FTLX1671D3BTL

FTLX1671D3BTL Datasheet

10Gb/s Industrial Temperature 40km Datacom SFP+ Transceiver FTLX1671D3BTL

Part	Datasheet
FTLX1671D3BTL	FTLX1671D3BTL (pdf)

PDF Datasheet Preview
PRELIMINARY Product Specification RoHS-6 Compliant 10Gb/s Industrial Temperature 40km Datacom SFP+ Transceiver FTLX1671D3BTL PRODUCT FEATURES • Hot-pluggable SFP+ footprint • Supports to 10.3Gb/s bit rates • Power dissipation < 1.5W; Typical <1W • RoHS-6 compliant lead-free • Industrial temperature range -40°C to 85°C • Single 3.3V power supply • Maximum link length of 40km • 1550nm cooled CMLTM technology • Receiver limiting electrical interface • Duplex LC connector • Built-in digital diagnostic functions Preliminary photo shown. APPLICATIONS • 10GBASE-ER/EW 10G Ethernet Finisar’s FTLX1671D3BTL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 40km over single mode fiber. They are compliant with SFF-84311, SFF-84322 and IEEE 802.3ae 10GBASE-ER/EW3. The FTLX1671D3BTL incorporates advanced CML technology, and is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF84724. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC5, and Finisar Application Note AN-20386. PRODUCT SELECTION FTLX1671D3BTL Finisar Corporation - February 2011 FTLX1671D3BCL SFP+ ER/EW Preliminary Specification February 2011 I. Pin Descriptions Name/Description Ref. VEET Transmitter Ground TFAULT Transmitter Fault TDIS Transmitter Disable. Laser output disabled on high or open. 2-wire Serial Interface Data Line 2-wire Serial Interface Clock Line 6 MOD_ABS Module Absent. Grounded within the module Rate Select RX_LOS Loss of Signal indication. Logic 0 indicates normal operation. Rate Select VEER Receiver Ground VEER Receiver Ground Receiver Inverted DATA out. AC Coupled. Receiver Non-inverted DATA out. AC Coupled. VEER Receiver Ground VCCR Receiver Power Supply VCCT

PDF Datasheet Preview

PRELIMINARY Product Specification RoHS-6 Compliant
10Gb/s Industrial Temperature 40km Datacom SFP+ Transceiver FTLX1671D3BTL

PRODUCT FEATURES
• Hot-pluggable SFP+ footprint
• Supports to 10.3Gb/s bit rates
• Power dissipation < 1.5W;

Typical <1W
• RoHS-6 compliant lead-free
• Industrial temperature range
-40°C to 85°C
• Single 3.3V power supply
• Maximum link length of 40km
• 1550nm cooled CMLTM
technology
• Receiver limiting electrical
interface
• Duplex LC connector
• Built-in digital diagnostic functions

Preliminary photo shown.

APPLICATIONS
• 10GBASE-ER/EW 10G Ethernet

Finisar’s FTLX1671D3BTL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 40km over single mode fiber. They are compliant with SFF-84311, SFF-84322 and IEEE 802.3ae 10GBASE-ER/EW3. The FTLX1671D3BTL incorporates advanced CML technology, and is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF84724. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC5, and Finisar Application Note AN-20386.

PRODUCT SELECTION

FTLX1671D3BTL

Finisar Corporation - February 2011

FTLX1671D3BCL SFP+ ER/EW Preliminary Specification February 2011

I. Pin Descriptions

Name/Description

Ref.

VEET

Transmitter Ground

TFAULT

Transmitter Fault

TDIS

Transmitter Disable. Laser output disabled on high or open.
2-wire Serial Interface Data Line
2-wire Serial Interface Clock Line
6 MOD_ABS Module Absent. Grounded within the module

Rate Select

RX_LOS Loss of Signal indication. Logic 0 indicates normal operation.

Rate Select

VEER

Receiver Ground

VEER

Receiver Ground

Receiver Inverted DATA out. AC Coupled.

Receiver Non-inverted DATA out. AC Coupled.

VEER

Receiver Ground

VCCR

Receiver Power Supply

VCCT

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FTLX1671D3BTL Datasheet file may be downloaded here without warranties.

Datasheet ID: FTLX1671D3BTL 635227