B88069X6181T103

B88069X6181T103 Datasheet

ES600XSN B88069X6181xxxx a

Part	Datasheet
B88069X6181T103	B88069X6181T103 (pdf)

PDF Datasheet Preview
Surge arrester 2-electrode arrester Series/Type Ordering code: Version/Date Version: ES600XSN B88069X6181xxxx a Issue 01 / 2006-08-31 6 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the colour to "white" or invisible . This ensures that the table disappears for the customer PDF. To update the data sheet, click on the symbol "Preview" and then "Close". Please do not alter the header or footer when copying the content. Identification/Classification 1 header 1 + top left header bar Surge arrester Identification/Classification 2 header 2 + bottom left header bar Ordering code top right header bar 2-electrode arrester B88069X6181xxxx a Series/Type top right header bar ES600XSN Preliminary data optional if necessary Department: KB AB E / KB AB PM Date: Issue 01 / 2006-08-31 EPCOS AG Reproduction, publication and dissemination of this document, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Surge arrester 2-electrode arrester B88069X6181xxxx a ES600XSN Extremely small size Extremely fast response time Stable performance over life Extremely low capacitance High insulation resistance RoHS-compatible Modem Consumer electronics Tuner Electrical specifications DC spark-over voltage 1 2 3 Impulse spark-over voltage at 100 V/µs - for 99 % of measured values - typical values of distribution at 1 kV/µs - for 99 % of measured values - typical values of distribution Single impulse discharge current wave 8/20 µs Insulation resistance at 100 Vdc Capacitance at 1 MHz Weight Operation and storage temperature Climatic category IEC 60068-1 Marking, red positive a xxxx = T103 1000 pcs. on SMD-tape C253 2500 pcs in container 1 At delivery AQL level II, DIN ISO 2859 2 In ionized mode 3 The first DC spark-over value immediately after changing polarity shall not be considered. Terms in accordance with ITU-T Rec. K.12 and DIN 57845/VDE0845 510 750 < 800 < 750 < 900 < 800 -40 +90 40/ 90/ 21 ES 600 YY O - Series 600 - Nominal voltage - Year of production - Non radioactive KB AB E / KB AB PM Please read Cautions and warnings and Important notes at the end of this document. Issue 01 / 2006-08-31 Surge arrester 2-electrode arrester Dimensional drawing B88069X6181xxxx a ES600XSN Not to scale Dimensions in mm Non controlled document Cautions and warnings Surge arresters must not be operated directly in power supply networks. Surge arresters may become hot in case of longer periods of current stress danger of burning . Surge arresters may be used only within their specified values. In case of overload, the head

PDF Datasheet Preview

Surge arrester
2-electrode arrester
Series/Type Ordering code:

Version/Date Version:

ES600XSN B88069X6181xxxx a

Issue 01 / 2006-08-31 6

Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the colour to "white" or invisible . This ensures that the table disappears for the customer PDF. To update the data sheet, click on the symbol "Preview" and then "Close". Please do not alter the header or footer when copying the content.

Identification/Classification 1 header 1 + top left header bar

Surge arrester

Identification/Classification 2 header 2 + bottom left header bar
Ordering code top right header bar
2-electrode arrester B88069X6181xxxx a

Series/Type top right header bar

ES600XSN

Preliminary data optional if necessary

Department:

KB AB E / KB AB PM

Date:

Issue 01 / 2006-08-31

EPCOS AG Reproduction, publication and dissemination of this document, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

Surge arrester 2-electrode arrester

B88069X6181xxxx a ES600XSN

Extremely small size Extremely fast response time Stable performance over life Extremely low capacitance High insulation resistance RoHS-compatible

Modem Consumer electronics Tuner

Electrical specifications DC spark-over voltage 1 2 3

Impulse spark-over voltage at 100 V/µs - for 99 % of measured values - typical values of distribution at 1 kV/µs - for 99 % of measured values - typical values of distribution

Single impulse discharge current wave 8/20 µs Insulation resistance at 100 Vdc Capacitance at 1 MHz Weight Operation and storage temperature Climatic category IEC 60068-1 Marking, red positive
a xxxx = T103 1000 pcs. on SMD-tape C253 2500 pcs in container
1 At delivery AQL level II, DIN ISO 2859 2 In ionized mode 3 The first DC spark-over value immediately after changing polarity
shall not be considered. Terms in accordance with ITU-T Rec. K.12 and DIN 57845/VDE0845
510 750
< 800
< 750
< 900
< 800
-40 +90
40/ 90/ 21

ES 600 YY O
- Series
600 - Nominal voltage
- Year of production
- Non radioactive

KB AB E / KB AB PM

Please read Cautions and warnings and Important notes at the end of this document.

Issue 01 / 2006-08-31

Surge arrester 2-electrode arrester

Dimensional drawing

B88069X6181xxxx a ES600XSN

Not to scale Dimensions in mm Non controlled document

Cautions and warnings

Surge arresters must not be operated directly in power supply networks. Surge arresters may become hot in case of longer periods of current stress danger of burning . Surge arresters may be used only within their specified values. In case of overload, the head

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B88069X6181T103 Datasheet file may be downloaded here without warranties.

Datasheet ID: B88069X6181T103 511772