LCD-DEMO-KIT

LCD-DEMO-KIT Datasheet

LCD Demo

Part	Datasheet
LCD-DEMO-KIT	LCD-DEMO-KIT (pdf)

PDF Datasheet Preview
LCD Demo Highlights • Low-cost 2-chip solution for LCD User Interface • Flexible layout supports 3 microcontroller options 10 pin HVSON to 28 pin PLCC package 1KB to 8KB internal Flash memory • 8-character alphanumeric LCD • I2C based LCD driver with 128 segment support • Powered by a single 3V coin cell battery • Two miniature push-buttons for user control • Reprogrammable by the user via 10-pin ICP header The NXP LCD Demo is a reference design for a low cost microcontroller and LCD solution. The two main NXP parts used in this design can be purchased for less than in 1,000 unit quantities and only a few other external components are required. The Demo Board is controlled by a simple two-button user interface MODE and SELECT . The Demo Board CD includes example code for several sample applications an FM Radio display during a simulated channel scan, a 15 minute count down timer, a repeating pattern of 4 text lines and a scrolling message window. The user can edit this code and download to the reprogrammable Flash microcontroller via a 10-pin header included on the board using any external ICP style programmer. A small USB based ICP programmer that allows ICP programming of the P89LPC9103 and many other NXP microcontrollers from any PC with a USB port is also available from Future Designs, Inc. Details can be found at P89LPC9103 8-bit, 2-clock, 80C51 MCU • 1 KB Flash, 128 bytes RAM • 10-pin HVSON package 3 x 3mm2 • Internal RC Oscillator • UART, ADC, DAC • Two 16-bit timers & RTC • Keypad Interrupt • WDT with on chip 400kHz oscillator PCF8562TT Single-chip LCD controller/driver • 48-Pin TSSOP package • 32 x 4-bit RAM for display data storage • 400 kHz I2C-bus interface • No external components • Wide supply range Flexible board design LPC9103, LPC9107 & LPC93x microcontrollers can be installed by the customer for prototyping new designs. Ordering Information Part Number LCD-DEMO-KIT Order Online Now at: NXP OM10088 12 NC # 935282474598 Contents LCD Demo Board - P89LPC9103 1KB Flash microcontroller - PCF8562TT 128-segment LCD Driver - 8-character alphanumeric LCD - 3V Coin Cell Battery Warranty 30-day money back guarantee Availability Stock 256 883-1240 Phone 256 883-1241 FAX E-mail: LCD Demo CD - I2C bit-bang code for LCD Driver - Demo application code - Schematic - In Circuit Programming ICP Documentation All brand names and product names are trademarks or registered trademarks of their respective holders.

PDF Datasheet Preview

LCD Demo

Highlights
• Low-cost 2-chip solution for LCD User Interface
• Flexible layout supports 3 microcontroller options
10 pin HVSON to 28 pin PLCC package 1KB to 8KB internal Flash memory
• 8-character alphanumeric LCD
• I2C based LCD driver with 128 segment support
• Powered by a single 3V coin cell battery
• Two miniature push-buttons for user control
• Reprogrammable by the user via 10-pin ICP header The NXP LCD Demo is a reference design for a low cost microcontroller and LCD solution. The two main NXP parts used in this design can be purchased for less than in 1,000 unit quantities and only a few other external components are required. The Demo Board is controlled by a simple two-button user interface MODE and SELECT . The Demo Board CD includes example code for several sample applications an FM Radio display during a simulated channel scan, a 15 minute count down timer, a repeating pattern of 4 text lines and a scrolling message window. The user can edit this code and download to the reprogrammable Flash microcontroller via a 10-pin header included on the board using any external ICP style programmer. A small USB based ICP programmer that allows ICP programming of the P89LPC9103 and many other NXP microcontrollers from any PC with a USB port is also available from Future Designs, Inc. Details can be found at

P89LPC9103 8-bit, 2-clock, 80C51 MCU
• 1 KB Flash, 128 bytes RAM
• 10-pin HVSON package 3 x 3mm2
• Internal RC Oscillator
• UART, ADC, DAC
• Two 16-bit timers & RTC
• Keypad Interrupt
• WDT with on chip 400kHz oscillator

PCF8562TT Single-chip LCD controller/driver
• 48-Pin TSSOP package
• 32 x 4-bit RAM for display data storage
• 400 kHz I2C-bus interface
• No external components
• Wide supply range

Flexible board design LPC9103, LPC9107 & LPC93x microcontrollers can be installed by the customer for prototyping new designs.
Ordering Information

Part Number LCD-DEMO-KIT Order Online Now at:

NXP OM10088 12 NC # 935282474598

Contents

LCD Demo Board - P89LPC9103 1KB Flash microcontroller - PCF8562TT 128-segment LCD Driver - 8-character alphanumeric LCD - 3V Coin Cell Battery

Warranty 30-day money back guarantee Availability Stock
256 883-1240 Phone 256 883-1241 FAX

E-mail:

LCD Demo CD - I2C bit-bang code for LCD Driver - Demo application code - Schematic - In Circuit Programming ICP Documentation

All brand names and product names are trademarks or registered trademarks of their respective holders.

More datasheets: 74977-101001 | 74977-302057 | 74977-101021 | 74977-101013 | 74977-103001 | 74977-104011 | 74977-101011 | 74977-101052 | 74977-104002 | 74977-102001

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LCD-DEMO-KIT Datasheet file may be downloaded here without warranties.

Datasheet ID: LCD-DEMO-KIT 635704