GS1011MEE-EVK2-S2W-WEB

GS1011MEE-EVK2-S2W-WEB Datasheet

GainSpan GS1011M EVK Mrk II Evaluation Kit

Part	Datasheet
GS1011MEE-EVK2-S2W-WEB	GS1011MEE-EVK2-S2W-WEB (pdf)

Related Parts	Information
GS1011MIP-EVK2-S2W-WEB	GS1011MIP-EVK2-S2W-WEB

PDF Datasheet Preview
T BRIEF GainSpan GS1011M EVK Mrk II Evaluation Kit PRODUCT OVERVIEW The GS1011M EVK Mrk II Evaluation Kit provides GainSpan customers the means to evaluate capabilities of the GS1011 ultra-low power wireless system-on-a-chip and the Serial-to-WiFi embedded software for Wi-Fi networks. The Serial-to-WiFi embedded software allows devices and appliances manufacturers to easily add Wi-Fi capabilities to their products with minimal impact on host microcontroller firmware. The GS1011M EVK Mrk II Evaluation Kit provides all the hardware and software necessary to quickly set up a serial UART or SPI based link to a PC or external microcontroller. In order to evaluate the ease of adding secure Wi-Fi communications to a product using the GainSpan AT command set, the kit includes all the software tools necessary for configuration of Serial-to-Wi-Fi and GS1011M modules, data transfer using “AT” command-set and protocol analyzer for validation of packet & frame fields. For additional details on the module features, please refer to the GS1011M module product briefs. Host Microcontroller Embedded Application Serial-to-WiFi “Driver” SPI or UART GS1011M Serial-to-WiFi Power Management SSL Server TCP/IP Device Drivers RTOS WPA/2 WPS MAC The GS1011M EVK Mrk II Evaluation Kit enables GainSpan customers to develop software on their existing microcontrollers to support the “AT” command set, and connect it to either the UART or SPI interface on the evaluation kit reference board. BENEFITS • GS1011M highly integrated ultra- low power 802.11b Wi-Fi radio Family of modules • Easy integration of Wi-Fi and web connectivity to devices with existing microcontroller and UART or SPI interface • Easy device provisioning through LimitedAP embedded web pages or Wi-Fi Protected Set-up WPS • Serial to Wi-Fi firmware allows easy addition of Wi-Fi capabilities to embedded system • Offloads Wi-Fi and TCP/ IP networking from smaller host microcontrollers • Simple AT commands for configuration and data communication • Support for over the air firmware updates using external flash FEATURES • Supports Infrastructure, Limited AP and Adhoc networking • Two UART and SPI ports. Clock Data rates are o UART up to 921 Kbps o SPI up to 3 Mbps • Push button for Alarms and Firmware Restore from External Flash • Full Wi-Fi and networking stack services including TCP/UDP/IP, DNS, DHCP, and SSL • Wi-Fi Security o WEP, WPA/WPA2 Personal o WPA/WAP2 Enterprise o Wi-Fi Protected Setup WPS • Power Save Modes PS-Poll, Sleep, Deep Sleep, Standby AT COMMAND SET The ‘AT’ command set supports the full range of capabilities provided by the underlying GainSpan network services software that abstract the complexity of IP networking and Wi-Fi communication from the embedded application, allowing complete control. Types Commands Serial Interface Configuration Set Serial Parameters baud rate, flow control Profile Management Load/Save/Restore profiles Wi-Fi Interface Scan/associate/disassociate Security Enable/set security Network Management Static or DHCP client/server, DNS client/server Connection management client/server EVALUATION KIT ORDERING INFORMATION ITEM GS1011M EVK Mrk II Evaluation Kit GS1011MIP-EVK2-S2W-WEB GS1011MEP-EVK2-S2W-WEB GS1011MIE-EVK2-S2W-WEB GS1011MEE-EVK2-S2W-WEB Serial to Wi-Fi Evaluation kit based on the ultra-low power GS1011M module base board. The Serial to Wi-Fi firmware supports embedded webserver for provisioning GainSpan Corporation; GS1011M EVK PB

