USB-ICP-80C51ISP
USB-ICP-80C51ISP Datasheet
USB-ICP
| Part | Datasheet |
|---|---|
USB-ICP-80C51ISP |
USB-ICP-80C51ISP (pdf) |
| PDF Datasheet Preview |
|---|
| USB-ICP USB In-Circuit Programmer USB-ICP supports In-System Programming ISP on Philips 80C51 Flash based microcontroller families. In-System Programming uses a two-wire serial interface to program and erase ISP enabled microcontroller devices without removing them from the system. The ISP function uses only six pins VCC, GND, RXD, TXD, PSEN- and RESET. A small connector is all that is needed to interface your ISP application to the USB-ICP programmer. Highlights • USB port powered so no external Power Supply required • Supports USB • Plugs directly into any standard USB Port great for laptops • Supports Philips’ P89C51 Flash family of microcontrollers • Works with Philips’ free Flash Magic software that can be downloaded from the web • USB-ICP Kit Includes: USB-ICP dongle 18” cable allowing direct connection to the user's application ISP design guide for the user’s target board Technical Details Target Schematic USB-ICP uses a standard RJ-45 for connection to the target cable. Indicator LEDs Green “Link” Indicates the USB-ICP has been configured by the host PC Yellow indicates USB Activity Rx/Tx RESET PSEN- The ISP function uses only six pins VCC, GND, RXD, TXD, PSEN- and RESET. The simple circuit above is all that must be added to the user’s application to use ISP with USB-ICP. Target Connector The target connector utilized is a standard pitch 6-pin header available from numerous suppliers. Example Molex Part Numbers 22-03-2061 6pin vertical through hole 68301-1017 6pin vertical surface mount 22-05-2061 6pin right angle through hole Ordering Information Part Number USB-ICP-80C51ISP Digi-Key P/N 622-1001-ND Warranty 30-day money back guarantee Availability Stock 800 278-0293 Phone 256 883-1241 FAX USB ICP Family Supports USB-ICP-LPC9xx Philips LPC9xx USB-ICP-80C51ISP USB-ICP-LPC2K Philips P89C51 Flash Philips ARM7 LPC2xxx All brand names and product names are trademarks or registered trademarks of their respective holders. |
| More datasheets: B3B-EH-A | B6B-EH-A | B5B-EH-A | S4B-EH | B4B-EH-A | B7B-EH-A | B2B-EH-A | IDT76BDLS02500CPA | APT5020BN | APT5022BNG |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived USB-ICP-80C51ISP Datasheet file may be downloaded here without warranties.