JC030A1-M

JC030A1-M Datasheet

JC030-Series Power Modules 18 Vdc to 36 Vdc Inputs 2 Vdc to 15 Vdc Outputs;13 W to 30 W

Part	Datasheet
JC030A1-M	JC030A1-M (pdf)

Related Parts	Information
JC030A-M	JC030A-M
JC030C-M	JC030C-M
LW030A87	LW030A87
JC030B-M	JC030B-M
LW030A1	LW030A1

PDF Datasheet Preview
Data Sheet March 26, 2008 JC030-Series Power Modules 18 Vdc to 36 Vdc Inputs 2 Vdc to 15 Vdc Outputs;13 W to 30 W The JC030-Series Power Modules use advanced, surfacemount technology and deliver high-quality, compact, dc-dc conversion at an economical price. n Distributed power architectures n Telecommunication equipment Options n Choice of remote on/off configurations n Short pins mm ± mm in. ± in. n Heat sinks available for extended operation n Small size mm x mm x mm in. x in. x in. n Low output noise n Constant frequency n Industry-standard pinout n Metal case n 2:1 input voltage range n High efficiency 81% typical n Overcurrent protection n Remote on/off n Remote sense n Adjustable output voltage n Output overvoltage protection n Case ground pin n UL* 1950 Recognized, CSA† C22.2 No. 950-95 Certified, 0805 EN60950, IEC950 Licensed n Within FCC Class A radiated limits * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Associa- tion. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. The JC030-Series Power Modules are dc-dc converters that operate over an input voltage range of 18 Vdc to 36 Vdc and provide precisely regulated 2 V, 5 V, 12 V, and 15 V outputs. The outputs are isolated from the inputs, allowing versatile polarity configurations and grounding connections. The modules have maximum power ratings of 30 W at a typical full-load efficiency of The power modules feature remote on/off, output sense both negative and positive leads , and output voltage adjustment, which allows output voltage adjustment from 60% to 110% 80% to 110% for the JC030A-M and JC030D-M of the nominal output voltage. For disk-drive applications, the JC030B-M Power Module provides a motor-start surge current of 3 A. The modules are PC-board mountable and encapsulated in metal cases. The modules are rated to full load at 100 °C case temperature with no external filtering. JC030-Series Power Modules 18 Vdc to 36 Vdc Inputs 2 Vdc to 15 Vdc Outputs;13 W to 30 W Data Sheet March 26, 2008 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Unit Input Voltage continuous Operating Case Temperature See Thermal Considerations section. Storage Temperature Tstg I/O Isolation Voltage dc Transient 1 min Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Table Input Specifications Parameter Operating Input Voltage Maximum Input Current VI = 0 V to 6 V IO = IO, max. See Figure Inrush Transient Input Reflected-ripple Current, Peak-to-peak 5 Hz to 20 MHz, 12 µH source impedance TC = 25 °C see Figure 19 and Design Considerations section. Input Ripple Rejection 120 Hz Unit II, max mAp-p Fusing Considerations CAUTION This power module is not internally fused. An input line fuse must always be used. This encapsulated power module can be used in a wide variety of applications, ranging from simple stand-alone operation to an integrated part of a sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a normal-blow fuse with a maximum rating of 5 A see Safety Considerations section . Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data for further information. Lineage Power Data Sheet March 26, 2008 JC030-Series Power Modules 18 Vdc to 36 Vdc Inputs 2 Vdc to 15 Vdc Outputs;13 W to 30 W Ordering Information Table Device Codes Input Voltage 24 V 24 V 24 V 24 V Output Voltage 2V 5V 12 V 15 V Output Power 13 W 30 W 30 W 30 W Device Code JC030D-M JC030A-M JC030B-M JC030C-M 8-716 C .l Comcode 108272170 107587719 107587735 107587768 Optional features may be ordered using the device code suffixes shown below. To order more than one option, list suffixes in numerically descending order followed by the -M suffix indicating metric M3 x heat sink hardware. The heat sinks designed for this package have an M prefix, i.e., MHSTxxx40, see Thermal Management JC- and JW-Series 30 W Board-Mounted Power Modules TN97-016EPS . Please contact your Lineage Power Account Manager or Field Application Engineer for pricing and availability. Table Device Options Option Short pins mm ± mm in. ± in. Negative remote on/off logic Device Code Suffix 8 Lineage Power Data Sheet March 26, 2008 JC030-Series Power Modules 18 Vdc to 36 Vdc Inputs 2 Vdc to 15 Vdc Outputs;13 W to 30 W Ordering Information continued Table Device Accessories Accessory 1/4 in. transverse kit heat sink, thermal pad, and screws 1/4 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws 1 in. transverse kit heat sink, thermal pad, and screws 1 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws Note Dimensions are in millimeters and inches . Comcode 407243989 407243997 407244706 407244714 407244722 407244730 407244748 407244755 1/4 IN. 1/2 IN. 1/4 IN. 1/2 IN. 1 IN. 1 IN. 1/2 IN. 1/2 IN. 8-724 C .a Figure Longitudinal Heat Sink Figure Transverse Heat Sink 8-724 C .b Lineage Power JC030-Series Power Modules 18 Vdc to 36 Vdc Inputs 2 Vdc to 15 Vdc Outputs;13 W to 30 W Data Sheet March 26, 2008 A sia-Pacific Head qu art er s T el +65 6 41 6 4283 World W ide Headq u ar ter s Lin eag e Po wer Co rp oratio n 30 00 Sk yline D riv e, Mes quite, T X 75149, U SA +1-800-526-7819 Outs id e U .S.A +1- 97 2-2 84 -2626 ag ep ower.co m e-m ail tech sup por lin ea gep ower .co m Eu ro pe, M id dle-East an d Afric a He ad qu arters T el +49 8 9 6089 286 Ind ia Head qu arter s T el +91 8 0 28411633 Lineage Power reserves the right to m ake changes to the produc t s or inform ation contained herein without notice. No liability is ass um ed as a res ult of their use or applic ation. No rights under any patent acc om pany the sale of any s uc h pr oduct s or information. 2008 Lineage Power Corpor ation, M esquite, Texas All International Rights Res er ved. March 2008 DS99-123EPS Replaces DS99-122EPS

