ATH016A0X43Z

ATH016A0X43Z Datasheet

ATH016A0X3

Part	Datasheet
ATH016A0X43Z	ATH016A0X43Z (pdf)

Related Parts	Information
ATH016A0X3Z	ATH016A0X3Z
ATH016A0X3	ATH016A0X3
ATH016A0X43	ATH016A0X43

PDF Datasheet Preview
Data Sheet Austin SuperLynxTM II SIP Non-Isolated DC-DC Power Module 2.4Vdc input 0.75Vdc to 3.63Vdc output 16A Output Current EZ-SEQUENCETM • Distributed power architectures • Intermediate bus voltage applications • Telecommunications equipment • Servers and storage applications • Networking equipment • Compliant to RoHS EU Directive 2011/65/EU -Z versions • Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant non-Z versions • Flexible output voltage sequencing EZ-SEQUENCE • Delivers up to 16A of output current • High efficiency 95% at 3.3V full load VIN = 5.0V • Small size and low profile: mm x mm x mm in x in x in • Low output ripple and noise • Constant switching frequency 300KHz • High Reliability Calculated MTBF > M hours at 25oC Full-load • Programmable Output voltage programmable • Line Regulation typical • Load Regulation typical • Temperature Regulation typical • Remote On/Off • Remote Sense • Output overcurrent protection non-latching • Overtemperature protection • Wide operating temperature range -40°C to 85°C • UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805:2001-12 EN60950-1 Licensed • ISO** 9001 and ISO 14001 certified manufacturing facilities Austin SuperLynxTM II SIP power modules are non-isolated dc-dc converters that can deliver up to 16A of output current with full load efficiency of 95% at 3.3V output. These modules provide a precisely regulated output voltage programmable via external resistor from 0.75Vdc to 3.3Vdc over a wide range of input voltage VIN = 5.5Vdc . Austin SuperLynxTM II has a sequencing feature, EZ-SEQUENCETM that enable designers to implement various types of output voltage sequencing when powering multiple modules on board. Their open-frame construction and small footprint enable designers to develop cost- and space-efficient solutions. In addition to sequencing, standard features include remote On/Off, remote sense, programmable output voltage, over current and over temperature protection. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards January 14, 2016 2016 General Electric Company. All rights reserved. GE Energy Data Sheet Austin SuperLynxTMII SIP Non-Isolated DC-DC Power Modules 2.4Vdc input 0.75Vdc to 3.63Vdc output 16A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Continuous Sequencing Voltage Operating Ambient Temperature see Thermal Considerations section Storage Temperature Device Unit VSEQ ViN, Max Tstg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input Current VIN= VIN, min to VIN, max, IO=IO, max VO,set = 3.3Vdc Input No Load Current Device VO,set VIN 0.5V IIN,max VO,set = Vdc IIN,No load VIN = 5.0Vdc, IO = 0, module enabled VO,set = 3.3Vdc IIN,No load Input Stand-by Current Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Codes Product codes Input Voltage Output Voltage Output Current Efficiency 3.3V 16A ATH016A0X3 5.5Vdc 3.3Vdc ATH016A0X3Z 5.5Vdc 3.3Vdc ATH016A0X43 5.5Vdc 3.3Vdc ATH016A0X43Z 5.5Vdc 3.3Vdc Connector Type -Z refers to RoHS-compliant versions. Comcodes 108989117 CC109104758 108989125 CC109104766 Contact Us For more information, call us at USA/Canada +1 877 546 3243, or +1 972 244 9288 Asia-Pacific: Europe, Middle-East and Africa: GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information. January 14, 2016 2016 General Electric Company. All International rights reserved. Version

PDF Datasheet Preview

Data Sheet

Austin SuperLynxTM II SIP Non-Isolated DC-DC Power Module
2.4Vdc input 0.75Vdc to 3.63Vdc output 16A Output Current

EZ-SEQUENCETM
• Distributed power architectures
• Intermediate bus voltage applications
• Telecommunications equipment
• Servers and storage applications
• Networking equipment
• Compliant to RoHS EU Directive 2011/65/EU -Z versions
• Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant non-Z versions
• Flexible output voltage sequencing EZ-SEQUENCE
• Delivers up to 16A of output current
• High efficiency 95% at 3.3V full load VIN = 5.0V
• Small size and low profile:
mm x mm x mm in x in x in
• Low output ripple and noise
• Constant switching frequency 300KHz
• High Reliability Calculated MTBF > M hours at 25oC Full-load
• Programmable Output voltage programmable
• Line Regulation typical
• Load Regulation typical
• Temperature Regulation typical
• Remote On/Off
• Remote Sense
• Output overcurrent protection non-latching
• Overtemperature protection
• Wide operating temperature range -40°C to 85°C
• UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805:2001-12 EN60950-1 Licensed
• ISO** 9001 and ISO 14001 certified manufacturing facilities

Austin SuperLynxTM II SIP power modules are non-isolated dc-dc converters that can deliver up to 16A of output current with full load efficiency of 95% at 3.3V output. These modules provide a precisely regulated output voltage programmable via external resistor from 0.75Vdc to 3.3Vdc over a wide range of input voltage VIN = 5.5Vdc . Austin SuperLynxTM II has a sequencing feature, EZ-SEQUENCETM that enable designers to implement various types of output voltage sequencing when powering multiple modules on board. Their open-frame construction and small footprint enable designers to develop cost- and space-efficient solutions. In addition to sequencing, standard features include remote On/Off, remote sense, programmable output voltage, over current and over temperature protection.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards

January 14, 2016
2016 General Electric Company. All rights reserved.

GE Energy

Data Sheet

Austin SuperLynxTMII SIP Non-Isolated DC-DC Power Modules
2.4Vdc input 0.75Vdc to 3.63Vdc output 16A Output Current

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.

Parameter Input Voltage

Continuous Sequencing Voltage Operating Ambient Temperature
see Thermal Considerations section Storage Temperature

Device

Unit

VSEQ

ViN, Max

Tstg

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Parameter Operating Input Voltage Maximum Input Current VIN= VIN, min to VIN, max, IO=IO, max VO,set = 3.3Vdc Input No Load Current

Device

VO,set VIN 0.5V

IIN,max

VO,set = Vdc

IIN,No load

VIN = 5.0Vdc, IO = 0, module enabled

VO,set = 3.3Vdc

IIN,No load

Input Stand-by Current
Ordering Information

Please contact your GE Sales Representative for pricing, availability and optional features.

Table Device Codes

Product codes

Input Voltage Output Voltage Output Current

Efficiency 3.3V 16A

ATH016A0X3
5.5Vdc
3.3Vdc

ATH016A0X3Z
5.5Vdc
3.3Vdc

ATH016A0X43
5.5Vdc
3.3Vdc

ATH016A0X43Z
5.5Vdc
3.3Vdc

Connector Type
-Z refers to RoHS-compliant versions.

Comcodes
108989117 CC109104758
108989125 CC109104766

Contact Us

For more information, call us at

USA/Canada +1 877 546 3243, or +1 972 244 9288

Asia-Pacific:

Europe, Middle-East and Africa:

GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information.

January 14, 2016
2016 General Electric Company. All International rights reserved.

Version

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATH016A0X43Z Datasheet file may be downloaded here without warranties.

Datasheet ID: ATH016A0X43Z 645606