KW025A0P41-SRZ

KW025A0P41-SRZ Datasheet

KW010/015/020/025 Series Power Modules

Part	Datasheet
KW025A0P41-SRZ	KW025A0P41-SRZ (pdf)

Related Parts	Information
KW025A0P41Z	KW025A0P41Z
KW010A0A41Z	KW010A0A41Z

PDF Datasheet Preview
Data Sheet KW010/015/020/025 Series Power Modules 36 75Vdc Input to 5.0Vdc Output 10 to 25A Output current • Compliant to RoHS EU Directive 2011/65/EU Z versions • Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this produc twill no longer be RoHS compliant non-Z versions Representative Photo, actual product may vary. • Delivers up to 25A output current 5V 10A , 3.3V 15A , 2.5V 20A , 1.8V-1.2V 25A • High efficiency 91% at 3.3V full load • Distributed power architectures • Wireless networks • Access and optical network Equipment • Enterprise Networks • Latest generation IC’s DSP, FPGA, ASIC and Microprocessor powered applications • Small size and low profile mm x mm x mm in x in x in Options • Negative Remote On/Off logic • Surface Mount Tape and Reel, -SR Suffix • Over current/Over temperature/Over voltage protections auto-restart • Shorter lead trim • Over temperature protection latching • Output overcurrent/overvoltage protection latching • Wide operating temperature range -40°C to 85°C • Meets the voltage isolation requirements for ETSI 300-132-2 and complies with and is licensed for Basic Insulation rating per EN60950-1 • UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805 IEC60950 3rd Edition Licensed • CE mark meets 2006/95/EC directive§ • ISO** 9001 and ISO 14001 certified manufacturing facilities The KW Sixteenth-brick series power modules are isolated dc-dc converters that operate over a wide input voltage range of 36 to 75Vdc and provide a single precisely regulated output. The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency, typical efficiency of 91% for 3.3V/15A. These open frame modules are available either in surface-mount -SR or in through-hole TH form. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. § This product is intended for integration into end-use equipment. All of the required procedures of end-use equipment should be followed ** ISO is a registered trademark of the International Organization of Standards October 5, 2015 2012 General Electric Company. All rights reserved. Data Sheet KW010/015/020/025 Series Power Modules 36 75Vdc Input to 5.0Vdc Output 10 to 25A Output current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Continuous Transient 100 ms Operating Ambient Temperature see Thermal Considerations section Storage Temperature I/O Isolation voltage 100% Factory Hi-Pot tested Device Unit VIN,trans Tstg 1500 Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Code Product Codes KW010A0A41-SR KW015A0F41-SR KW015A0F41 KW025A0Y41 KW010A0A41-SRZ KW010A0A41Z KW015A0F41-SRZ KW015A0F41Z KW015A0F841Z KW020A0G4-SRZ KW020A0G41-SRZ KW020A0G41Z KW020A0G41-BZ KW025A0Y41-SRZ KW025A0Y41Z KW025A0Y641Z KW025A0M41Z KW025A0P41-SRZ KW025A0P41Z Input Voltage 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc Output Voltage 5.0V 3.3V 3.3V 1.8V 5.0V 5.0V 3.3V 3.3V 3.3V 2.5V 2.5V 2.5V 2.5V 1.8V 1.8V 1.8V 1.5V 1.2V 1.2V Output Current 10A 15A 25A 10A 15A 20A 25A On/Off Logic Negative Positive Negative Connector Type Surface mount Surface mount Through hole Through hole Surface mount Through hole Surface mount Through hole Through hole Surface mount Surface mount Through hole Through hole Surface mount Through hole Through hole Through hole Surface mount Through hole Comcode 108992434 108989934 108992590 108989942 CC109112042 CC109112050 CC109105888 CC109112067 CC109144696 CC109112653 CC109128212 CC109141710 CC109108395 CC109112091 CC109112100 CC109127445 CC109128492 CC109123964 CC109128385 -Z Indicated RoHS Compliant Modules Table Device Options Option* Negative remote on/off logic Auto Re-start for Over Current / Over voltage Protections Pin Length mm ± mm, in. ± in. Pin Length mm ± mm, in. ± in. Surface mount connections Tape & Reel Suffix** 1 4 6 8 -SR * Legacy device codes may contain a option suffix to indicate 100% factory Hi-Pot tested to the isolation voltage specified in the Absolute Maximum Ratings table. The 100% Hi-Pot test is now applied to all device codes, with or without the option suffix. Existing comcodes for devices with the suffix are still valid however, no new comcodes for devices containing the suffix will be created. Contact Us For more information, call us at USA/Canada +1 877 546 3243, or +1 972 244 9288 Asia-Pacific: Europe, Middle-East and Africa: GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information. October 5, 2015 2012 General Electric Company. All International rights reserved. Version

