MB9BF104NPMC-G-JNE1

MB9BF104NPMC-G-JNE1 Datasheet

FM3 MB9B100 Series

Part	Datasheet
MB9BF104NPMC-G-JNE1	MB9BF104NPMC-G-JNE1 (pdf)

Related Parts	Information
MB9BF104RPMC-G-JNE1	MB9BF104RPMC-G-JNE1
MB9BF106NPMC-G-JNE1	MB9BF106NPMC-G-JNE1
MB9BF106RPMC-GE1	MB9BF106RPMC-GE1

PDF Datasheet Preview
DS706-00007-1v0-E 32-bit ARMTM CortexTM-M3 based Microcontroller FM3 MB9B100 Series MB9BF104N/R, F105N/R, F106N/R The MB9B100 Series are a highly integrated 32-bit microcontroller that target for high-performance and cost-sensitive embedded control applications. The MB9B100 Series are based on the ARM Cortex-M3 Processor and on-chip Flash memory and SRAM, and peripheral functions, including Motor Control Timers, ADCs and Communication Interfaces UART, SIO, I2C, LIN . Note ARM and Cortex-M3 are the trademarks of ARM Limited in the EU and other countries. FUJITSU SEMICONDUCTOR LIMITED All rights reserved MB9B100 Series 32-bit ARM Cortex-M3 Core Processor version r2p0 Up to 80MHz Frequency Operation Memory Protection Unit MPU improve the reliability of an embedded system Integrated Nested Vectored Interrupt Controller NVIC 1 NMI non-maskable interrupt and 48 peripheral interrupts and 16 priority levels 24-bit System timer Sys Tick System timer for OS task management On-chip Memories [Flash memory] Up to 512 Kbyte Read cycle to 60MHz, 2wait-cycle* above * Instruction pre-fetch buffer is included. So when CPU access continuously, it becomes 0wait-cycle Security function for code protection [SRAM] MB9B100 Series contain a total of up to 64Kbyte on-chip SRAM memories. This is composed of two independent SRAM for CPU and DMA Controller can process simultaneously. Up to 32 Kbyte SRAM for high-performance CPU Up to 32 Kbyte SRAM for CPU/DMA Controller External Bus Interface Supports SRAM, NOR& NAND Flash device Up to 8 chip selects 8/16-bit Data width Up to 25-bit Address bit Multi-function Serial Interface Max. 8channels 4 channels with 16-byte FIFO ch.4-ch.7 , 4 channels without FIFO ch.0-ch.3 Operation mode is selectable from the followings for each channel. UART CSIO LIN I2C [UART] Full-duplex double buffer Selection with or without parity supported Built-in dedicated baud rate generator External clock available as a serial clock Hardware Flow control Automatically control the transmission by CTS/RTS only ch.4 Various error detect functions available parity errors, framing errors, and overrun errors [CSIO] Full-duplex double buffer Built-in dedicated baud rate generator Overrun error detect function available DS706-00007-1v0-E MB9B100 Series [I2C] Standard mode Max.100kbps / High-speed mode Max.400Kbps supported DMA Controller 8channels DMA Controller has an independent bus for CPU, so CPU and DMA Controller can process simultaneously. 8 independently configured and operated channels Transfer can be started by software or request from the built-in peripherals Transfer address area 32bit 4Gbyte Transfer mode Block transfer/Burst transfer/Demand transfer data type byte/half-word/word Transfer block count 1 to 16 Number of transfers 1 to 65536 A/D Converter Max. 16channels [12-bit A/D Converter] Successive Approximation Register type Built-in 3unit Conversion time Priority conversion available priority at 2levels Scanning conversion mode Built-in FIFO for conversion data storage for SCAN conversion 16steps, for Priority conversion 4steps Base Timer Max. 8channels Operation mode is selectable from the followings for each channel. 16-bit PWM timer 16-bit PPG timer 16/32-bit reload timer 16/32-bit PWC timer General Purpose I/O Port MB9B100 series can use its pins as I/O ports when they are not used for external bus or peripherals. Moreover, the port relocate function is built in. It can set which I/O port the peripheral function can be allocated. Capable of pull-up control per pin Capable of reading pin level directly Built-in the port relocate function Up to 100 fast I/O Package DS706-00007-1v0-E MB9B100 Series Multi-function Timer Max. 2unit The Multi-function timer is composed of the following blocks. 16-bit free-run timer x 3ch/unit Input capture x 4ch/unit Output compare x 6ch/unit A/D activating compare x 3ch/unit Waveform generator x 3ch/unit 16-bit PPG timer x 3ch/unit The following function can be used to achieve the motor control. PWM signal output function DC chopper waveform output function Dead time function Input capture function A/D convertor activate function DTIF Motor emergency stop interrupt function ORDERING INFORMATION Part number MB9BF104NPMC MB9BF105NPMC MB9BF106NPMC MB9BF104RPMC MB9BF105RPMC MB9BF106RPMC MB9BF104NBGL MB9BF105NBGL MB9BF106NBGL * ES product only Package pitch ,100-pin FPT-100P-M20/M23 pitch ,100-pin FPT-100P-M20/M23 pitch ,100-pin FPT-100P-M20/M23 pitch ,120-pin FPT-120P-M21 pitch ,120-pin FPT-120P-M21 pitch ,120-pin FPT-120P-M21 pitch ,112-pin BGA-112P-M04 pitch ,112-pin BGA-112P-M04 pitch ,112-pin BGA-112P-M04 DS706-00007-1v0-E MB9B100 Series PACKAGE DIMENSIONS 100-pin plastic LQFP FPT-100P-M20 Lead pitch Package width x package length Lead shape mm x mm Gullwing Sealing method Plastic mold Mounting height mm Max Weight Code Reference g P-LFQFP100-14x14-0.50 100-pin plastic LQFP FPT-100P-M20 16.00±0.20 .630±.008 SQ 14.00±0.10 .551±.004 SQ Note 1 * These dimensions do not include resin protrusion. Note 2 Pins width and pins thickness include plating thickness. Note 3 Pins width do not include tie bar cutting remainder. INDEX Details of "A" part Mounting height 0°~8° Stand off C 2005 -2010 FUJITSU SEMICONDUCTOR LIMITED F100031S-c-3-5 Please check the latest package dimension at the following URL. Dimensions in mm inches . Note The values in parentheses are reference values DS706-00007-1v0-E All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU SEMICONDUCTOR device FUJITSU SEMICONDUCTOR does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU SEMICONDUCTOR assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU SEMICONDUCTOR or any third party or does FUJITSU SEMICONDUCTOR warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU SEMICONDUCTOR assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated 1 for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system , or 2 for use requiring extremely high reliability i.e., submersible repeater and artificial satellite . Please note that FUJITSU SEMICONDUCTOR will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of overcurrent levels and other abnormal operating conditions. Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. The company names and brand names herein are the trademarks or registered trademarks of their respective owners. Edited Sales Promotion Department