PDF Datasheet Preview

Data Sheet March 26, 2008

JC030-Series Power Modules 18 Vdc to 36 Vdc Inputs 2 Vdc to 15 Vdc Outputs;13 W to 30 W

The JC030-Series Power Modules use advanced, surfacemount technology and deliver high-quality, compact, dc-dc conversion at an economical price.
n Distributed power architectures n Telecommunication equipment

Options
n Choice of remote on/off configurations n Short pins mm ± mm
in. ± in. n Heat sinks available for extended operation
n Small size mm x mm x mm in. x in. x in.
n Low output noise n Constant frequency n Industry-standard pinout n Metal case n 2:1 input voltage range n High efficiency 81% typical n Overcurrent protection n Remote on/off n Remote sense n Adjustable output voltage n Output overvoltage protection n Case ground pin n UL* 1950 Recognized, CSA† C22.2 No. 950-95

Certified, 0805 EN60950, IEC950 Licensed n Within FCC Class A radiated limits
* UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Associa-
tion. VDE is a trademark of Verband Deutscher Elektrotechniker e.V.

The JC030-Series Power Modules are dc-dc converters that operate over an input voltage range of 18 Vdc to 36 Vdc and provide precisely regulated 2 V, 5 V, 12 V, and 15 V outputs. The outputs are isolated from the inputs, allowing versatile polarity configurations and grounding connections. The modules have maximum power ratings of 30 W at a typical full-load efficiency of

The power modules feature remote on/off, output sense both negative and positive leads , and output voltage adjustment, which allows output voltage adjustment from 60% to 110% 80% to 110% for the JC030A-M and JC030D-M of the nominal output voltage. For disk-drive applications, the JC030B-M Power Module provides a motor-start surge current of 3 A.

The modules are PC-board mountable and encapsulated in metal cases. The modules are rated to full load at 100 °C case temperature with no external filtering.

JC030-Series Power Modules 18 Vdc to 36 Vdc Inputs 2 Vdc to 15 Vdc Outputs;13 W to 30 W

Data Sheet March 26, 2008

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.

