ATA010A0X3

ATA010A0X3 Datasheet


Data Sheet

Part Datasheet
ATA010A0X3 ATA010A0X3 ATA010A0X3 (pdf)
Related Parts Information
ATA010A0X43 ATA010A0X43 ATA010A0X43
PDF Datasheet Preview
Data Sheet
12V Austin LynxTMII SIP Non-Isolated DC-DC Power Modules
8.3Vdc 14Vdc input 0.75Vdc to 5.5Vdc output 10A Output Current
• Compliant to RoHS EU Directive 2011/65/EU -Z versions
• Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant non-Z versions
• Flexible output voltage sequencing EZ-SEQUENCETM
• Delivers up to 10A output current

EZ-SEQUENCETM
• High efficiency 93% at 3.3V full load VIN = 12.0V
• Small size and low profile:
mm x mm x mm in x in x in
• Distributed power architectures
• Intermediate bus voltage applications
• Telecommunications equipment
• Servers and storage applications
• Networking equipment
• Enterprise Networks
• Latest generation IC’s DSP, FPGA, ASIC and

Microprocessor powered applications
• Low output ripple and noise
• High Reliability:

Calculated MTBF = 15M hours at 25oC Full-load
• Constant switching frequency 300 kHz
• Output voltage programmable from Vdc to 5.5Vdc
via external resistor
• Line Regulation typical
• Load Regulation typical
• Temperature Regulation % typical
• Remote On/Off
• Remote sense
• Output overcurrent protection non-latching
• Wide operating temperature range -40°C to 85°C
• UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805:2001-12 EN60950-1 Licensed
• ISO** 9001 and ISO 14001 certified manufacturing facilities

Austin LynxTM II 12V SIP singe in-line package power modules are non-isolated dc-dc converters that can deliver up to 10A of output current with full load efficiency of 93% at 3.3V output. These modules provide a precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 5.0Vdc over a wide range of input voltage VIN = 14Vdc . The Austin LynxTM II 12V series has a sequencing feature, EZ-SEQUENCETM that enable designers to implement various types of output voltage sequencing when powering multiple voltages on a board.
* UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards

August 16, 2016
2015 General Electric Company. All rights reserved.

Data Sheet
12V Austin LynxTMII SIP Non-Isolated DC-DC Power Modules
8.3Vdc input 0.75Vdc to 5.5Vdc output 10A Output Current

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.

Parameter Input Voltage

Continuous Sequencing voltage Operating Ambient Temperature see Thermal Considerations section Storage Temperature

Device

Vseq

Tstg

Unit

VIN,max

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Parameter Operating Input Voltage

Maximum Input Current VIN=2.4V to 5.5V, IO=IO, max Input No Load Current

VIN = 12.0Vdc, IO = 0, module enabled Input Stand-by Current
Ordering Information

Please contact your GE Sales Representative for pricing, availability and optional features.

Table Device Codes

Device Code

Input Voltage Range

Output Voltage

Output Current

Efficiency 10A

On/Off Logic

ATA010A0X3
14Vdc
5.5Vdc

Negative

ATA010A0X43
14Vdc
5.5Vdc

Positive

ATA010A0X3Z
14Vdc
5.5Vdc

Negative

ATA010A0X43Z
14Vdc
5.5Vdc

Positive

ATA010A0X3-73Z*
14Vdc
5.5Vdc

Negative

Connector Type
-Z refers to RoHS compliant codes *Special Codes, consult factory before ordering

Comcodes
108989050 108989067 CC109104667 CC109104683 150052595

Contact Us

For more information, call us at

USA/Canada +1 877 546 3243, or +1 972 244 9288

Asia-Pacific:

Europe, Middle-East and Africa:

GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information.

August 16, 2016
2015 General Electric Company. All International rights reserved.

Version
More datasheets: MAN3620A | MAN3630A | MAN3810A | MAN73A | MAN3840A | MAN3640A | MAN3410A | BSO094N03S | CA3102R28-21PBF80A176 | ATA010A0X43


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATA010A0X3 Datasheet file may be downloaded here without warranties.

Datasheet ID: ATA010A0X3 645576