AXH010A0Y

AXH010A0Y Datasheet

AXH010A0S0R9

Part	Datasheet
AXH010A0Y	AXH010A0Y (pdf)

Related Parts	Information
AXH010A0Y5Z	AXH010A0Y5Z
AXH010A0F5	AXH010A0F5
AXH010A0D	AXH010A0D
AXH010A0P5Z	AXH010A0P5Z
AXH010A0P3	AXH010A0P3
AXH010A0P	AXH010A0P
AXH010A0YZ	AXH010A0YZ
AXH010A0Y3	AXH010A0Y3
AXH010A0Y3Z	AXH010A0Y3Z
AXH010A0M	AXH010A0M
AXH010A0G	AXH010A0G
AXH010A0G3	AXH010A0G3
AXH010A0G5	AXH010A0G5
AXH010A0G53	AXH010A0G53
AXH010A0FZ	AXH010A0FZ
AXH010A0MZ	AXH010A0MZ

PDF Datasheet Preview
Data Sheet October 1, 2009 Austin LynxTM SIP Non-Isolated dc-dc Power Modules Vdc - Vdc Input, Vdc - Vdc Output, 10 A n Distributed Power Architectures n Wireless Networks n Access and Optical Network Equipment n Enterprise Networks n Data processing Equipment n Latest generation IC’s DSP, FPGA, ASIC and Micropro- cessor-powered applications. Options n Remote Sense n Long Pins mm ± mm in ± in n Compatible with RoHS EU Directive 200295/EC -Z Versions n Compatible in RoHS EU Directive 200295/EC with lead solder exemption non -Z versions n Delivers up to 10A output current n High efficiency 95% at 3.3V full load n Small size and low profile mm x 8.10mm x 12.7mm in x in x in n Light Weight oz 7.5 g n Cost-efficient open frame design n High reliability MTBF > 10M hours at 25 °C n Remote On/Off n Output overcurrent protection with auto-restart n Overtemperature protection n Constant frequency 300 kHz,typical n Adjustable output voltage ± 10% of VO to + 10% for V output n Single-In-Line SIP Package n UL* 60950 Recognized, CSA† C22.2 No. 60950-00 Certi- fied, and 0805 IEC60950, 3rd edition Licensed Austin Lynx power modules are non-isolated dc-dc converters that can deliver 10 A of output current with full load efficiency of 95% at V output. These open frame modules in SIP package enable designers to develop cost-and space efficient solutions. Standard features include remote ON/OFF, output voltage adjustment, overcurrent and overtemperature protection. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. § This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should be followed. The CE mark is placed on selected products. ** ISO is a registered trademark of the Internation Organization of Standards Document Name FDS02-047EPS ver.1.6 PDF Name Austin Lynx SIP Data Sheet October 1, 2009 Austin LynxTM SIP Non-Isolated dc-dc Power Modules Vdc - Vdc Input, Vdc - Vdc Output, 10 A Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliabiltiy. Input Voltage Continuous Parameter Device Unit Operating Ambient Temperature Storage Temperature Tstg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Unit Operating Input Voltage Austin Lynx SIP power modules offer an option for a Remote Sense function. When the Device Code description includes a suffix “3”, pin 3 is added to the module and the Remote Sense is an active feature. See the Ordering Information at the end of this document for more information. Remote Sense minimizes the effects of distribution losses by Lineage Power Overcurrent Protection To provide protection in a fault condition, the unit is equipped with internal overcurrent protection. The unit operates normally once the fault condition is removed. The power module will supply up to 170% of rated current for less than seconds before it enters thermal shutdown. Overtemperature Protection To provide additional protection in a fault condition, the unit is equipped with a nonlatched thermal shutdown circuit. The shutdown circuit engages when Q1 or Q2 shown in Figure 24 exceeds approximately 110 °C. The unit attempts to restart when Q1 or Q2 cool down and cycles on and off while the fault condition exists. Recovery from shutdown is accomplished when the cause of the overtemperature condition is removed. Data Sheet October 1, 2009 Austin LynxTM SIP Non-Isolated dc-dc Power Modules Vdc - Vdc Input, Vdc - Vdc Output, 10 A Thermal Considerations The power module operates in a variety of thermal environments however, sufficient cooling should be provided to help ensure reliable operation of the unit. Heat is removed by conduction, convection, and radiation to the surrounding environment. The thermal data presented is based on measurements taken in a wind tunnel. The test setup shown in Figure 25 was used to collect data for Figures 26 and Note that the airflow is parallel to the long axis of the module as shown in Figure 24 and derating applies accordingly. Convection