PDF Datasheet Preview

Data Sheet

KW010/015/020/025 Series Power Modules
36 75Vdc Input to 5.0Vdc Output 10 to 25A Output current
• Compliant to RoHS EU Directive 2011/65/EU Z versions
• Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this produc twill no longer be RoHS compliant non-Z versions

Representative Photo, actual product may vary.
• Delivers up to 25A output current 5V 10A , 3.3V 15A , 2.5V 20A , 1.8V-1.2V 25A
• High efficiency 91% at 3.3V full load
• Distributed power architectures
• Wireless networks
• Access and optical network Equipment
• Enterprise Networks
• Latest generation IC’s DSP, FPGA, ASIC and

Microprocessor powered applications
• Small size and low profile mm x mm x mm in x in x in

Options
• Negative Remote On/Off logic
• Surface Mount Tape and Reel, -SR Suffix
• Over current/Over temperature/Over voltage
protections auto-restart
• Shorter lead trim
• Over temperature protection latching
• Output overcurrent/overvoltage protection latching
• Wide operating temperature range -40°C to 85°C
• Meets the voltage isolation requirements for ETSI 300-132-2 and complies with and is licensed for Basic Insulation rating per EN60950-1
• UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805 IEC60950 3rd Edition Licensed
• CE mark meets 2006/95/EC directive§
• ISO** 9001 and ISO 14001 certified manufacturing facilities

The KW Sixteenth-brick series power modules are isolated dc-dc converters that operate over a wide input voltage range of 36 to 75Vdc and provide a single precisely regulated output. The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency, typical efficiency of 91%
for 3.3V/15A. These open frame modules are available either in surface-mount -SR or in through-hole TH form.
* UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. § This product is intended for integration into end-use equipment. All of the required procedures of end-use equipment should be followed ** ISO is a registered trademark of the International Organization of Standards

October 5, 2015
2012 General Electric Company. All rights reserved.

Data Sheet

KW010/015/020/025 Series Power Modules
36 75Vdc Input to 5.0Vdc Output 10 to 25A Output current

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.

Parameter Input Voltage

Continuous Transient 100 ms Operating Ambient Temperature see Thermal Considerations section

Storage Temperature I/O Isolation voltage 100% Factory Hi-Pot tested

Device

Unit

VIN,trans

Tstg
1500

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.
Ordering Information

Please contact your GE Sales Representative for pricing, availability and optional features.

Table Device Code

Product Codes

KW010A0A41-SR KW015A0F41-SR KW015A0F41 KW025A0Y41 KW010A0A41-SRZ KW010A0A41Z KW015A0F41-SRZ KW015A0F41Z KW015A0F841Z KW020A0G4-SRZ KW020A0G41-SRZ KW020A0G41Z KW020A0G41-BZ KW025A0Y41-SRZ KW025A0Y41Z KW025A0Y641Z KW025A0M41Z KW025A0P41-SRZ KW025A0P41Z

Input Voltage
48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc 48V 36-75Vdc

Output Voltage
5.0V 3.3V 3.3V 1.8V 5.0V 5.0V 3.3V 3.3V 3.3V 2.5V 2.5V 2.5V 2.5V 1.8V 1.8V 1.8V 1.5V 1.2V 1.2V

Output Current
10A 15A 25A 10A 15A 20A 25A

On/Off Logic

Negative Positive Negative

Connector Type

Surface mount Surface mount Through hole Through hole Surface mount Through hole Surface mount Through hole Through hole Surface mount Surface mount Through hole Through hole Surface mount Through hole Through hole Through hole Surface mount Through hole

Comcode
108992434 108989934 108992590 108989942 CC109112042 CC109112050 CC109105888 CC109112067 CC109144696 CC109112653 CC109128212 CC109141710 CC109108395 CC109112091 CC109112100 CC109127445 CC109128492 CC109123964 CC109128385
-Z Indicated RoHS Compliant Modules Table Device Options

Option* Negative remote on/off logic Auto Re-start for Over Current / Over voltage Protections Pin Length mm ± mm, in. ± in. Pin Length mm ± mm, in. ± in. Surface mount connections Tape & Reel

Suffix** 1 4 6 8 -SR
* Legacy device codes may contain a option suffix to indicate 100% factory Hi-Pot tested to the isolation voltage specified in the Absolute Maximum Ratings table. The 100% Hi-Pot test is now applied to all device codes, with or without the option suffix. Existing comcodes for devices with the suffix are still valid however, no new comcodes for devices containing the suffix will be created.

Contact Us

For more information, call us at

USA/Canada +1 877 546 3243, or +1 972 244 9288

Asia-Pacific:

Europe, Middle-East and Africa:

GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information.

October 5, 2015
2012 General Electric Company. All International rights reserved.

Version

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived KW025A0P41-SRZ Datasheet file may be downloaded here without warranties.

Datasheet ID: KW025A0P41-SRZ 645701