B84102C20

B84102C20 Datasheet

B84102C

Part	Datasheet
B84102C20	B84102C20 (pdf)

PDF Datasheet Preview
EMC Filters Series/Type: B84102C The following products presented in this data sheet are being withdrawn. Ordering Code B84102C0050* B84102C0040* B84102C0030* Substitute Product Date of Withdrawal 2013-04-12 2013-04-12 2013-04-12 Deadline Last Orders 2013-07-31 2013-07-31 2013-07-31 Last Shipments 2013-10-31 2013-10-31 2013-10-31 EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Ordering Code B84102C0020* Substitute Product Date of Withdrawal 2013-04-12 Deadline Last Orders 2013-07-31 Last Shipments 2013-10-31 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at 2-line filters for general-purpose applications Power line filters for 1-phase systems Rated voltage 250 V DC/AC, 50/60 Hz Rated current to 4 A Construction • Plastic case • Filter comprises current-compensated choke • High insertion loss Applications • Industrial equipment and small-size systems • DC applications Terminals • Finger-safe terminal blocks Marking on component Manufacturer’s logo, ordering code, rated voltage, rated current, rated temperature, climatic category, date code Minimum marking on packaging Manufacturer’s logo, ordering code Circuit diagram LINE LOAD L’ N’ SSB2218-6 Please read Cautions and warnings and Important notes at the end of this document. 2 01/06 B84102C 2-line filters for general-purpose applications B84102C Technical data and measuring conditions Rated voltage VR Rated current IR Test voltage Vtest Leakage current Ileak Climatic category IEC 60068-1 Weight 250 V DC/AC, 50/60 Hz Referred to 40 °C ambient temperature 1650 V DC, 2 s line/line 2700 V DC, 2 s lines/ground At 230 V AC, 50 Hz 25/085/21 °C/+85 °C/21 days damp heat test Approx. 250 g Characteristics and ordering codes AC/DC lleak µF X1 + 2 x 2200 pF Y2 2 x mH, 2 x 14 µH 2 x mH, 2 x 8 µH 2 x mH, 2 x 2 µH 2 x 220 µH, 2 x 1 µH mA < < < < Ordering code B84102C0020 B84102C0030 B84102C0040 B84102C0050 Dimensional drawing 32 max. PE M4 Terminal blocks mm 2 Tightening torque Nm LINE Marking SSB1066-8-E Please read Cautions and warnings and Important notes at the end of this document. 3 01/06 2-line filters for general-purpose applications Insertion loss typical values at Z = 50 unsymmetrical, adjacent branches terminated differential mode symmetrical Filters for A 100 dB B84102C0020 α 80 SSB2108-S Filters for 1 A 100 dB B84102C0030 α 80 Filters for 2 A 100 dB B84102C0040 α 80 10 7 Hz 10 8 f SSB2110-4 Filters for 4 A 100 dB B84102C0050 α 80 10 7 Hz 10 8 Please read Cautions and warnings and Important notes at the end of this document. 4 01/06 B84102C SSB2109-1 10 7 Hz 10 8 f SSB2111-C 10 7 Hz 10 8 f EMC filters Cautions and warnings Important information Please read all safety and warning notes carefully before installing the EMC filter and putting it into operation see The same applies to the warning signs on the filter. Please ensure that the signs are not removed nor their legibility impaired by external influences. Death, serious bodily injury and substantial material damage to equipment may occur if the priate safety measures are not carried out or the warnings in the text are not observed. Using according to the terms The EMC filters may be used only for their intended application within the specified values in voltage networks in compliance with the instructions given in the data sheets and the data book. The conditions at the place of application must comply with all specifications for the filter used.

PDF Datasheet Preview

EMC Filters

Series/Type:

B84102C

The following products presented in this data sheet are being withdrawn.
Ordering Code

B84102C0050* B84102C0040* B84102C0030*

Substitute Product

Date of Withdrawal
2013-04-12
2013-04-12
2013-04-12

Deadline Last Orders
2013-07-31
2013-07-31
2013-07-31

Last Shipments
2013-10-31 2013-10-31 2013-10-31

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.
Ordering Code B84102C0020*

Substitute Product

Date of Withdrawal
2013-04-12

Deadline Last Orders
2013-07-31

Last Shipments 2013-10-31

For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at
2-line filters for general-purpose applications

Power line filters for 1-phase systems Rated voltage 250 V DC/AC, 50/60 Hz Rated current to 4 A

Construction
• Plastic case
• Filter comprises current-compensated choke
• High insertion loss

Applications
• Industrial equipment and small-size systems
• DC applications

Terminals
• Finger-safe terminal blocks
Marking on component Manufacturer’s logo, ordering code, rated voltage, rated current, rated temperature, climatic category, date code Minimum marking on packaging Manufacturer’s logo, ordering code

Circuit diagram

LINE

LOAD

L’

N’

SSB2218-6

Please read Cautions and warnings and

Important notes at the end of this document.
2 01/06

B84102C
2-line filters for general-purpose applications

B84102C

Technical data and measuring conditions

Rated voltage VR Rated current IR Test voltage Vtest

Leakage current Ileak Climatic category IEC 60068-1 Weight
250 V DC/AC, 50/60 Hz Referred to 40 °C ambient temperature 1650 V DC, 2 s line/line 2700 V DC, 2 s lines/ground At 230 V AC, 50 Hz 25/085/21 °C/+85 °C/21 days damp heat test Approx. 250 g
Characteristics and ordering codes

AC/DC
lleak
µF X1 + 2 x 2200 pF Y2
2 x mH, 2 x 14 µH 2 x mH, 2 x 8 µH 2 x mH, 2 x 2 µH 2 x 220 µH, 2 x 1 µH
mA < < < <
Ordering code

B84102C0020 B84102C0030 B84102C0040 B84102C0050

Dimensional drawing
32 max.

PE M4

Terminal blocks mm 2 Tightening torque Nm

LINE

Marking

SSB1066-8-E

Please read Cautions and warnings and

Important notes at the end of this document.
3 01/06
2-line filters for general-purpose applications

Insertion loss typical values at Z = 50
unsymmetrical, adjacent branches terminated differential mode symmetrical

Filters for A
100 dB B84102C0020
α 80

SSB2108-S

Filters for 1 A
100 dB B84102C0030
α 80

Filters for 2 A
100 dB B84102C0040
α 80
10 7 Hz 10 8 f

SSB2110-4

Filters for 4 A
100 dB B84102C0050
α 80
10 7 Hz 10 8

Please read Cautions and warnings and

Important notes at the end of this document.
4 01/06

B84102C

SSB2109-1
10 7 Hz 10 8 f

SSB2111-C
10 7 Hz 10 8 f

EMC filters Cautions and warnings

Important information Please read all safety and warning notes carefully before installing the EMC filter and putting it into operation see The same applies to the warning signs on the filter. Please ensure that the signs are not removed nor their legibility impaired by external influences. Death, serious bodily injury and substantial material damage to equipment may occur if the priate safety measures are not carried out or the warnings in the text are not observed. Using according to the terms The EMC filters may be used only for their intended application within the specified values in voltage networks in compliance with the instructions given in the data sheets and the data book. The conditions at the place of application must comply with all specifications for the filter used.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B84102C20 Datasheet file may be downloaded here without warranties.

Datasheet ID: B84102C20 511695