Requirements for cooling To predict the approximate cooling needed for the module, refer to the Power Derating curves in Figures 26 and These derating curves are approximations of the ambient temperatures and airflows required to keep the power module temperature below its maximum rating. Once the module is assembled in the actual system, the module’s temperature should be checked as shown in Figure 24 to ensure it does not exceed 110 °C. Proper cooling can be verified by measuring the power module’s temperature at Q1-pin 6 and Q2-pin 6 as shown in Figure Pin 6 Airflow Figure Temperature Measurement Location The temperature at either location should not exceed 110 °C. The output power of the module should not exceed the rated power for the module VO, set x IO, max . Wind Tunnel PWBs Power Module OUTPUT CURRENT IO A m/s 400 ft./min. m/s 200 ft./min. m/s 100 ft./min. NATURAL CONVECTION LOCAL AMBIENT TEMPERATURE, TA Figure Typical Power Derating vs output Current for Vin. OUTPUT CURRENT IO A m/s 400 ft./min. m/s 200 ft./min. m/s 100 ft./min. NATURAL CONVECTION LOCAL AMBIENT TEMPERATURE, TA Figure Typical Power Derating vs output Current for Vin. Air flow Figure Thermal Test Setup. Probe Location for measuring airflow and ambient temperature Lineage Power Data Sheet October 1, 2009 Austin LynxTM SIP Non-Isolated dc-dc Power Modules Vdc - Vdc Input, Vdc - Vdc Output, 10 A Through-Hole Lead-Free Soldering Information The RoHS-compliant through-hole products use the SAC Sn/Ag/Cu Pb-free solder and RoHS-compliant components. They are designed to be processed through single or dual wave soldering machines. The pins have an RoHS-compliant finish that is compatible with both Pb and Pb-free wave soldering processes. A maximum preheat rate of 3°C/s is suggested. The wave preheat process should be such that the temperature of the power module board is kept below 210°C. For Pb solder, the recommended pot temperature is 260°C, while the Pb-free solder pot is 270°C max. Not all RoHS-compliant through-hole products can be processed with paste-through-hole Pb or Pb-free reflow process. If additional information is needed, please consult with your Tyco Electronics Power System representative for more details. Post Solder Cleaning and Drying Considerations Post solder cleaning is usually the final circuit-board assembly process prior to electrical board testing. The result of inadequate cleaning and drying can affect both the reliability of a power module and the testability of the finished circuit-board assembly. For guidance on appropriate soldering, cleaning and drying procedures, refer to Tyco Electronics Board Mounted Power Modules Soldering and Cleaning Application Note AP01-056EPS . Ordering Information Please contact your Lineage Power Sales Representative for pricing, availability and optional features. Input Voltage - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc Output Voltage Output Current 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A Efficiency 83% 85% 86% 88% 90% 91% 92% 95% 86% 88% 90% 91% 92% 95% Connector Type Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Device Code AXH010A0S0R9 AXH010A0S1R0 AXH010A0P AXH010A0M AXH010A0Y AXH010A0D AXH010A0G AXH010A0F AXH010A0PZ AXH010A0MZ AXH010A0YZ AXH010A0DZ AXH010A0GZ AXH010A0FZ Comcodes 108966250 108966185 108966235 108966227 108966243 108966193 108966219 108966201 CC109106952 CC109106936 CC109101788 CC109106845 CC109101771 CC109104898 Optional features can be ordered using the suffixes shown below. The suffixes follow the last letter of the Product Code and are placed in descending alphanumerical order. Table Device Options Remote Sense Long Pins mm ± mm in ± in. Option Suffix 3 5 Asia-Pacific Headquart ers Tel +65 6 41 6 4283 World Wide Headquarters Lineage Power Corporation 601 Shiloh Road, Plano, TX75074, USA +1-800-526-7819 Outsid e U.S.A +1- 97 2-244-9428 agepower.com e-m ail gepower.com Europe, Middle-East and Afric a He adquarters Tel +49 898 780 672 80 India Headquarters Tel +91 8 0 28411633 Lineage Power reserves the right to make changes to the product s or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information. Lineage Power DC-DC Products are protected under various patents. Information on these patents is available at 2009 Lineage Power Corpor ation, Plano, Texas All International Rights Reser ved. Document No FDS02-047EPS ver.1.6 PDF Name Austin Lynx SIP

