FTLX0011D4BNL

FTLX0011D4BNL Datasheet

Laserwire XFP Adapter FTLX0011D4BNL

Part	Datasheet
FTLX0011D4BNL	FTLX0011D4BNL (pdf)

PDF Datasheet Preview
Product Specification RoHS-6 Compliant Laserwire XFP Adapter FTLX0011D4BNL PRODUCT FEATURES • Hot-pluggable XFP footprint • Supports Laserwire data rates of Gb/s to Gb/s • RoHS-6 compliant lead-free • Extended temperature range -5°C to 85°C • Single 3.3V power supply • Customizable EEPROM • Adapts Laserwire plug for XFP ports Finisar’s FTLX0011D4BNL 10Gb/s Laserwire XFP Adapters are designed for use in conjunction with Finisar’s Laserwire cables Part Numbers FCBP110LD1Lxx and FCBC110LD1Lxx . The FTLX0011D4BNL XFP Adapter allows a Laserwire cable to be plugged into an XFP port. The XFP Adapter incorporates a customizable EEPROM. The Adapter is RoHS compliant and lead free per Directive 2002/95/EC1, and Finisar Application Note AN-20382. PRODUCT SELECTION FTLX0011D4BNL FTLX0011D4BNL Laserwire XFP Adapter Product Specification July 2010 I. Background Figure 1 illustrates the application of the FTLX0011D4BNL XFP Adapter. Pin descriptions for the FTLX0011D4BNL interface to the host board are shown in Section II. Please refer to the FCBP110LD1Lxx Laserwire datasheet for details of the interface between the FTLX0011D4BNL XFP Adapter and the Laserwire cable. The Laserwire connector pin-out is also shown in Section II for reference. Laserwire FCBP110LD1Lxx XFP Adapter FTLX0011D4BNL XFP port/cage on host board Figure Top View From left to right Laserwire, XFP Adapter, XFP cage on host board. Insertion sequence 1 XFP Adapter is plugged into XFP port 2 Laserwire is plugged into Adapter. Extraction sequence 1 Depress tab on top of Laserwire plug and extract cable from Adapter 2 Pull on Adapter bail release lever and extract Adapter from host port. FTLX0011D4BNL Laserwire XFP Adapter Product Specification July 2010 II. Pin Descriptions Pin Logic 1 2 3 LVTTL-I 5 LVTTL-I 10 LVTTL-I LVTTLI/O Symbol GND VEE5 ModDesel Interrupt TX_DIS VCC5 GND VCC3 SCL SDA Name/Description per INF-8077i Module Ground Optional Power Supply Not required Module De-select When held low allows the module to respond to 2-wire serial interface commands Interrupt bar Indicates presence of an important condition which can be read over the serial 2-wire interface, NOT IMPLEMENTED Transmitter Disable Transmitter laser source turned off , NOT IMPLEMENTED. +5 Power Supply Not used. Module Ground +3.3V Power Supply +3.3V Power Supply Serial 2-wire interface clock Serial 2-wire interface data line Laserwire-Adapter Interface Connected to Laserwire VEE NC Connected to Laserwire VEE Connected to Laserwire VCC pin 5 Connected to Laserwire VCC pin 5 NC Adapter-XFP Port Interface Note Grounded in adapter Pulled high in adapter Pulled high in adapter

PDF Datasheet Preview

Product Specification RoHS-6 Compliant

Laserwire XFP Adapter FTLX0011D4BNL

PRODUCT FEATURES
• Hot-pluggable XFP footprint
• Supports Laserwire data rates
of Gb/s to Gb/s
• RoHS-6 compliant lead-free
• Extended temperature range
-5°C to 85°C
• Single 3.3V power supply
• Customizable EEPROM
• Adapts Laserwire plug for XFP ports

Finisar’s FTLX0011D4BNL 10Gb/s Laserwire XFP Adapters are designed for use in conjunction with Finisar’s Laserwire cables Part Numbers FCBP110LD1Lxx and FCBC110LD1Lxx . The FTLX0011D4BNL XFP Adapter allows a Laserwire cable to be plugged into an XFP port. The XFP Adapter incorporates a customizable EEPROM. The Adapter is RoHS compliant and lead free per Directive 2002/95/EC1, and Finisar Application Note AN-20382.

PRODUCT SELECTION

FTLX0011D4BNL

FTLX0011D4BNL Laserwire XFP Adapter Product Specification July 2010

I. Background

Figure 1 illustrates the application of the FTLX0011D4BNL XFP Adapter. Pin descriptions for the FTLX0011D4BNL interface to the host board are shown in Section II. Please refer to the FCBP110LD1Lxx Laserwire datasheet for details of the interface between the FTLX0011D4BNL XFP Adapter and the Laserwire cable. The Laserwire connector pin-out is also shown in Section II for reference.

Laserwire FCBP110LD1Lxx

XFP Adapter FTLX0011D4BNL

XFP port/cage on host board

Figure Top View From left to right Laserwire, XFP Adapter, XFP cage on host board.

Insertion sequence 1 XFP Adapter is plugged into XFP port 2 Laserwire is plugged into Adapter.

Extraction sequence 1 Depress tab on top of Laserwire plug and extract cable from Adapter 2 Pull on Adapter bail release lever and extract Adapter from host port.

FTLX0011D4BNL Laserwire XFP Adapter Product Specification July 2010

II. Pin Descriptions

Pin Logic 1 2
3 LVTTL-I
5 LVTTL-I
10 LVTTL-I

LVTTLI/O

Symbol GND VEE5 ModDesel

Interrupt

TX_DIS VCC5 GND VCC3 SCL SDA

Name/Description per INF-8077i Module Ground

Optional Power Supply Not required Module De-select When held low allows the module to respond to 2-wire serial interface
commands Interrupt bar Indicates presence of an important condition which can be read over
the serial 2-wire interface, NOT IMPLEMENTED

Transmitter Disable Transmitter laser source turned off , NOT IMPLEMENTED. +5 Power Supply Not used. Module Ground +3.3V Power Supply +3.3V Power Supply Serial 2-wire interface clock

Serial 2-wire interface data line

Laserwire-Adapter Interface Connected to Laserwire VEE

NC Connected to Laserwire VEE Connected to Laserwire VCC pin 5 Connected to Laserwire VCC pin 5 NC

Adapter-XFP Port Interface Note

Grounded in adapter

Pulled high in adapter

Pulled high in adapter

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FTLX0011D4BNL Datasheet file may be downloaded here without warranties.

Datasheet ID: FTLX0011D4BNL 635217