Parameter

Unit

Input Voltage continuous

Operating Case Temperature See Thermal Considerations section.

Storage Temperature

Tstg

I/O Isolation Voltage dc Transient 1 min

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Table Input Specifications

Parameter Operating Input Voltage Maximum Input Current

VI = 0 V to 6 V IO = IO, max. See Figure Inrush Transient Input Reflected-ripple Current, Peak-to-peak
5 Hz to 20 MHz, 12 µH source impedance TC = 25 °C see Figure 19 and Design Considerations section. Input Ripple Rejection 120 Hz

Unit

II, max
mAp-p

Fusing Considerations

CAUTION This power module is not internally fused. An input line fuse must always be used.

This encapsulated power module can be used in a wide variety of applications, ranging from simple stand-alone operation to an integrated part of a sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a normal-blow fuse with a maximum rating of 5 A see Safety Considerations section . Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data for further information.

Lineage Power

Data Sheet March 26, 2008

JC030-Series Power Modules 18 Vdc to 36 Vdc Inputs 2 Vdc to 15 Vdc Outputs;13 W to 30 W
Ordering Information

Table Device Codes

Input Voltage
24 V 24 V 24 V 24 V

Output Voltage
2V 5V 12 V 15 V

Output Power 13 W 30 W 30 W 30 W

Device Code JC030D-M JC030A-M JC030B-M JC030C-M
8-716 C .l

Comcode 108272170 107587719 107587735 107587768

Optional features may be ordered using the device code suffixes shown below. To order more than one option, list suffixes in numerically descending order followed by the -M suffix indicating metric M3 x heat sink hardware. The heat sinks designed for this package have an M prefix, i.e., MHSTxxx40, see Thermal Management JC- and JW-Series 30 W Board-Mounted Power Modules TN97-016EPS .

Please contact your Lineage Power Account Manager or Field Application Engineer for pricing and availability.

Table Device Options

Option Short pins mm ± mm
in. ± in. Negative remote on/off logic

Device Code Suffix 8

Lineage Power

Data Sheet March 26, 2008

JC030-Series Power Modules 18 Vdc to 36 Vdc Inputs 2 Vdc to 15 Vdc Outputs;13 W to 30 W
Ordering Information continued

Table Device Accessories

Accessory 1/4 in. transverse kit heat sink, thermal pad, and screws 1/4 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws 1 in. transverse kit heat sink, thermal pad, and screws 1 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws

Note Dimensions are in millimeters and inches .

Comcode
407243989 407243997 407244706 407244714 407244722 407244730 407244748 407244755
1/4 IN. 1/2 IN.
1/4 IN. 1/2 IN.
1 IN.
1 IN.
1/2 IN.
1/2 IN.
8-724 C .a

Figure Longitudinal Heat Sink

Figure Transverse Heat Sink
8-724 C .b

Lineage Power

JC030-Series Power Modules 18 Vdc to 36 Vdc Inputs 2 Vdc to 15 Vdc Outputs;13 W to 30 W

Data Sheet March 26, 2008

A sia-Pacific Head qu art er s T el +65 6 41 6 4283

World W ide Headq u ar ter s Lin eag e Po wer Co rp oratio n 30 00 Sk yline D riv e, Mes quite, T X 75149, U SA +1-800-526-7819 Outs id e U .S.A +1- 97 2-2 84 -2626 ag ep ower.co m e-m ail tech sup por lin ea gep ower .co m

Eu ro pe, M id dle-East an d Afric a He ad qu arters T el +49 8 9 6089 286

Ind ia Head qu arter s T el +91 8 0 28411633

Lineage Power reserves the right to m ake changes to the produc t s or inform ation contained herein without notice. No liability is ass um ed as a res ult of their use or applic ation. No rights under any patent acc om pany the sale of any s uc h pr oduct s or information.
2008 Lineage Power Corpor ation, M esquite, Texas All International Rights Res er ved.

March 2008 DS99-123EPS Replaces DS99-122EPS

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived JC030A1-M Datasheet file may be downloaded here without warranties.

Datasheet ID: JC030A1-M 645673