PDF Datasheet Preview

Data Sheet October 1, 2009

Austin LynxTM SIP Non-Isolated dc-dc Power Modules Vdc - Vdc Input, Vdc - Vdc Output, 10 A
n Distributed Power Architectures n Wireless Networks n Access and Optical Network Equipment n Enterprise Networks n Data processing Equipment n Latest generation IC’s DSP, FPGA, ASIC and Micropro-
cessor-powered applications.

Options
n Remote Sense n Long Pins mm ± mm
in ± in
n Compatible with RoHS EU Directive 200295/EC -Z Versions
n Compatible in RoHS EU Directive 200295/EC with lead solder exemption non -Z versions
n Delivers up to 10A output current
n High efficiency 95% at 3.3V full load
n Small size and low profile mm x 8.10mm x 12.7mm in x in x in
n Light Weight oz 7.5 g
n Cost-efficient open frame design
n High reliability MTBF > 10M hours at 25 °C
n Remote On/Off
n Output overcurrent protection with auto-restart
n Overtemperature protection
n Constant frequency 300 kHz,typical
n Adjustable output voltage ± 10% of VO to + 10% for V output
n Single-In-Line SIP Package n UL* 60950 Recognized, CSA† C22.2 No. 60950-00 Certi-
fied, and 0805 IEC60950, 3rd edition Licensed

Austin Lynx power modules are non-isolated dc-dc converters that can deliver 10 A of output current with full load efficiency of 95% at V output. These open frame modules in SIP package enable designers to develop cost-and space efficient solutions. Standard features include remote ON/OFF, output voltage adjustment, overcurrent and overtemperature protection.
* UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. § This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should be followed. The CE mark is placed on selected products. ** ISO is a registered trademark of the Internation Organization of Standards

Document Name FDS02-047EPS ver.1.6 PDF Name Austin Lynx SIP

Data Sheet October 1, 2009

Austin LynxTM SIP Non-Isolated dc-dc Power Modules Vdc - Vdc Input, Vdc - Vdc Output, 10 A

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliabiltiy.

Input Voltage Continuous

Parameter

Device

Unit

Operating Ambient Temperature Storage Temperature

Tstg

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Parameter

Device

Unit

Operating Input Voltage
Austin Lynx SIP power modules offer an option for a Remote Sense function. When the Device Code description includes a suffix “3”, pin 3 is added to the module and the Remote Sense is an active feature. See the Ordering Information at the end of this document for more information.

Remote Sense minimizes the effects of distribution losses by Lineage Power

Overcurrent Protection To provide protection in a fault condition, the unit is equipped with internal overcurrent protection. The unit operates normally once the fault condition is removed. The power module will supply up to 170% of rated current for less than seconds before it enters thermal shutdown. Overtemperature Protection To provide additional protection in a fault condition, the unit is equipped with a nonlatched thermal shutdown circuit. The shutdown circuit engages when Q1 or Q2 shown in Figure 24 exceeds approximately 110 °C. The unit attempts to restart when Q1 or Q2 cool down and cycles on and off while the fault condition exists. Recovery from shutdown is accomplished when the cause of the overtemperature condition is removed.

Data Sheet October 1, 2009

Austin LynxTM SIP Non-Isolated dc-dc Power Modules Vdc - Vdc Input, Vdc - Vdc Output, 10 A

Thermal Considerations

The power module operates in a variety of thermal environments however, sufficient cooling should be provided to help ensure reliable operation of the unit. Heat is removed by conduction, convection, and radiation to the surrounding environment. The thermal data presented is based on measurements taken in a wind tunnel. The test setup shown in Figure 25 was used to collect data for Figures 26 and Note that the airflow is parallel to the long axis of the module as shown in Figure 24 and derating applies accordingly.

Convection Requirements for cooling

To predict the approximate cooling needed for the module, refer to the Power Derating curves in Figures 26 and

These derating curves are approximations of the ambient temperatures and airflows required to keep the power module temperature below its maximum rating. Once the module is assembled in the actual system, the module’s temperature should be checked as shown in Figure 24 to ensure it does not exceed 110 °C.

