FTLX1811M3

FTLX1811M3 Datasheet

FTLX1811M3

Part	Datasheet
FTLX1811M3	FTLX1811M3 (pdf)

PDF Datasheet Preview
Finisar Product Specification RoHS-6 Compliant 10Gb/s 80km Multi-Rate XFP Optical Transceiver FTLX1811M3 PRODUCT FEATURES • Supports 9.95Gb/s to 11.1Gb/s bit rates • Hot-pluggable XFP footprint • Maximum link length of 80km • RoHS-6 compliant lead-free • Temperature-stabilized EML transmitter • Duplex LC connector • Power dissipation <3.5W • Built-in digital diagnostic functions • Temperature range -5°C to 70°C • SONET OC-192 / SDH STM-64 ITU-T G.959.1 P1L1-2D2 • SONET OC-192/SDH STM-64 with ITU-T G.709 • 10GBASE-ZR/ZW 80km 10G Ethernet • Extended 80km 10G Fibre Channel • 80km 10G Ethernet with ITU-T G.709 FEC Finisar’s 80km FTLX1811M3 Small Form Factor 10Gb/s XFP transceivers comply with the current XFP Multi-Source Agreement MSA Specification1. They comply with 80km SONET OC-192 and SDH STM-64 per ITU-T G.959.1 P1L1-2D2, and support 10GBASE-ZR/ZW 80km 10-Gigabit Ethernet, 10-Gigabit Fibre Channel, and 10-Gigabit Ethernet with FEC applications. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC3, and Finisar Application Note AN-20384. PRODUCT SELECTION FTLX1811M3 FTLX1811M3 XFP Product Specification February 2007 Finisar I. Pin Descriptions Pin Logic Name/Description Ref. Module Ground VEE5 Optional Power Supply Not required 3 LVTTL-I Mod-Desel Module De-select When held low allows the module to respond to 2-wire serial interface commands 4 LVTTL-O Interrupt Interrupt bar Indicates presence of an important condition 2 which can be read over the serial 2-wire interface 5 LVTTL-I TX_DIS Transmitter Disable Transmitter laser source turned off VCC5 +5 Power Supply Module Ground VCC3 +3.3V Power Supply VCC3 +3.3V Power Supply 10 LVTTL-I

PDF Datasheet Preview

Finisar

Product Specification

RoHS-6 Compliant 10Gb/s 80km Multi-Rate XFP Optical Transceiver

FTLX1811M3

PRODUCT FEATURES
• Supports 9.95Gb/s to 11.1Gb/s bit rates
• Hot-pluggable XFP footprint
• Maximum link length of 80km
• RoHS-6 compliant lead-free
• Temperature-stabilized EML
transmitter
• Duplex LC connector
• Power dissipation <3.5W
• Built-in digital diagnostic functions
• Temperature range -5°C to 70°C
• SONET OC-192 / SDH STM-64 ITU-T G.959.1 P1L1-2D2
• SONET OC-192/SDH STM-64 with ITU-T G.709
• 10GBASE-ZR/ZW 80km 10G Ethernet
• Extended 80km 10G Fibre Channel
• 80km 10G Ethernet with ITU-T G.709 FEC

Finisar’s 80km FTLX1811M3 Small Form Factor 10Gb/s XFP transceivers comply with the current XFP Multi-Source Agreement MSA Specification1. They comply with
80km SONET OC-192 and SDH STM-64 per ITU-T G.959.1 P1L1-2D2, and support
10GBASE-ZR/ZW 80km 10-Gigabit Ethernet, 10-Gigabit Fibre Channel, and 10-Gigabit

Ethernet with FEC applications. Digital diagnostics functions are available via a 2-wire
serial interface, as specified in the XFP MSA. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC3, and Finisar Application Note AN-20384.

PRODUCT SELECTION

FTLX1811M3

FTLX1811M3 XFP Product Specification February 2007

Finisar

I. Pin Descriptions

Pin Logic

Name/Description

Ref.

Module Ground

VEE5

Optional Power Supply Not required
3 LVTTL-I Mod-Desel Module De-select When held low allows the module to
respond to 2-wire serial interface commands
4 LVTTL-O

Interrupt

Interrupt bar Indicates presence of an important condition 2 which can be read over the serial 2-wire interface
5 LVTTL-I

TX_DIS Transmitter Disable Transmitter laser source turned off

VCC5 +5 Power Supply

Module Ground

VCC3 +3.3V Power Supply

VCC3 +3.3V Power Supply
10 LVTTL-I

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FTLX1811M3 Datasheet file may be downloaded here without warranties.

Datasheet ID: FTLX1811M3 635228