JBW030A

JBW030A Datasheet

JBW030-Series Power Module dc-dc Converters 36-75 Vdc Input Vdc and 5 Vdc Outputs 30 W

Part	Datasheet
JBW030A	JBW030A (pdf)

Related Parts	Information
JBW030A1	JBW030A1

PDF Datasheet Preview
Data Sheet March 27, 2008 JBW030-Series Power Module dc-dc Converters 36-75 Vdc Input Vdc and 5 Vdc Outputs 30 W The JBW030-Series Power Modules use advanced, surfacemount technology and deliver high-quality, compact, dc-dc conversion at an economical price. n Distributed power architectures n Communications equipment n Workstations / Computer equipment Options n Heat sinks available for extended operation n Choice of remote on/off logic configuration n Short pins mm ± mm in. ± in. n Short pins mm ± mm in. ± in. n Small size mm x mm x mm in. x in. x in. n Low output noise n Constant frequency n Industry-standard pinout n Metal case n Case ground pin n 2:1 input voltage range n Overcurrent protection n Output overvoltage protection n Remote on/off n Remote sense n Adjustable output voltage 80% to 110% of VO, nom n UL* 60950 Recognized, CSA† C22.2 No. 60950- 00 Certified, and EN 60950 VDE0805 :2001-12 Licensed n CE mark meets 73/23/EEC and 93/68/EEC n Within FCC Class A radiated limits The JBW030-Series Power Modules are dc-dc converters that operate over an input voltage range of 36 Vdc to 75 Vdc and provide precisely regulated outputs. The outputs are isolated from the inputs, allowing versatile polarity configurations and grounding connections. The modules have maximum power ratings of up to 30 W at a typical full-load efficiency of up to 82% 5 Vout . These power modules feature remote on/off, remote sense, and output voltage adjustment, 80% to 110% of the nominal output voltage . The modules are PC board-mountable, encapsulated in metal cases, and are rated to full load at 100 °C case temperature. No external filtering is required. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should be followed. The CE mark is placed on selected products. JBW030-Series Power Module dc-dc Converters 36-75 Vdc Input Vdc and 5 Vdc Outputs 30 W Data Sheet March 27, 2008 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Unit Input Voltage Continuous Operating Case Temperature See Thermal Considerations section. Storage Temperature Tstg I/O Isolation Voltage Continuous Transient 1500 Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Table Input Specifications Parameter Operating Input Voltage Maximum Input Current VI = 0 V to 75 V IO = IO, max see Figure Inrush Transient Input Reflected-ripple Current, Peak-to-peak 5 Hz to 20 MHz, 12 µH source impedance TC = 25 °C see Figure 11 and Design Considerations section. Input Ripple Rejection 120 Hz Unit II, max mAp-p Fusing Considerations CAUTION This power module is not internally fused. An input line fuse must always be used. Ordering Information Please contact your Lineage Power Account Manager or Field Application Engineer for pricing and availability. Table Device Codes Input Voltage 48 V 48 V 48 V 48 V Output Voltage Output Power W 30 W 30 W Remote On/ Off Logic Positive Negative Positive Negative Device Code JBW030F JBW030F1 JBW030A JBW030A1 Comcode 108966078 108975418 108966086 108970203 Table Device Options Option Short pins mm ± mm in. ± in. Short pins mm ± mm in. ± in. Negative Logic On/Off Device Code Suffix 6 8 1 Lineage Power JBW030-Series Power Module dc-dc Converters 36-75 Vdc Input Vdc and 5 Vdc Outputs 30 W Ordering Information continued Table Device Accessories Accessory 1/4 in. transverse kit heat sink, thermal pad, and screws 1/4 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws 1 in. transverse kit heat sink, thermal pad, and screws 1 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws Note Dimensions are in millimeters and inches . 1/4 IN. 1/2 IN. 1 IN. 1/2 IN. Data Sheet March 27, 2008 Comcode 407243989 407243997 407244706 407244714 407244722 407244730 407244748 407244755 1/4 IN. 1/2 IN. 1 IN. 1/2 IN. D000-c.cvs Figure Longitudinal Heat Sink Figure Transverse Heat Sink D000-d.cvs A sia-Pacific Head qu art ers T el +65 6 41 6 4283 World W ide Headq u arters Lin eag e Po wer Co rp oratio n 30 00 Sk yline D riv e, Mes quite, T X 75149, U SA +1-800-526-7819 Outs id e U .S.A +1- 97 2-2 84 -2626 ag ep ower.co m e-m ail tech sup lin ea gep ower.co m Eu ro pe, M id dle-East an d Afric a He ad qu arters Tel +49 8 9 6089 286 Ind ia Head qu arters Tel +91 8 0 28411633 Lineage Power reserves the right to make changes to the produc t s or information contained herein without notice. No liability is ass umed as a res ult of their use or applic ation. No rights under any patent acc ompany the sale of any s uc h pr oduct s or information. 2008 Lineage Power Corpor ation, Mesquite, Texas All International Rights Res er ved. March 27, 2008 FDS02-038EPS Replaces FDS02-037EPS

