ATH006A0X-SR

ATH006A0X-SR Datasheet

ATH006A0X-SR ATH006A0X-SRZ ATH006A0X4-SR ATH006A0X4-SRZ

Part	Datasheet
ATH006A0X-SR	ATH006A0X-SR (pdf)

Related Parts	Information
ATH006A0X4-SR	ATH006A0X4-SR

PDF Datasheet Preview
GE Energy Data Sheet 6A Austin MicroLynx IITM SMT Non-Isolated DC-DC Power Module 2.4Vdc input 0.75Vdc to 3.63Vdc output 6A Output Current • Compliant to RoHS EU Directive 2011/65/EU -Z versions • Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant non-Z versions • Flexible output voltage sequencing EZ-SEQUENCETM • Delivers up to 6A output current • High efficiency 96% at 3.3V full load VIN = 5.0V • Small size and low profile: • Distributed power architectures • Intermediate bus voltage applications • Telecommunications equipment • Servers and storage applications • Networking equipment • Enterprise Networks • Latest generation IC’s DSP, FPGA, ASIC and Microprocessor powered applications mm x mm x mm in x in x in • Low output ripple and noise • High Reliability Calculated MTBF = 12.8M hours at 25oC Full-load • Output voltage programmable from Vdc to 3.63Vdc via external resistor • Line Regulation typical • Load Regulation typical • Temperature Regulation % typical • Remote On/Off • Output overcurrent protection non-latching • Wide operating temperature range -40°C to 85°C • UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805:2001-12 EN60950-1 Licensed • ISO** 9001 and ISO 14001 certified manufacturing facilities Austin MicroLynxTM II SMT surface mount technology power modules are non-isolated dc-dc converters that can deliver up to 6A of output current with full load efficiency of at 3.3V output. These modules provide a precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage VIN = 5.5Vdc . Austin MicroLynxTM II has a sequencing feature, EZ-SEQUENCETM that enable designers to implement various types of output voltage sequencing when powering multiple modules on board. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards October 1, 2015 2015 General Electric Company. All rights reserved. GE Energy Data Sheet 6A Austin MicroLynxTMII SMT Non-Isolated DC-DC Power Modules 2.4Vdc input 0.75Vdc to 3.63Vdc output 6A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Continuous Sequencing voltage Operating Ambient Temperature see Thermal Considerations section Storage Temperature Device Vseq Tstg Unit VIN,max Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input Current VIN= VIN, min to VIN, max, IO=IO, max Input No Load Current Device Vo,set IIN,max VO,set = Vdc IIN,No load Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Codes Device Code Input Voltage Range Output Voltage Output Current Efficiency 6A On/Off Logic ATH006A0X-SR ATH006A0X-SRZ ATH006A0X4-SR ATH006A0X4-SRZ 5.5Vdc 3.63Vdc 5.5Vdc 3.63Vdc 5.5Vdc 3.63Vdc 5.5Vdc 3.63Vdc Negative Positive Connector Type -Z refers to RoHS compliant parts Comcodes 108988358 CC109104535 108988366 108996708 Contact Us For more information, call us at USA/Canada +1 877 546 3243, or +1 972 244 9288 Asia-Pacific: Europe, Middle-East and Africa: GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information. October 1, 2015 2015 General Electric Company. All International rights reserved. Version

PDF Datasheet Preview

GE Energy

Data Sheet
6A Austin MicroLynx IITM SMT Non-Isolated DC-DC Power Module
2.4Vdc input 0.75Vdc to 3.63Vdc output 6A Output Current
• Compliant to RoHS EU Directive 2011/65/EU -Z versions
• Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant non-Z versions
• Flexible output voltage sequencing EZ-SEQUENCETM
• Delivers up to 6A output current
• High efficiency 96% at 3.3V full load VIN = 5.0V
• Small size and low profile:
• Distributed power architectures
• Intermediate bus voltage applications
• Telecommunications equipment
• Servers and storage applications
• Networking equipment
• Enterprise Networks
• Latest generation IC’s DSP, FPGA, ASIC and

Microprocessor powered applications
mm x mm x mm in x in x in
• Low output ripple and noise
• High Reliability Calculated MTBF = 12.8M hours at 25oC Full-load
• Output voltage programmable from Vdc to 3.63Vdc via external resistor
• Line Regulation typical
• Load Regulation typical
• Temperature Regulation % typical
• Remote On/Off
• Output overcurrent protection non-latching
• Wide operating temperature range -40°C to 85°C
• UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805:2001-12 EN60950-1 Licensed
• ISO** 9001 and ISO 14001 certified manufacturing facilities

Austin MicroLynxTM II SMT surface mount technology power modules are non-isolated dc-dc converters that can deliver up to 6A of output current with full load efficiency of at 3.3V output. These modules provide a precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage VIN = 5.5Vdc . Austin MicroLynxTM II has a sequencing feature, EZ-SEQUENCETM that enable designers to implement various types of output voltage sequencing when powering multiple modules on board.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards

October 1, 2015
2015 General Electric Company. All rights reserved.

GE Energy

Data Sheet
6A Austin MicroLynxTMII SMT Non-Isolated DC-DC Power Modules
2.4Vdc input 0.75Vdc to 3.63Vdc output 6A Output Current

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.

Parameter Input Voltage

Continuous Sequencing voltage Operating Ambient Temperature see Thermal Considerations section Storage Temperature

Device

Vseq

Tstg

Unit

VIN,max

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Parameter Operating Input Voltage Maximum Input Current VIN= VIN, min to VIN, max, IO=IO, max Input No Load Current

Device Vo,set

IIN,max

VO,set = Vdc

IIN,No load
Ordering Information

Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Codes

Device Code

Input Voltage Range

Output Voltage

Output Current

Efficiency 6A

On/Off Logic

ATH006A0X-SR ATH006A0X-SRZ ATH006A0X4-SR ATH006A0X4-SRZ
5.5Vdc
3.63Vdc
5.5Vdc
3.63Vdc
5.5Vdc
3.63Vdc
5.5Vdc
3.63Vdc

Negative Positive

Connector Type
-Z refers to RoHS compliant parts

Comcodes
108988358 CC109104535
108988366 108996708

Contact Us

For more information, call us at

USA/Canada +1 877 546 3243, or +1 972 244 9288

Asia-Pacific:

Europe, Middle-East and Africa:

GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information.

October 1, 2015
2015 General Electric Company. All International rights reserved.

Version

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATH006A0X-SR Datasheet file may be downloaded here without warranties.

Datasheet ID: ATH006A0X-SR 645592