FTLX8574D3BCV
FTLX8574D3BCV Datasheet
1G/10G 850nm Multimode Datacom SFP+ Transceiver FTLX8574D3BCV
| Part | Datasheet |
|---|---|
FTLX8574D3BCV |
FTLX8574D3BCV (pdf) |
| PDF Datasheet Preview |
|---|
| Product Specification 1G/10G 850nm Multimode Datacom SFP+ Transceiver FTLX8574D3BCV PRODUCT FEATURES • Hot-pluggable SFP+ footprint • Supports rate selectable Gb/s or to Gb/s bit rates • Power dissipation < 1W • RoHS-6 compliant lead-free • Commercial temperature range -5°C to 70°C • Single 3.3V power supply • Maximum link length of 400m on OM4 MMF • Uncooled 850nm VCSEL laser • Receiver limiting electrical interface • Duplex LC connector • Built-in digital diagnostic functions APPLICATIONS • 1000BASE-SX 1G Ethernet • 10GBASE-SR/SW 10G Ethernet Finisar’s FTLX8574D3BCV 1G/10G Dual-Rate SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-84311, IEEE 10GBASE-SR/SW2 and 1000BASE-SX3. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF84724. The FTLX8574D3BCV is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperability with an SFP+ limiting module. This product is for applications specifically designed for 10G SFP+ ports and 1G/10G SFP+ ports and not native 1G SFP ports. The optical transceiver is compliant per the RoHS Directive 2011/65/EU5. See Finisar Application Note AN-20386 for more details. PRODUCT SELECTION FTLX8574D3BCV Finisar Corporation - June 2015 FTLX8574D3BCV Product Specification I. Pin Descriptions Name/Description Ref. VEET Transmitter Ground Common with Receiver Ground TFAULT Transmitter Fault. TDIS Transmitter Disable. Laser output disabled on high or open. 2-wire Serial Interface Data Line 2-wire Serial Interface Clock Line 6 MOD_ABS Module Absent. Grounded within the module RS0 for Rate Select Open or Low = Module supports Gb/s High = Module supports Gb/s to Gb/s RX_LOS Loss of Signal indication. Logic 0 indicates normal operation. No connection required VEER Receiver Ground Common with Transmitter Ground VEER Receiver Ground Common with Transmitter Ground Receiver Inverted DATA out. AC Coupled Receiver Non-inverted DATA out. AC Coupled VEER |
| More datasheets: MST4411C | MST4911C | MST4141C | MST4441C | MST4111C | PN3569_D74Z | PN3569_D75Z | PN3569_D26Z | PN3569_J05Z | PN3569 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FTLX8574D3BCV Datasheet file may be downloaded here without warranties.