PDF Datasheet Preview

T BRIEF

GainSpan GS1011M EVK Mrk II Evaluation Kit

PRODUCT OVERVIEW

The GS1011M EVK Mrk II Evaluation Kit provides GainSpan customers the means to evaluate capabilities of the GS1011 ultra-low power wireless system-on-a-chip and the Serial-to-WiFi embedded software for Wi-Fi networks. The Serial-to-WiFi embedded software allows devices and appliances manufacturers to easily add Wi-Fi capabilities to their products with minimal impact on host microcontroller firmware.

The GS1011M EVK Mrk II Evaluation Kit provides all the hardware and software necessary to quickly set up a serial UART or SPI based link to a PC or external microcontroller. In order to evaluate the ease of adding secure Wi-Fi communications to a product using the GainSpan AT command set, the kit includes all the software tools necessary for configuration of Serial-to-Wi-Fi and GS1011M modules, data transfer using “AT” command-set and protocol analyzer for validation of packet & frame fields. For additional details on the module features, please refer to the GS1011M module product briefs.

Host Microcontroller

Embedded Application

Serial-to-WiFi “Driver”

SPI or UART

GS1011M

Serial-to-WiFi Power Management

SSL Server

TCP/IP Device Drivers

RTOS WPA/2 WPS MAC

The GS1011M EVK Mrk II Evaluation Kit enables GainSpan customers to develop software on their existing microcontrollers to support the “AT” command set, and connect it to either the UART or SPI interface on the evaluation kit reference board.

BENEFITS
• GS1011M highly integrated ultra- low power
802.11b Wi-Fi radio Family of modules
• Easy integration of Wi-Fi and web
connectivity to devices with existing microcontroller and UART or SPI interface
• Easy device provisioning through LimitedAP embedded web pages or Wi-Fi Protected Set-up WPS
• Serial to Wi-Fi firmware allows easy addition of Wi-Fi capabilities to embedded system
• Offloads Wi-Fi and TCP/ IP networking from smaller host microcontrollers
• Simple AT commands for configuration and data communication
• Support for over the air firmware updates using external flash

FEATURES
• Supports Infrastructure, Limited AP and

Adhoc networking
• Two UART and SPI ports. Clock Data rates
are o UART up to 921 Kbps o SPI up to 3 Mbps
• Push button for Alarms and Firmware Restore from External Flash
• Full Wi-Fi and networking stack services including TCP/UDP/IP, DNS, DHCP, and SSL
• Wi-Fi Security o WEP, WPA/WPA2 Personal o WPA/WAP2 Enterprise o Wi-Fi Protected Setup WPS
• Power Save Modes PS-Poll, Sleep, Deep Sleep, Standby

AT COMMAND SET The ‘AT’ command set supports the full range of capabilities provided by the underlying GainSpan network services software that
abstract the complexity of IP networking and Wi-Fi communication from the embedded application, allowing complete control.

Types

Commands

Serial Interface Configuration

Set Serial Parameters baud rate, flow control

Profile Management

Load/Save/Restore profiles

Wi-Fi Interface

Scan/associate/disassociate

Security

Enable/set security

Network Management

Static or DHCP client/server, DNS client/server

Connection management
client/server
EVALUATION KIT ORDERING INFORMATION

ITEM

GS1011M EVK Mrk II Evaluation Kit

GS1011MIP-EVK2-S2W-WEB GS1011MEP-EVK2-S2W-WEB GS1011MIE-EVK2-S2W-WEB GS1011MEE-EVK2-S2W-WEB

Serial to Wi-Fi Evaluation kit based on the ultra-low power GS1011M module base board. The Serial to Wi-Fi firmware supports embedded webserver for provisioning

GainSpan Corporation;

GS1011M EVK PB

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived GS1011MEE-EVK2-S2W-WEB Datasheet file may be downloaded here without warranties.

Datasheet ID: GS1011MEE-EVK2-S2W-WEB 635737