FLT012A0Z

FLT012A0Z Datasheet

FLT012A0Z/FLT012A0-SZ Input Filter Modules

Part	Datasheet
FLT012A0Z	FLT012A0Z (pdf)

Related Parts	Information
FLT012A0-SZ	FLT012A0-SZ

PDF Datasheet Preview
FLT012A0Z/FLT012A0-SZ Input Filter Modules 75Vdc Input Voltage Maximum 12A Output Current Maximum Data Sheet Distributed power architectures Wireless Networks Enterprise Networks Access and Optical Network Equipment Options Surface Mount Interconnect -S Compliant to RoHS EU Directive 2011/65/EU Z versions Compatible in a Pb-free or SnPb reflow environment Z versions Surface Mount and Through hole versions Common-mode and Differential-mode filtering Small size and low profile mm x mm x mm in x in x in Same footprint as FLTR100V10 module Cost efficient open frame design Wide operating temperature range -40°C to +85°C Meets the voltage isolation requirements for ETSI 300-132-2 UL* 60950-1, 2nd Ed. Recognized, CSA† C22.2 No. 60950-1- 07 Certified, and 2nd Ed. Licensed CE mark meets 2006/95/EC directives§ ISO** 9001 and ISO 14001 certified manufacturing facilities The Filter module shall be designed to operate over an input voltage range up to 75Vdc at output current of 12A in an ambient temperature of -40ºC to 85ºC. The filter module shall be optimized for use with dc/dc converter modules, to significantly reduce the conducted differential and common-mode noise returned to the power source. The filter module shall enable designers to meet the requirements of EMI standards CISPR 22 EN55022 and FCC Class B by inserting in-line between the power source and the dc/dc converter module. These modules shall be designed and manufactured to be either surface mounted -S version or through hole mounted on PCBs. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards § This product is intended for integration into end-user equipment All of the required procedures of end-use equipment should be followed. February 4, 2016 2016 General Electric Company. All rights reserved. FLT012A0Z/FLT012A0-SZ Input Filter Modules 75Vdc Input Voltage Maximum 12A Output Current Maximum Data Sheet Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Unit Input Voltage Continuous Transient 100ms Operating Ambient Temperature VIN, TRANS Storage Temperature I/O to Ground Isolation 100% Factory Tested Input to GND Insulation Tstg FLT012A0Z / FLT012A0-SZ FLT012A0-11Z 1500 2000 Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input-to-Output Current VIN= 0 to ViN,max Device Unit 24/48 Imax Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Codes Device Code Input Voltage Range Output Current Connector Type FLT012A0Z 0 75Vdc FLT012A0-SZ 0 75Vdc FLT012A0-11Z 0 75Vdc Comcodes CC109172202 CC109172210 150047449 -11 refers to Special option with withstand voltage of 2000Vdc -Z refers to RoHS-compliant codes Contact Us For more information, call us at USA/Canada +1 877 546 3243, or +1 972 244 9288 Asia-Pacific: Europe, Middle-East and Africa: GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information. February 4, 2016 2016 General Electric Company. All International rights reserved. Version

PDF Datasheet Preview

FLT012A0Z/FLT012A0-SZ Input Filter Modules
75Vdc Input Voltage Maximum 12A Output Current Maximum

Data Sheet

Distributed power architectures Wireless Networks Enterprise Networks Access and Optical Network Equipment

Options

Surface Mount Interconnect -S

Compliant to RoHS EU Directive 2011/65/EU Z versions

Compatible in a Pb-free or SnPb reflow environment Z versions

Surface Mount and Through hole versions Common-mode and Differential-mode filtering Small size and low profile
mm x mm x mm
in x in x in Same footprint as FLTR100V10 module Cost efficient open frame design Wide operating temperature range -40°C to +85°C Meets the voltage isolation requirements for

ETSI 300-132-2 UL* 60950-1, 2nd Ed. Recognized, CSA† C22.2 No. 60950-1-
07 Certified, and 2nd Ed. Licensed CE mark meets 2006/95/EC directives§ ISO** 9001 and ISO 14001 certified manufacturing facilities

The Filter module shall be designed to operate over an input voltage range up to 75Vdc at output current of 12A in an ambient temperature of -40ºC to 85ºC. The filter module shall be optimized for use with dc/dc converter modules, to significantly reduce the conducted differential and common-mode noise returned to the power source. The filter module shall enable designers to meet the requirements of EMI standards CISPR 22 EN55022 and FCC Class B by inserting in-line between the power source and the dc/dc converter module. These modules shall be designed and manufactured to be either surface mounted -S version or through hole mounted on PCBs.
* UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards § This product is intended for integration into end-user equipment All of the required procedures of end-use equipment should be followed.

February 4, 2016
2016 General Electric Company. All rights reserved.

FLT012A0Z/FLT012A0-SZ Input Filter Modules
75Vdc Input Voltage Maximum 12A Output Current Maximum

Data Sheet

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.

Parameter

Device

Unit

Input Voltage

Continuous Transient 100ms Operating Ambient Temperature

VIN, TRANS

Storage Temperature I/O to Ground Isolation 100% Factory Tested Input to GND Insulation

Tstg

FLT012A0Z / FLT012A0-SZ

FLT012A0-11Z
1500
2000

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Parameter Operating Input Voltage Maximum Input-to-Output Current VIN= 0 to ViN,max

Device

Unit
24/48

Imax
Ordering Information

Please contact your GE Sales Representative for pricing, availability and optional features.

Table Device Codes

Device Code

Input Voltage Range

Output Current

Connector Type

FLT012A0Z
0 75Vdc

FLT012A0-SZ
0 75Vdc

FLT012A0-11Z
0 75Vdc

Comcodes

CC109172202 CC109172210
150047449
-11 refers to Special option with withstand voltage of 2000Vdc -Z refers to RoHS-compliant codes

Contact Us

For more information, call us at

USA/Canada +1 877 546 3243, or +1 972 244 9288

Asia-Pacific:

Europe, Middle-East and Africa:

GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information.

February 4, 2016
2016 General Electric Company. All International rights reserved.

Version

More datasheets: 66564-706 | 66564-940LF | 66564-808 | 66564-926 | 66564-940 | 66564-950 | 66564-710 | 66564-806 | 66564-834 | MDM-15PH034B

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FLT012A0Z Datasheet file may be downloaded here without warranties.

Datasheet ID: FLT012A0Z 645646