PDF Datasheet Preview

Data Sheet March 27, 2008

JBW030-Series Power Module dc-dc Converters 36-75 Vdc Input Vdc and 5 Vdc Outputs 30 W

The JBW030-Series Power Modules use advanced, surfacemount technology and deliver high-quality, compact, dc-dc conversion at an economical price.
n Distributed power architectures n Communications equipment n Workstations / Computer equipment

Options
n Heat sinks available for extended operation n Choice of remote on/off logic configuration n Short pins mm ± mm
in. ± in. n Short pins mm ± mm
in. ± in.
n Small size mm x mm x mm in. x in. x in.
n Low output noise n Constant frequency n Industry-standard pinout n Metal case n Case ground pin
n 2:1 input voltage range n Overcurrent protection n Output overvoltage protection n Remote on/off n Remote sense n Adjustable output voltage 80% to 110% of VO, nom n UL* 60950 Recognized, CSA† C22.2 No. 60950-
00 Certified, and EN 60950 VDE0805 :2001-12 Licensed
n CE mark meets 73/23/EEC and 93/68/EEC
n Within FCC Class A radiated limits

The JBW030-Series Power Modules are dc-dc converters that operate over an input voltage range of 36 Vdc to 75 Vdc and provide precisely regulated outputs. The outputs are isolated from the inputs, allowing versatile polarity configurations and grounding connections. The modules have maximum power ratings of up to 30 W at a typical full-load efficiency of up to 82% 5 Vout .

These power modules feature remote on/off, remote sense, and output voltage adjustment, 80% to 110% of the nominal output voltage . The modules are PC board-mountable, encapsulated in metal cases, and are rated to full load at 100 °C case temperature. No external filtering is required.
* UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should
be followed. The CE mark is placed on selected products.

JBW030-Series Power Module dc-dc Converters 36-75 Vdc Input Vdc and 5 Vdc Outputs 30 W

Data Sheet March 27, 2008

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.

Parameter

Unit

Input Voltage Continuous

Operating Case Temperature See Thermal Considerations section.

Storage Temperature

Tstg

I/O Isolation Voltage Continuous Transient
1500

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Table Input Specifications

Parameter Operating Input Voltage Maximum Input Current

VI = 0 V to 75 V IO = IO, max see Figure Inrush Transient Input Reflected-ripple Current, Peak-to-peak
5 Hz to 20 MHz, 12 µH source impedance TC = 25 °C see Figure 11 and Design Considerations section. Input Ripple Rejection 120 Hz

Unit

II, max
mAp-p

Fusing Considerations

CAUTION This power module is not internally fused. An input line fuse must always be used.
Ordering Information

Please contact your Lineage Power Account Manager or Field Application Engineer for pricing and availability.

Table Device Codes

Input Voltage
48 V 48 V 48 V 48 V

Output Voltage

Output Power W 30 W 30 W

Remote On/ Off Logic Positive Negative Positive Negative

Device Code JBW030F JBW030F1 JBW030A JBW030A1

Comcode
108966078 108975418 108966086 108970203

Table Device Options

Option Short pins mm ± mm
in. ± in. Short pins mm ± mm
in. ± in. Negative Logic On/Off

Device Code Suffix 6 8 1

Lineage Power

JBW030-Series Power Module dc-dc Converters 36-75 Vdc Input Vdc and 5 Vdc Outputs 30 W
Ordering Information continued

Table Device Accessories Accessory
1/4 in. transverse kit heat sink, thermal pad, and screws 1/4 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws
1 in. transverse kit heat sink, thermal pad, and screws 1 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws

Note Dimensions are in millimeters and inches .
1/4 IN.
1/2 IN.
1 IN.
1/2 IN.

Data Sheet March 27, 2008

Comcode
407243989 407243997 407244706 407244714 407244722 407244730 407244748 407244755
1/4 IN. 1/2 IN.
1 IN.
1/2 IN.

D000-c.cvs

Figure Longitudinal Heat Sink

Figure Transverse Heat Sink

D000-d.cvs

A sia-Pacific Head qu art ers T el +65 6 41 6 4283

World W ide Headq u arters Lin eag e Po wer Co rp oratio n 30 00 Sk yline D riv e, Mes quite, T X 75149, U SA +1-800-526-7819 Outs id e U .S.A +1- 97 2-2 84 -2626 ag ep ower.co m e-m ail tech sup lin ea gep ower.co m

Eu ro pe, M id dle-East an d Afric a He ad qu arters Tel +49 8 9 6089 286

Ind ia Head qu arters Tel +91 8 0 28411633

Lineage Power reserves the right to make changes to the produc t s or information contained herein without notice. No liability is ass umed as a res ult of their use or applic ation. No rights under any patent acc ompany the sale of any s uc h pr oduct s or information.
2008 Lineage Power Corpor ation, Mesquite, Texas All International Rights Res er ved.

March 27, 2008 FDS02-038EPS Replaces FDS02-037EPS

More datasheets: H11AA3300W | H11AA2 | H11AA3 | H11AA4 | H11AA1 | H11AA1300 | DBMMZ13W3SN | DDMM-50S-D | MDM-21PH027P | JBW030A1

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived JBW030A Datasheet file may be downloaded here without warranties.

Datasheet ID: JBW030A 645670