Proper cooling can be verified by measuring the power module’s temperature at Q1-pin 6 and Q2-pin 6 as shown in Figure

Pin 6

Airflow

Figure Temperature Measurement Location

The temperature at either location should not exceed 110 °C. The output power of the module should not exceed the rated power for the module VO, set x IO, max .

Wind Tunnel PWBs

Power Module

OUTPUT CURRENT IO A
m/s 400 ft./min.
m/s 200 ft./min.
m/s 100 ft./min.

NATURAL CONVECTION

LOCAL AMBIENT TEMPERATURE, TA

Figure Typical Power Derating vs output Current for Vin.

OUTPUT CURRENT IO A
m/s 400 ft./min.
m/s 200 ft./min.
m/s 100 ft./min.

NATURAL CONVECTION

LOCAL AMBIENT TEMPERATURE, TA

Figure Typical Power Derating vs output Current for Vin.

Air flow

Figure Thermal Test Setup.

Probe Location for measuring airflow and ambient temperature

Lineage Power

Data Sheet October 1, 2009

Austin LynxTM SIP Non-Isolated dc-dc Power Modules Vdc - Vdc Input, Vdc - Vdc Output, 10 A

Through-Hole Lead-Free Soldering Information

The RoHS-compliant through-hole products use the SAC Sn/Ag/Cu Pb-free solder and RoHS-compliant components. They are designed to be processed through single or dual wave soldering machines. The pins have an RoHS-compliant finish that is compatible with both Pb and Pb-free wave soldering processes. A maximum preheat rate of 3°C/s is suggested. The wave preheat process should be such that the temperature of the power module board is kept below 210°C. For Pb solder, the recommended pot temperature is 260°C, while the Pb-free solder pot is 270°C max. Not all RoHS-compliant through-hole products can be processed with paste-through-hole Pb or Pb-free reflow process. If additional information is needed, please consult with your Tyco Electronics Power System representative for more details.

Post Solder Cleaning and Drying Considerations

Post solder cleaning is usually the final circuit-board assembly process prior to electrical board testing. The result of inadequate cleaning and drying can affect both the reliability of a power module and the testability of the finished circuit-board assembly. For guidance on appropriate soldering, cleaning and drying procedures, refer to Tyco Electronics Board Mounted Power Modules Soldering and Cleaning Application Note AP01-056EPS .
Ordering Information

Please contact your Lineage Power Sales Representative for pricing, availability and optional features.

Input Voltage
- Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc - Vdc

Output Voltage

Output Current
10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A

Efficiency
83% 85% 86% 88% 90% 91% 92% 95% 86% 88% 90% 91% 92% 95%

Connector Type

Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole Through-Hole

Device Code

AXH010A0S0R9 AXH010A0S1R0

AXH010A0P AXH010A0M AXH010A0Y AXH010A0D AXH010A0G AXH010A0F AXH010A0PZ AXH010A0MZ AXH010A0YZ AXH010A0DZ AXH010A0GZ AXH010A0FZ

Comcodes
108966250 108966185 108966235 108966227 108966243 108966193 108966219 108966201 CC109106952 CC109106936 CC109101788 CC109106845 CC109101771 CC109104898

Optional features can be ordered using the suffixes shown below. The suffixes follow the last letter of the Product Code and are placed in descending alphanumerical order.

Table Device Options

Remote Sense

Long Pins mm ± mm in ± in.

Option

Suffix 3 5

Asia-Pacific Headquart ers Tel +65 6 41 6 4283

World Wide Headquarters Lineage Power Corporation 601 Shiloh Road, Plano, TX75074, USA +1-800-526-7819 Outsid e U.S.A +1- 97 2-244-9428 agepower.com e-m ail gepower.com

Europe, Middle-East and Afric a He adquarters Tel +49 898 780 672 80

India Headquarters Tel +91 8 0 28411633

Lineage Power reserves the right to make changes to the product s or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information.

Lineage Power DC-DC Products are protected under various patents. Information on these patents is available at
2009 Lineage Power Corpor ation, Plano, Texas All International Rights Reser ved.

Document No FDS02-047EPS ver.1.6

PDF Name Austin Lynx SIP

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AXH010A0Y Datasheet file may be downloaded here without warranties.

Datasheet ID: AXH010A0Y 645599