S5U13719P00C100
S5U13719P00C100 Datasheet
S5U13719P00C100 Evaluation Board User
| Part | Datasheet |
|---|---|
S5U13719P00C100 |
S5U13719P00C100 (pdf) |
| PDF Datasheet Preview |
|---|
| S1D13719 Mobile Graphics Engine S5U13719P00C100 Evaluation Board User Manual SEIKO EPSON CORPORATION Evaluation Board/Kit and Development Tool Important Notice This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration, or development purposes only. Do not use it for other purposes. It is not intended to meet the requirements of design for finished products. This evaluation board/kit or development tool is intended for use by an electronics engineer and is not a consumer product. The user should use it properly and in a safe manner. Seiko Epson does not assume any responsibility or liability of any kind of damage and/or fire caused by the use of it. The user should cease to use it when any abnormal issue occurs even during proper and safe use. The part used for this evaluation board/kit or development tool may be changed without any notice. NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You are requested not to use, to resell, to export and/or to otherwise dispose of the products and any technical information furnished, if any for the development and/or manufacture of weapon of mass destruction or for other military purposes. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies. SEIKO EPSON CORPORATION 2007 - 2012, All rights reserved. Table of Contents Chapter 1 Introduction 5 Chapter 2 Features 6 Chapter 3 Installation and Configuration 7 Configuration DIP Switch 7 Configuration Jumpers 8 Chapter 4 Technical Description 12 Power 12 Power Requirements 12 Voltage Regulators 12 S1D13719 Power 12 Clocks 13 Reset 13 Host Interface 13 Direct Host Bus Interface Support 13 Connecting to the Epson S5U13U00P00C100 USB Adapter Board 14 LCD Panel Interface 16 Camera Interface 18 SD Card Interface 19 GPIO Connections 19 Chapter 5 Parts List 20 Chapter 6 Schematic Diagrams 23 Chapter 7 S5U13719P00C100 Board Layout 27 Chapter 8 References 29 Documents 29 Document Sources 29 Chapter 9 Change Record 30 EPSON Chapter 1 Introduction Chapter 1 Introduction This manual describes the setup and operation of the S5U13719P00C100 Evaluation Board. The evaluation board is designed as an evaluation platform for the S1D13719 Mobile Graphics Engine. The S5U13719P00C100 evaluation board can connect to the S5U13U00P00C100 USB Adapter board so that it can be used with a laptop or desktop computer, via USB The S5U13719P00C100 evaluation board can also be used with many other native platforms via the host connectors which provide the appropriate signals to support a variety of CPUs. We appreciate your comments on our documentation. Please contact us via email at Chapter 2 Features Chapter 2 Features The S5U13719P00C100 Evaluation Board includes the following features • 180-pin PFBGA S1D13719 Mobile Graphics Engine • Headers for connection to the S5U13U00P00C100 USB Adapter board • Headers for connecting to various Host Bus Interfaces • Headers for connecting to LCD panels • Headers for connecting to cameras • On-board 32.768kHz oscillator • 14-pin DIP socket if an oscillator other than 32.768kHz must be used • SD Card interface optional • 3.3V input power • On-board voltage regulators for 1.8V and for 2.7V • On-board voltage regulator with adjustable 12~25V output, 60~100mA max., to provide power for LED back- light of LCD panels. EPSON Chapter 3 Installation and Configuration Chapter 3 Installation and Configuration The S5U13719P00C100 evaluation board incorporates a DIP switch, jumpers, and 0 ohm resistors which allow it to be used with a variety of different configurations. Configuration DIP Switch The S1D13719 has configuration inputs CNF[7:0] which are read on the rising edge of RESET#. An 8-position DIP switch SW1 is used to configure the S1D13719 for multiple Host Bus Interfaces. The following figure shows the location of DIP switch SW1 on the S5U13719P00C100. Figure 3-1 Configuration DIP Switch SW1 Location Chapter 3 Installation and Configuration All S1D13719 configuration inputs CNF[7:0] are fully configurable using DIP switch SW1 as described below. S5U13719P00C100 SW1-[8:1] Config SW1-[8] SW1-[7] SW1-[6] SW1-[5:3] SW1-[2] SW1-[1] S1D13719 CNF[7:0] Config CNF7 CNF6 CNF5 CNF[4:2] |
| More datasheets: BR25005-G | BR2504-G | BR50005-G | BR50504-G | BR5010-G | BR10005-G | BR1004-G | BR1010-G | CRBV55BE-1220-2250 | AQD-D4U8GR21-HZ |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived S5U13719P00C100 Datasheet file may be downloaded here without warranties.