B59346A1502P20

B59346A1502P20 Datasheet

Series/Type B593*

Part	Datasheet
B59346A1502P20	B59346A1502P20 (pdf)

PDF Datasheet Preview
PTC thermistors for switching applications Plastic case, 230 V Series/Type B593* The following products presented in this data sheet are being withdrawn. Ordering Code B59346A1502P020 Substitute Product Date of Withdrawal Deadline Last Orders 2012-12-21 2013-04-01 Last Shipments 2013-07-01 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Switching applications PTC thermistors in plastic case, 230 V Applications Delayed switching of loads For frequent switching Starting resistance in switch-mode power supplies Features Encased thermistor disk with clamp contacts Flame-retardant plastic case material UL-listed Silver-plated lead-free solder pins Manufacturer's logo and type designation stamped on in white Stable performance throughout 100 000 switching cycles RoHS-compatible Delivery mode Packed in blister trays General technical data Dimensional drawing Dimensions in mm Switching cycles Tolerance of RR Operating temperature range Operating temperature range V = 0 V = Vmax N Top ±25 0/+60 Electrical specifications and ordering codes Type RR Rmin IR ISmax Tref Ordering code V = Vmax V = Vmax ISmax typ. Vmax = 265 V, VR = 230 V J286 500 260 20 40 J289 2000 900 10 20 J29 5000 2000 14 30 J29 5000 3200 7 15 120 B59339A1501P020 120 B59339A1202P020 190 B59346A1502P020 115 B59339A1502P020 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 11 Switching applications PTC thermistors in plastic case, 230 V Reliability data Test Electrical endurance, cycling Electrical endurance, constant Damp heat Standard IEC 60738-1 IEC 60738-1 IEC 60738-1 Rapid change of temperature Vibration IEC 60738-1 IEC 60738-1 Shock Climatic sequence IEC 60738-1 IEC 60738-1 Test conditions Room temperature, ISmax Vmax Number of cycles 50 000 Storage at Vmax /Top,max Vmax Test duration 1000 h Temperature of air 40 °C Relative humidity of air 93% Duration 56 days Test according to IEC 60068-2-78 T1 = Top,min 0 V , T2 = Top,max 0 V Number of cycles 5 Test duration 30 min Test according to IEC 60068-2-14, test Na Frequency range 10 to 55 Hz Displacement amplitude mm Test duration 3 x 2 h Test according to IEC 60068-2-6, test Fc Acceleration 390 m/s2 Pulse duration 6 ms 6 x 4000 pulses Dry heat T = Top,max 0 V Test duration 16 h Damp heat first cycle Cold T = Top,min 0 V Test duration 2 h Damp heat 5 cycles Tests performed according to IEC 60068-2-30 < 25% < 25% < 10% < 10% < 5% < 10% Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 11 Switching applications PTC thermistors in plastic case, 230 V Characteristics typical PTC resistance RPTC versus PTC temperature TPTC measured at low signal voltage PTC current IPTC versus PTC voltage VPTC measured at 25 °C in still air Switching time tS versus switching current IS measured at 25 °C in still air Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 11 Switching applications PTC thermistors in plastic case, 230 V Characteristics typical PTC resistance RPTC versus PTC temperature TPTC measured at low signal voltage Surface-mount devices * To be replaced by a number in ordering codes, type designations etc. + To be replaced by a letter All dimensions are given in mm. The commas used in numerical values denote decimal points. Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 11 Important notes The following applies to all products named in this publication: Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health e.g. in accident prevention or lifesaving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as hazardous . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association ZVEI . The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at Page 11 of 11

PDF Datasheet Preview

PTC thermistors for switching applications

Plastic case, 230 V

Series/Type B593*

The following products presented in this data sheet are being withdrawn.
Ordering Code B59346A1502P020

Substitute Product

Date of Withdrawal Deadline Last Orders
2012-12-21
2013-04-01

Last Shipments 2013-07-01

For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

Switching applications PTC thermistors in plastic case, 230 V

Applications Delayed switching of loads For frequent switching Starting resistance in switch-mode power supplies

Features Encased thermistor disk with clamp contacts Flame-retardant plastic case material UL-listed Silver-plated lead-free solder pins Manufacturer's logo and type designation stamped on in white Stable performance throughout 100 000 switching cycles RoHS-compatible

Delivery mode Packed in blister trays

General technical data

Dimensional drawing Dimensions in mm

Switching cycles Tolerance of RR Operating temperature range Operating temperature range

V = 0 V = Vmax

N Top
±25
0/+60
Electrical specifications and ordering codes

Type RR

Rmin IR

ISmax
Tref Ordering code

V = Vmax V = Vmax ISmax typ.

Vmax = 265 V, VR = 230 V

J286 500 260 20 40

J289 2000 900 10 20

J29 5000 2000 14 30

J29 5000 3200 7 15
120 B59339A1501P020 120 B59339A1202P020 190 B59346A1502P020 115 B59339A1502P020

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 11

Switching applications PTC thermistors in plastic case, 230 V

Reliability data

Test Electrical endurance, cycling Electrical endurance, constant Damp heat

Standard IEC 60738-1

IEC 60738-1

IEC 60738-1

Rapid change of temperature

Vibration

IEC 60738-1 IEC 60738-1

Shock Climatic sequence

IEC 60738-1 IEC 60738-1

Test conditions

Room temperature, ISmax Vmax Number of cycles 50 000

Storage at Vmax /Top,max Vmax Test duration 1000 h

Temperature of air 40 °C Relative humidity of air 93% Duration 56 days Test according to IEC 60068-2-78

T1 = Top,min 0 V , T2 = Top,max 0 V Number of cycles 5 Test duration 30 min Test according to IEC 60068-2-14, test Na

Frequency range 10 to 55 Hz Displacement amplitude mm Test duration 3 x 2 h Test according to IEC 60068-2-6, test Fc

Acceleration 390 m/s2 Pulse duration 6 ms 6 x 4000 pulses Dry heat T = Top,max 0 V Test duration 16 h Damp heat first cycle Cold T = Top,min 0 V Test duration 2 h Damp heat 5 cycles Tests performed according to IEC 60068-2-30
< 25% < 25% < 10%
< 10%
< 5% < 10%

Please read Cautions and warnings and Important notes at the end of this document.

Page 3 of 11

Switching applications PTC thermistors in plastic case, 230 V

Characteristics typical PTC resistance RPTC versus PTC temperature TPTC measured at low signal voltage

PTC current IPTC versus PTC voltage VPTC measured at 25 °C in still air

Switching time tS versus switching current IS measured at 25 °C in still air

Please read Cautions and warnings and Important notes at the end of this document.

Page 4 of 11

Switching applications PTC thermistors in plastic case, 230 V

Characteristics typical PTC resistance RPTC versus PTC temperature TPTC measured at low signal voltage
Surface-mount devices * To be replaced by a number in ordering codes, type designations etc. + To be replaced by a letter All dimensions are given in mm. The commas used in numerical values denote decimal points.

Please read Cautions and warnings and Important notes at the end of this document.

Page 10 of 11

Important notes

The following applies to all products named in this publication:

Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.

We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health e.g. in accident prevention or lifesaving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component.

The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as hazardous . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association ZVEI . The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at

Page 11 of 11

More datasheets: CY3250-24X94 | CY8C24994-24LFXI | CY8C24994-24LFXIT | 5988550207F | 5988530207F | 5988580207F | 5988570207F | M3289 SL002 | M3289 SL005 | M3289 SL001

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B59346A1502P20 Datasheet file may be downloaded here without warranties.

Datasheet ID: B59346A1502P20 511535