ATA016A0X3

ATA016A0X3 Datasheet

Data Sheet

Part	Datasheet
ATA016A0X3	ATA016A0X3 (pdf)

Related Parts	Information
ATA016A0X43	ATA016A0X43

PDF Datasheet Preview
Data Sheet 12V Austin SuperLynxTMII SIP Non-Isolated DC-DC Power Modules 8.3Vdc input 0.75Vdc to 5.5Vdc output 16A Output Current • Compliant to RoHS EU Directive 2011/65/EU -Z versions • Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant non-Z versions • Flexible output voltage sequencing EZ-SEQUENCETM EZ-SEQUENCETM • Delivers up to 16A output current • High efficiency 92% at 3.3V full load VIN = 12.0V • Small size and low profile: • Distributed power architectures • Intermediate bus voltage applications • Telecommunications equipment • Servers and storage applications • Networking equipment • Enterprise Networks • Latest generation IC’s DSP, FPGA, ASIC and Microprocessor powered applications mm x mm x mm in x in x in • Low output ripple and noise • Constant switching frequency 300KHz • High Reliability Calculated MTBF = 9.2M hours at 25oC Full-load • Programmable Output voltage • Line Regulation typical • Load Regulation typical • Temperature Regulation % typical • Remote On/Off • Remote Sense • Output overcurrent protection non-latching • Wide operating temperature range -40°C to 85°C • UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805:2001-12 EN60950-1 Licensed • ISO** 9001 and ISO 14001 certified manufacturing facilities Austin SuperLynxTM II 12V SIP single in-line package power modules are non-isolated dc-dc converters that can deliver up to 16A of output current with full load efficiency of 92% at 3.3V output. These modules provide a precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 5.0Vdc over a wide range of input voltage VIN = 14Vdc . Austin SuperLynxTM II has a sequencing feature, EZ-SEQUENCETM that enable designers to implement various types of output voltage sequencing when powering multiple modules on board. Their open-frame construction and small footprint enable designers to develop cost- and space-efficient solutions. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards August 19, 2016 2016 General Electric Company. All rights reserved. Data Sheet 12V Austin SuperLynxTMII SIP Non-Isolated DC-DC Power Modules 8.3Vdc input 0.75Vdc to 5.5Vdc output 16A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Continuous Sequencing voltage Operating Ambient Temperature see Thermal Considerations section Storage Temperature Device Unit Vseq VIN,max Tstg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input Current VIN= VIN, min to VIN, max, IO=IO, max Input No Load Current Device Vo,set Vo,set > IIN,max Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Codes Device Code ATA016A0X3 Input Voltage 14Vdc ATA016A0X3Z 14Vdc ATA016A0X43 14Vdc ATA016A0X43Z 14Vdc ATA016A0X3-73Z* 14Vdc Output Voltage 5.5Vdc 5.5Vdc 5.5Vdc 5.5Vdc 5.5Vdc Output Current 16 A 16 A 16 A 16 A 16 A Efficiency 16A Connector Type SIP Comcodes 108989091 CC109104691 108989100 CC109104700 150052629 -Z refers to RoHS-compliant versions. Special Codes, consult factory before ordering Table Device Option Option Suffix** Long Pins mm ± 0.25mm in. ± in. * Contact GE Sales Representative for availability of these options, samples, minimum order quantity and lead times ** When adding multiple options to the product code, add suffix numbers in the descending order Contact Us For more information, call us at USA/Canada +1 877 546 3243, or +1 972 244 9288 Asia-Pacific: Europe, Middle-East and Africa: GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information. August 19, 2016 2016 General Electric Company. All International rights reserved. Version

PDF Datasheet Preview

Data Sheet
12V Austin SuperLynxTMII SIP Non-Isolated DC-DC Power Modules
8.3Vdc input 0.75Vdc to 5.5Vdc output 16A Output Current
• Compliant to RoHS EU Directive 2011/65/EU -Z versions
• Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant non-Z versions
• Flexible output voltage sequencing EZ-SEQUENCETM

EZ-SEQUENCETM
• Delivers up to 16A output current
• High efficiency 92% at 3.3V full load VIN = 12.0V
• Small size and low profile:
• Distributed power architectures
• Intermediate bus voltage applications
• Telecommunications equipment
• Servers and storage applications
• Networking equipment
• Enterprise Networks
• Latest generation IC’s DSP, FPGA, ASIC and

Microprocessor powered applications
mm x mm x mm in x in x in
• Low output ripple and noise
• Constant switching frequency 300KHz
• High Reliability Calculated MTBF = 9.2M hours at 25oC Full-load
• Programmable Output voltage
• Line Regulation typical
• Load Regulation typical
• Temperature Regulation % typical
• Remote On/Off
• Remote Sense
• Output overcurrent protection non-latching
• Wide operating temperature range -40°C to 85°C
• UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805:2001-12 EN60950-1 Licensed
• ISO** 9001 and ISO 14001 certified manufacturing facilities

Austin SuperLynxTM II 12V SIP single in-line package power modules are non-isolated dc-dc converters that can deliver up to 16A of output current with full load efficiency of 92% at 3.3V output. These modules provide a precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 5.0Vdc over a wide range of input voltage VIN = 14Vdc . Austin SuperLynxTM II has a sequencing feature, EZ-SEQUENCETM that enable designers to implement various types of output voltage sequencing when powering multiple modules on board. Their open-frame construction and small footprint enable designers to develop cost- and space-efficient solutions.
* UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards

August 19, 2016
2016 General Electric Company. All rights reserved.

Data Sheet
12V Austin SuperLynxTMII SIP Non-Isolated DC-DC Power Modules
8.3Vdc input 0.75Vdc to 5.5Vdc output 16A Output Current

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.

Parameter Input Voltage

Continuous Sequencing voltage Operating Ambient Temperature see Thermal Considerations section Storage Temperature

Device

Unit

Vseq

VIN,max

Tstg

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Parameter Operating Input Voltage

Maximum Input Current VIN= VIN, min to VIN, max, IO=IO, max Input No Load Current

Device

Vo,set

Vo,set >

IIN,max
Ordering Information

Please contact your GE Sales Representative for pricing, availability and optional features.

Table Device Codes

Device Code ATA016A0X3

Input Voltage
14Vdc

ATA016A0X3Z
14Vdc

ATA016A0X43
14Vdc

ATA016A0X43Z 14Vdc

ATA016A0X3-73Z* 14Vdc

Output Voltage 5.5Vdc 5.5Vdc 5.5Vdc 5.5Vdc 5.5Vdc

Output Current
16 A 16 A 16 A 16 A 16 A

Efficiency 16A

Connector Type SIP

Comcodes
108989091 CC109104691
108989100 CC109104700
150052629
-Z refers to RoHS-compliant versions. *Special Codes, consult factory before ordering

Table Device Option

Option*

Suffix**

Long Pins mm ± 0.25mm in. ± in.
* Contact GE Sales Representative for availability of these options, samples, minimum order quantity and lead times ** When adding multiple options to the product code, add suffix numbers in the descending order

Contact Us

For more information, call us at

USA/Canada +1 877 546 3243, or +1 972 244 9288

Asia-Pacific:

Europe, Middle-East and Africa:

GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information.

August 19, 2016
2016 General Electric Company. All International rights reserved.

Version

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATA016A0X3 Datasheet file may be downloaded here without warranties.

Datasheet ID: ATA016A0X3 645583