WAB-GW-GS1500M

WAB-GW-GS1500M Datasheet

• The WAB-GS1011-MIP supports IEEE 802.11b protocol and includes a GainSpan GS1011MIP soldered down module

Part	Datasheet
WAB-GW-GS1500M	WAB-GW-GS1500M (pdf)

Related Parts	Information
WAB-GW-GS1011MIP	WAB-GW-GS1011MIP

PDF Datasheet Preview
T BRIEF PRODUCT BRIEF - PRELIMINARY Serial to Adapter Board PRODUCT OVERVIEW The Serial to Wi-Fi Adapter Boards provide the means to evaluate the capabilities of GainSpan’s low power Wi-Fi modules and the Serial to Wi-Fi embedded software, and develop Wi-Fi enabled devices using Renesas microcontrollers. They are designed to plug into Renesas Development Kits RDK through the Application Header Interface or the PMOD interface. The Wi-Fi adapter boards are available in two configurations: • The WAB-GS1011-MIP supports IEEE 802.11b protocol and includes a GainSpan GS1011MIP soldered down module • The WAB-GS-1500M supports IEEE 802.11b/g/n protocols and includes a GainSpan GS1500M soldered down module The Wi-Fi adapter boards come with pre-loaded serial to Wi-Fi firmware that supports an embedded server with Wi-Fi and IP network configuration pages, as well as the limited AP capability for ease of provisioning. The Serial to Wi-Fi embedded software allows devices and appliances manufacturers to easily add Wi-Fi capabilities to their products with minor impact on the host microcontroller firmware. Drivers are available or in development for most Renesas microcontrollers including RL78, RX62, RX63, R8C, V850, SuperH, 78K0, 78K0R. The drivers have a small footprint so they can be used with IAR Embedded Workbench-Kickstart Edition. To download software and documentation go to: The Wi-Fi adapter boards have built-in external flash for reliable over the air firmware upgrade, factory restore configuration as well as data storage such as for web pages. WIFI-ADAPTER BOARD DETAILS: Radio Protocol IEEE 802.11b for WAB-GW-GS1011MIP IEEE 802.11b/g/n for WAB-GW-GS1500M RF Module GS1011MIP or GS1500M RF Output Power Typical 8 dBm for GS1011MIP 14 dBm 802.11b 12dBm 802.11n for GS1500M Radio Frequency Antenna Type On-board PCB Trace I/O Port SPI or UART Jumper To select UART or SPI Current measurement mode Switch Factory Code Restore Interfaces/ Connectors Factory Application Header Interface, PMOD interface Power Source From Renesas RDK or PMOD Dimensions in WI-FI ADAPTER BOARD ORDERING INFORMATION ITEM GS1011 Wi-Fi Adapter Board WAB-GW-GS1011MIP GS1500 Wi-Fi Adapter Board WAB-GW-GS1500M 802.11b Adapter Board with a GS1011MIP module internal PA and on-board PCB antenna 802.11b/g/n Adapter Board with GS1500M module GainSpan Corporation All Rights Reserved.

PDF Datasheet Preview

T BRIEF

PRODUCT BRIEF - PRELIMINARY

Serial to Adapter Board

PRODUCT OVERVIEW

The Serial to Wi-Fi Adapter Boards provide the means to evaluate the capabilities of GainSpan’s low power Wi-Fi modules and the Serial to Wi-Fi embedded software, and develop Wi-Fi enabled devices using Renesas microcontrollers. They are designed to plug into Renesas Development Kits RDK through the Application Header Interface or the PMOD interface.

The Wi-Fi adapter boards are available in two configurations:
• The WAB-GS1011-MIP supports IEEE 802.11b protocol and includes a GainSpan GS1011MIP soldered down module
• The WAB-GS-1500M supports IEEE 802.11b/g/n protocols and includes a GainSpan GS1500M soldered down module

The Wi-Fi adapter boards come with pre-loaded serial to Wi-Fi firmware that supports an embedded server with Wi-Fi and IP network configuration pages, as well as the limited AP capability for ease of provisioning. The Serial to Wi-Fi embedded software allows devices and appliances manufacturers to easily add Wi-Fi capabilities to their products with minor impact on the host microcontroller firmware.

Drivers are available or in development for most Renesas microcontrollers including RL78, RX62, RX63, R8C, V850, SuperH, 78K0, 78K0R. The drivers have a small footprint so they can be used with IAR Embedded Workbench-Kickstart Edition. To download software and documentation go to:

The Wi-Fi adapter boards have built-in external flash for reliable over the air firmware upgrade, factory restore configuration as well as data storage such as for web pages.

WIFI-ADAPTER BOARD DETAILS:

Radio Protocol

IEEE 802.11b for WAB-GW-GS1011MIP IEEE 802.11b/g/n for WAB-GW-GS1500M

RF Module

GS1011MIP or GS1500M

RF Output Power Typical
8 dBm for GS1011MIP 14 dBm 802.11b 12dBm 802.11n for GS1500M

Radio Frequency

Antenna Type

On-board PCB Trace

I/O Port

SPI or UART

Jumper

To select UART or SPI Current measurement mode

Switch

Factory Code Restore

Interfaces/ Connectors

Factory Application Header Interface, PMOD interface

Power Source

From Renesas RDK or PMOD

Dimensions in
WI-FI ADAPTER BOARD ORDERING INFORMATION

ITEM

GS1011 Wi-Fi Adapter Board

WAB-GW-GS1011MIP

GS1500 Wi-Fi Adapter Board

WAB-GW-GS1500M
802.11b Adapter Board with a GS1011MIP module internal PA and on-board PCB antenna
802.11b/g/n Adapter Board with GS1500M module

GainSpan Corporation All Rights Reserved.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived WAB-GW-GS1500M Datasheet file may be downloaded here without warranties.

Datasheet ID: WAB-GW-GS1500M 635711