PDF Datasheet Preview

DS706-00007-1v0-E
32-bit ARMTM CortexTM-M3 based Microcontroller

FM3 MB9B100 Series

MB9BF104N/R, F105N/R, F106N/R

The MB9B100 Series are a highly integrated 32-bit microcontroller that target for high-performance and cost-sensitive embedded control applications. The MB9B100 Series are based on the ARM Cortex-M3 Processor and on-chip Flash memory and SRAM, and peripheral functions, including Motor Control Timers, ADCs and Communication Interfaces UART, SIO, I2C, LIN .

Note ARM and Cortex-M3 are the trademarks of ARM Limited in the EU and other countries.

FUJITSU SEMICONDUCTOR LIMITED All rights reserved

MB9B100 Series
32-bit ARM Cortex-M3 Core

Processor version r2p0 Up to 80MHz Frequency Operation Memory Protection Unit MPU improve the reliability of an embedded system Integrated Nested Vectored Interrupt Controller NVIC 1 NMI non-maskable interrupt and 48
peripheral interrupts and 16 priority levels 24-bit System timer Sys Tick System timer for OS task management

On-chip Memories
[Flash memory] Up to 512 Kbyte Read cycle to 60MHz, 2wait-cycle* above * Instruction pre-fetch buffer is included. So when CPU access continuously, it becomes 0wait-cycle Security function for code protection
[SRAM] MB9B100 Series contain a total of up to 64Kbyte on-chip SRAM memories. This is composed of two independent SRAM for CPU and DMA Controller can process simultaneously.

Up to 32 Kbyte SRAM for high-performance CPU Up to 32 Kbyte SRAM for CPU/DMA Controller

External Bus Interface

Supports SRAM, NOR& NAND Flash device Up to 8 chip selects 8/16-bit Data width Up to 25-bit Address bit

Multi-function Serial Interface Max. 8channels
4 channels with 16-byte FIFO ch.4-ch.7 , 4 channels without FIFO ch.0-ch.3 Operation mode is selectable from the followings for each channel.

