WAB-GW-GS2011MIZ

WAB-GW-GS2011MIZ Datasheet

The Wi-Fi Adapter Board WAB is a GS2011MIZ Wi-Fi module based hardware adapter board that can be interfaced to a microcontroller MCU development board to enable Wi-Fi connectivity in MCU based applications. It provides the means to evaluate the capabilities of GainSpan’s lowpower GS2011MIZ Wi-Fi modules and Serial-to-Wi-Fi embedded software, and develop software for MCU host-based Wi-Fi enabled devices.

Part	Datasheet
WAB-GW-GS2011MIZ	WAB-GW-GS2011MIZ (pdf)

PDF Datasheet Preview
T BRIEF PRELIMINARY PRODUCT BRIEF GS2011M Wi-Fi Adapter Board PRODUCT OVERVIEW The Wi-Fi Adapter Board WAB is a GS2011MIZ Wi-Fi module based hardware adapter board that can be interfaced to a microcontroller MCU development board to enable Wi-Fi connectivity in MCU based applications. It provides the means to evaluate the capabilities of GainSpan’s lowpower GS2011MIZ Wi-Fi modules and Serial-to-Wi-Fi embedded software, and develop software for MCU host-based Wi-Fi enabled devices. The WAB supports IEEE 802.11b/g/n protocols and includes a GainSpan GS2011MIZ soldered down module. It communicates with the MCU over the SPI or UART interface. It is designed to plug into various MCU development platforms such as RL78, RX62/RX63, RX100/200/600, SuperH and others, using the PMOD and Application Header interface. The boards have built-in external flash for reliable over the air firmware upgrade, factory restore configuration as well as data storage for web pages. The WAB comes with pre-loaded Serial-to-Wi-Fi application firmware that supports complete Wi-Fi and networking stacks, Wi-Fi and application layer security, Wi-Fi and IP network configuration web pages, as well as the Limited AP capability for ease of provisioning. The Serial-to-Wi-Fi embedded software allows devices and appliances manufacturers to easily add Wi-Fi capabilities to their products with minor impact on the host microcontroller firmware. Small-footprint drivers and reference code are available for a variety of MCUs. Software and documentation for the WAB is available on the GainSpan customer support portal. BENEFITS: • Wi-Fi Adapter board for enabling Wi-Fi connectivity in MCU based applications with minor impact on host firmware • Easy integration of Wi-Fi and web connectivity with MCU based embedded devices, over UART or SPI interface • Allows evaluation of capabilities of the GS2000 SoC and enables customer application development • Serial-to-WiFi software allows easy addition of Wi-Fi capabilities to hosted embedded system using AT commands FEATURES • Highly integrated, ultra-low power 802.11b/g/n GS2011MIZ Wi-Fi modules • PMOD and Application header interfaces to plug into MCU development platforms • Multiple serial ports o UART up to 921 Kbps o SPI up to 30MHz master mode 10MHz slave mode • Programmed with Serial-to-WiFi software including o Full Wi-Fi and networking stack - WiFi security WEP, WPA/2 , WPS, TCP/UDP/IP, DNS, DHCP, DTLS, CoAP, TLS/SSL o Complete set of AT commands to communicate with the host MCU • Push buttons for Factory Restore and Reset • Jumpers for serial interface selection and power measurement PRELIMINARY PRODUCT BRIEF WI-FI ADAPTER BOARD SPECIFICATIONS Feature RF Module Radio Protocol Antenna Type Power Source I/O Interfaces Push Buttons Jumpers Connector Serial Flash Description GS2011MIZ Ultra-Low Power Module IEEE b/g/n, 2.4GHz Ceramic Antenna PMOD or Application Header Connector UART, SPI, GPIO Factory Restore and Reset UART or SPI Selection, Current Measurement PMOD and Application Header Interface External Flash for storing web pages or firmware code base for factory restore WI-FI ADAPTER BOARD ORDERING INFORMATION ITEM GS2011M Wi-Fi Adapter Board PART NUMBER WAB-GW-GS2011MIZ Description 802.11b/g/n Wi-Fi Adapter Board with a GS2011MIZ module Copyright 2014 GainSpan Corporation. All Rights Reserved. GS2K_WAB_PB Release 3590 N. First Street, Suite 300 San Jose, CA 95134 Tel +1 408 627-6500

