MV5377C

MV5377C Datasheet

MV5077C MV5477C

Part	Datasheet
MV5377C	MV5377C (pdf)

Related Parts	Information
MV5077C	MV5077C
MV5477C	MV5477C
MV5777C	MV5777C

PDF Datasheet Preview
LOW PROFILE T-1 SOLID STATE LAMPS RED DIFFUSED GREEN DIFFUSED MV5077C MV5477C PACKAGE DIMENSIONS YELLOW DIFFUSED MV5377C HER DIFFUSED MV5777C • Copper leads • Solid-state reliability ANODE SQ. TYP. 2X These solid state indicators offer a variety of color selection. The High Efficiency Red, Green and Yellow devices are made with a gallium arsenide phosphide LED on gallium phosphide substrate. All are encapsulated in epoxy packages. Their low profile, small size approximately T-1 size , good viewing angle, and small square leads contribute to their versatility as all purpose indicators. CATHODE REF FLAT 2001 Fairchild Semiconductor Corporation DS300038 12/19/01 1 OF 4 LOW PROFILE T-1 SOLID STATE LAMPS ABSOLUTE MAXIMUM RATING TA =25°C Unless Otherwise Specified Parameter Power Dissipation Derate linearly from 25°C Continuous Forward Current MV5377C Peak Forward Current - µsec pulse duty cycle VR TSOL TOPR TSTG Rating 105 35 5 -55 to +100 -55 to +100 Units mW/°C mA V sec °C °C ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C Part Number Luminous Intensity mcd Minimum Typical Forward Voltage V Typical Maximum Spectral Line Half Width nm Peak Wavelength nm Viewing Angle Total ° Symbol MV5077C MV5377C MV5477C MV5777C Condition IF = 20mA IF = 20mA IF = 20mA IF = 20mA IF = 20mA The leads of the device were immersed in molten solder at 260°C, to a point 1/16 inch mm from the body of the device per MIL-S-750, with a dwell time of 5 seconds. 2 OF 4 12/19/01 DS300038 LOW PROFILE T-1 SOLID STATE LAMPS IF - FORWARD CURRENT mA LUMNOUS INTENSITY TYPICAL PERFORMANCE CURVES TA =25°C Fig. 1 Forward Current vs. Forward Voltage 100 YELLOW 30 GREEN VF - FORWARD VOLTAGE V

PDF Datasheet Preview

LOW PROFILE T-1 SOLID STATE LAMPS

RED DIFFUSED GREEN DIFFUSED

MV5077C MV5477C

PACKAGE DIMENSIONS

YELLOW DIFFUSED MV5377C

HER DIFFUSED

MV5777C
• Copper leads
• Solid-state reliability

ANODE

SQ. TYP. 2X

These solid state indicators offer a variety of color selection. The High Efficiency Red, Green and Yellow devices are made with a gallium arsenide phosphide LED on gallium phosphide substrate. All are encapsulated in epoxy packages. Their low profile, small size approximately T-1 size , good viewing angle, and small square leads contribute to their versatility as all purpose indicators.

CATHODE REF FLAT
2001 Fairchild Semiconductor Corporation DS300038 12/19/01
1 OF 4

LOW PROFILE T-1 SOLID STATE LAMPS

ABSOLUTE MAXIMUM RATING TA =25°C Unless Otherwise Specified

Parameter Power Dissipation

Derate linearly from 25°C Continuous Forward Current MV5377C Peak Forward Current - µsec pulse duty cycle

VR TSOL TOPR TSTG

Rating 105 35
5 -55 to +100 -55 to +100

Units mW/°C mA

V sec °C °C

ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C

Part Number Luminous Intensity mcd

Minimum Typical Forward Voltage V Typical Maximum Spectral Line Half Width nm Peak Wavelength nm Viewing Angle Total °

Symbol MV5077C MV5377C

MV5477C MV5777C

Condition IF = 20mA

IF = 20mA

IF = 20mA IF = 20mA IF = 20mA

The leads of the device were immersed in molten solder at 260°C, to a point 1/16 inch mm from the body of the device per MIL-S-750, with a dwell time of 5 seconds.
2 OF 4
12/19/01 DS300038

LOW PROFILE T-1 SOLID STATE LAMPS

IF - FORWARD CURRENT mA LUMNOUS INTENSITY

TYPICAL PERFORMANCE CURVES TA =25°C

Fig. 1 Forward Current vs. Forward Voltage
100 YELLOW
30 GREEN

VF - FORWARD VOLTAGE V

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MV5377C Datasheet file may be downloaded here without warranties.

Datasheet ID: MV5377C 512790