UART CSIO LIN I2C [UART] Full-duplex double buffer Selection with or without parity supported Built-in dedicated baud rate generator External clock available as a serial clock Hardware Flow control Automatically control the transmission by CTS/RTS only ch.4 Various error detect functions available parity errors, framing errors, and overrun errors [CSIO] Full-duplex double buffer Built-in dedicated baud rate generator Overrun error detect function available

DS706-00007-1v0-E

MB9B100 Series
[I2C] Standard mode Max.100kbps / High-speed mode Max.400Kbps supported

DMA Controller 8channels

DMA Controller has an independent bus for CPU, so CPU and DMA Controller can process simultaneously.
8 independently configured and operated channels Transfer can be started by software or request from the built-in peripherals Transfer address area 32bit 4Gbyte Transfer mode Block transfer/Burst transfer/Demand transfer data type byte/half-word/word Transfer block count 1 to 16 Number of transfers 1 to 65536

A/D Converter Max. 16channels
[12-bit A/D Converter] Successive Approximation Register type Built-in 3unit Conversion time Priority conversion available priority at 2levels Scanning conversion mode Built-in FIFO for conversion data storage for SCAN conversion 16steps, for Priority conversion 4steps

Base Timer Max. 8channels

Operation mode is selectable from the followings for each channel.
16-bit PWM timer 16-bit PPG timer 16/32-bit reload timer 16/32-bit PWC timer

General Purpose I/O Port

MB9B100 series can use its pins as I/O ports when they are not used for external bus or peripherals. Moreover, the port relocate function is built in. It can set which I/O port the peripheral function can be allocated.

Capable of pull-up control per pin Capable of reading pin level directly Built-in the port relocate function Up to 100 fast I/O Package

DS706-00007-1v0-E

MB9B100 Series

Multi-function Timer Max. 2unit

The Multi-function timer is composed of the following blocks.
16-bit free-run timer x 3ch/unit Input capture x 4ch/unit Output compare x 6ch/unit A/D activating compare x 3ch/unit Waveform generator x 3ch/unit 16-bit PPG timer x 3ch/unit

The following function can be used to achieve the motor control.

PWM signal output function DC chopper waveform output function Dead time function Input capture function A/D convertor activate function DTIF Motor emergency stop interrupt function
ORDERING INFORMATION

Part number MB9BF104NPMC MB9BF105NPMC MB9BF106NPMC MB9BF104RPMC MB9BF105RPMC MB9BF106RPMC MB9BF104NBGL MB9BF105NBGL MB9BF106NBGL * ES product only

Package
pitch ,100-pin FPT-100P-M20*/M23
pitch ,100-pin FPT-100P-M20*/M23
pitch ,100-pin FPT-100P-M20*/M23
pitch ,120-pin FPT-120P-M21
pitch ,120-pin FPT-120P-M21
pitch ,120-pin FPT-120P-M21
pitch ,112-pin BGA-112P-M04
pitch ,112-pin BGA-112P-M04
pitch ,112-pin BGA-112P-M04

DS706-00007-1v0-E

MB9B100 Series

PACKAGE DIMENSIONS
100-pin plastic LQFP

FPT-100P-M20

Lead pitch

Package width x package length

Lead shape
mm x mm

Gullwing

Sealing method

Plastic mold

Mounting height
mm Max

Weight

Code Reference
g P-LFQFP100-14x14-0.50
100-pin plastic LQFP FPT-100P-M20
16.00±0.20 .630±.008 SQ *14.00±0.10 .551±.004 SQ

Note 1 * These dimensions do not include resin protrusion. Note 2 Pins width and pins thickness include plating thickness. Note 3 Pins width do not include tie bar cutting remainder.

INDEX

Details of "A" part

Mounting height
0°~8°

Stand off

C 2005 -2010 FUJITSU SEMICONDUCTOR LIMITED F100031S-c-3-5

Please check the latest package dimension at the following URL.

Dimensions in mm inches . Note The values in parentheses are reference values

DS706-00007-1v0-E
All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU SEMICONDUCTOR device FUJITSU SEMICONDUCTOR does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU SEMICONDUCTOR assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU SEMICONDUCTOR or any third party or does FUJITSU SEMICONDUCTOR warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU SEMICONDUCTOR assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated 1 for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system , or 2 for use requiring extremely high reliability i.e., submersible repeater and artificial satellite . Please note that FUJITSU SEMICONDUCTOR will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of overcurrent levels and other abnormal operating conditions. Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. The company names and brand names herein are the trademarks or registered trademarks of their respective owners.

Edited Sales Promotion Department

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MB9BF104NPMC-G-JNE1 Datasheet file may be downloaded here without warranties.

Datasheet ID: MB9BF104NPMC-G-JNE1 635675