hiloy 610B

Shaft Stainless steel Code Rotor Chemically etched stainless steel/ electroformed nickel Printed Circuit Board NEMA Grade FR-4. Five microinches minimum gold over 100 microinches minimum nickel over copper Backplate Nylon Hiloy 610B Header Phosphor bronze, 200 microinches tin over 50 microinches nickel pinned version Retaining Ring and Thrust Washers Stainless steel Photo Sensor Planar silicon Infrared Emitter Gallium aluminum arsenide Cable 26 AWG, stranded/tinned wire, PVC coated on 2,54 centers cabled version Connector Housing glass-filled polyester 94V-0 , black Terminals 15 microinches gold in select area over 50 microinches minimum
61S128-2-025

Termination Blank no dash or numbers pins as described in drawing. Cable Termination 020 = minimum to 250 = 25" maximum. Provided in increments of Example 035 = 060 = Cable is terminated with standard Molex part no. Use any standard center 5-pin header to interface with cable. Shaft/Bushing 1 = shaft and bushing 2 = shaft and bushing

Available from your local Grayhill Component Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor, or Grayhill.

ACCESSORIES Non-turn Washers

The Series 61S bushing has a non-turn keyway to prevent rotation of the switch body when the panel is cut to fit. Another way to keep the switch from turning is to use a nonturn washer. Part Number 50J1066 302-2B stainless steel Part number 12C1087-1 cadium-plated

DIMENSIONS In inches and millimeters

Part Number SHH694-11 302-2B stainless steel, no plating

Shaft and Panel Seal

For shaft and panel seal version, the shaft is sealed by an o-ring inside the bushing. The panel is sealed by a flat gasket thick at the base of the bushing. The panel seals will increase the behind panel dimension by
to when the switch is mounted. The panel seal is silicon rubber. The shaft seal is an o-ring per

OPTIONS

Contact Grayhill for custom terminations, shaft and bushing configurations, and resolutions. Control knobs are also available.

Part Number 50J1066 shaft

Part Number SHH694-11 shaft

Part Number 12C1087-1 shaft

Grayhill, Inc.
• 561 Hillgrove Avenue
• LaGrange, Illinois 60525-5997
• USA
• Phone 708-354-1040
• Fax 708-354-2820
•

I-36

More datasheets: IDT71016S12PHGI | TPG100006 | ICE5LP4K-MDP-EVN | S0KMOD0001 | 61S100-2 | 61S64-1-060 | 61SS64-2 | 61S128-2-060 | 61S128-2 | 61S75-2-060

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 61S64-2 Datasheet file may be downloaded here without warranties.

Datasheet ID: 61S64-2 635867