S5U13517P00C200

S5U13517P00C200 Datasheet

S5U13517P00C100 Evaluation Board User

Part	Datasheet
S5U13517P00C200	S5U13517P00C200 (pdf)

PDF Datasheet Preview
S1D13517 Display Controller S5U13517P00C100 Evaluation Board User Manual SEIKO EPSON CORPORATION NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of International Trade and Industry or other approval from another government agency. All other product names mentioned herein are trademarks and/or registered trademarks of their respective companies. SEIKO EPSON CORPORATION 2009, All rights reserved. S1D13517 Display Controller Table of Contents Chapter 1 Introduction 5 Chapter 2 Features 6 Chapter 3 Installation and Configuration 7 Configuration DIP Switch 7 Configuration Jumpers 8 Chapter 4 Technical Description 11 Power 11 Power Requirements 11 Voltage Regulators 11 S1D13517 Power 11 Clocks 12 Reset 12 Host Interface 13 Direct Host Bus Interface Support 13 Connecting to the Epson S5U13U00P00C100 USB Adapter Board 14 LCD Panel Interface 15 GPO and PWM Connections 16 Chapter 5 Parts Lists 17 Chapter 6 Schematic Diagrams 19 Chapter 7 Board Layout 22 Chapter 8 References 24 Documents 24 Document Sources 24 S1D13517 Display Controller EPSON S1D13517 Display Controller Chapter 1 Introduction This manual describes the setup and operation of the S5U13517P00C100 Evaluation Board. The evaluation board is designed as an evaluation platform for the S1D13517 Display Controller. The S5U13517P00C100 evaluation board can be used with many native platforms via the host connector which provides the appropriate signals to support a variety of CPUs. The S5U13517P00C100 evaluation board can also connect to the S5U13U00P00C100 USB Adapter board so that it can be used with a laptop or desktop computer, via USB We appreciate your comments on our documentation. Please contact us via email at S1D13517 Display Controller Chapter 2 Features The S5U13517P00C100 Evaluation Board includes the following features • S1D13517 Display Controller 128-pin QFP • Integrated Silicon Solution, Inc. IS42S16800E-7TLI 128M-bit SDRAM 54-pin TSOP • Header with all S1D13517 Host Bus Interface signals • Headers for connection to the S5U13U00P00C100 USB Adapter board • Headers for connecting to LCD panels • Header for S1D13517 GPO pins and PWM pin • On-board 24MHz oscillator • 14-pin DIP socket if a clock other than 24MHz must be used • 3.3V input power • On-board voltage regulator with 2.5V output • On-board voltage regulator with adjustable 6~24V output, 40mA max., to provide power for LED backlight of LCD panels. EPSON S1D13517 Display Controller Chapter 3 Installation and Configuration The S5U13517P00C100 evaluation board incorporates a DIP switch, jumpers, and 0 ohm resistors which allow it to be used with a variety of different configurations. Configuration DIP Switch The S1D13517 has 2 configuration inputs CNF[1:0] . A DIP switch SW1 is used to configure CNF[1:0] as described below. Table 3-1 Summary of Power-On/Reset Options SDU13517P00C100 SW1-[2:1] Config SW1-[1] SW1-[2] S1D13517 CNF[1:0] Config CNF0 CNF1 Power-On/Reset State 0 OFF Host data bus is 8-bit Host data bus is 16-bit Host interface is ALE bus Host interface is i80 bus = Required settings when using S5U13U00P00C100 USB Adapter board

PDF Datasheet Preview

S1D13517 Display Controller

S5U13517P00C100 Evaluation Board User

Manual

SEIKO EPSON CORPORATION

NOTICE

No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of International Trade and Industry or other approval from another government agency.

All other product names mentioned herein are trademarks and/or registered trademarks of their respective companies.

SEIKO EPSON CORPORATION 2009, All rights reserved.

S1D13517 Display Controller

Table of Contents

Chapter 1 Introduction 5 Chapter 2 Features 6 Chapter 3 Installation and Configuration 7

Configuration DIP Switch 7 Configuration Jumpers 8 Chapter 4 Technical Description 11 Power 11

Power Requirements 11 Voltage Regulators 11 S1D13517 Power 11 Clocks 12 Reset 12 Host Interface 13 Direct Host Bus Interface Support 13 Connecting to the Epson S5U13U00P00C100 USB Adapter Board 14 LCD Panel Interface 15 GPO and PWM Connections 16 Chapter 5 Parts Lists 17 Chapter 6 Schematic Diagrams 19 Chapter 7 Board Layout 22 Chapter 8 References 24 Documents 24 Document Sources 24

S1D13517 Display Controller

EPSON

S1D13517 Display Controller

Chapter 1 Introduction

This manual describes the setup and operation of the S5U13517P00C100 Evaluation Board. The evaluation board is designed as an evaluation platform for the S1D13517 Display Controller.

The S5U13517P00C100 evaluation board can be used with many native platforms via the host connector which provides the appropriate signals to support a variety of CPUs. The S5U13517P00C100 evaluation board can also connect to the S5U13U00P00C100 USB Adapter board so that it can be used with a laptop or desktop computer, via USB

We appreciate your comments on our documentation. Please contact us via email at

S1D13517 Display Controller

Chapter 2 Features

The S5U13517P00C100 Evaluation Board includes the following features
• S1D13517 Display Controller 128-pin QFP
• Integrated Silicon Solution, Inc. IS42S16800E-7TLI 128M-bit SDRAM 54-pin TSOP
• Header with all S1D13517 Host Bus Interface signals
• Headers for connection to the S5U13U00P00C100 USB Adapter board
• Headers for connecting to LCD panels
• Header for S1D13517 GPO pins and PWM pin
• On-board 24MHz oscillator
• 14-pin DIP socket if a clock other than 24MHz must be used
• 3.3V input power
• On-board voltage regulator with 2.5V output
• On-board voltage regulator with adjustable 6~24V output, 40mA max., to provide power for LED backlight of LCD panels.

EPSON

S1D13517 Display Controller

Chapter 3 Installation and Configuration

The S5U13517P00C100 evaluation board incorporates a DIP switch, jumpers, and 0 ohm resistors which allow it to be used with a variety of different configurations.

Configuration DIP Switch

The S1D13517 has 2 configuration inputs CNF[1:0] . A DIP switch SW1 is used to configure CNF[1:0] as described below.

Table 3-1 Summary of Power-On/Reset Options

SDU13517P00C100 SW1-[2:1] Config

SW1-[1] SW1-[2]

S1D13517 CNF[1:0] Config

CNF0 CNF1

Power-On/Reset State
0 OFF

Host data bus is 8-bit

Host data bus is 16-bit

Host interface is ALE bus

Host interface is i80 bus
= Required settings when using S5U13U00P00C100 USB Adapter board

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived S5U13517P00C200 Datasheet file may be downloaded here without warranties.

Datasheet ID: S5U13517P00C200 511880