PDF Datasheet Preview

T BRIEF PRELIMINARY PRODUCT BRIEF

GS2011M Wi-Fi Adapter Board

PRODUCT OVERVIEW

The Wi-Fi Adapter Board WAB is a GS2011MIZ Wi-Fi module based hardware adapter board that can be interfaced to a microcontroller MCU development board to enable Wi-Fi connectivity in MCU based applications. It provides the means to evaluate the capabilities of GainSpan’s lowpower GS2011MIZ Wi-Fi modules and Serial-to-Wi-Fi embedded software, and develop software for MCU host-based Wi-Fi enabled devices.

The WAB supports IEEE 802.11b/g/n protocols and includes a GainSpan GS2011MIZ soldered down module. It communicates with the MCU over the SPI or UART interface. It is designed to plug into various MCU development platforms such as RL78, RX62/RX63, RX100/200/600, SuperH and others, using the PMOD and Application Header interface. The boards have built-in external flash for reliable over the air firmware upgrade, factory restore configuration as well as data storage for web pages.

The WAB comes with pre-loaded Serial-to-Wi-Fi application firmware that supports complete Wi-Fi and networking stacks, Wi-Fi and application layer security, Wi-Fi and IP network configuration web pages, as well as the Limited AP capability for ease of provisioning. The Serial-to-Wi-Fi embedded software allows devices and appliances manufacturers to easily add Wi-Fi capabilities to their products with minor impact on the host microcontroller firmware. Small-footprint drivers and reference code are available for a variety of MCUs.

Software and documentation for the WAB is available on the GainSpan customer support portal.

BENEFITS:
• Wi-Fi Adapter board for enabling Wi-Fi connectivity in MCU based applications with minor impact on host firmware
• Easy integration of Wi-Fi and web connectivity with MCU based embedded devices, over UART or SPI interface
• Allows evaluation of capabilities of the GS2000 SoC and enables customer application development
• Serial-to-WiFi software allows easy addition of Wi-Fi capabilities to hosted embedded system using AT commands

FEATURES
• Highly integrated, ultra-low power
802.11b/g/n GS2011MIZ Wi-Fi modules
• PMOD and Application header interfaces to
plug into MCU development platforms
• Multiple serial ports
o UART up to 921 Kbps o SPI up to 30MHz master mode
10MHz slave mode
• Programmed with Serial-to-WiFi software including o Full Wi-Fi and networking stack - WiFi security WEP, WPA/2 , WPS, TCP/UDP/IP, DNS, DHCP, DTLS, CoAP, TLS/SSL o Complete set of AT commands to communicate with the host MCU
• Push buttons for Factory Restore and Reset
• Jumpers for serial interface selection and power measurement

PRELIMINARY PRODUCT BRIEF

WI-FI ADAPTER BOARD SPECIFICATIONS

Feature RF Module Radio Protocol Antenna Type Power Source I/O Interfaces Push Buttons Jumpers Connector Serial Flash

Description GS2011MIZ Ultra-Low Power Module IEEE b/g/n, 2.4GHz Ceramic Antenna PMOD or Application Header Connector UART, SPI, GPIO Factory Restore and Reset UART or SPI Selection, Current Measurement PMOD and Application Header Interface External Flash for storing web pages or firmware code base for factory restore
WI-FI ADAPTER BOARD ORDERING INFORMATION

ITEM GS2011M Wi-Fi Adapter Board

PART NUMBER WAB-GW-GS2011MIZ

Description 802.11b/g/n Wi-Fi Adapter Board with a GS2011MIZ module

Copyright 2014 GainSpan Corporation. All Rights Reserved. GS2K_WAB_PB Release
3590 N. First Street, Suite 300 San Jose, CA 95134 Tel +1 408 627-6500

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived WAB-GW-GS2011MIZ Datasheet file may be downloaded here without warranties.

Datasheet ID: WAB-GW-GS2011MIZ 635733