B43888P2686M000

B43888P2686M000 Datasheet

B43888 December 2006

Part	Datasheet
B43888P2686M000	B43888P2686M000 (pdf)

Related Parts	Information
B43888A1226M000	B43888A1226M000
B43888A9476M000	B43888A9476M000
B43888P2476M000	B43888P2476M000
B43888F9476M000	B43888F9476M000
B43888F4476M000	B43888F4476M000
B43888K2107M000	B43888K2107M000
B43888P2107M000	B43888P2107M000
B43888F1107M000	B43888F1107M000
B43888A2106M000	B43888A2106M000
B43888A5336M000	B43888A5336M000
B43888A4476M000	B43888A4476M000
B43888A9685M000	B43888A9685M000
B43888A4685M000	B43888A4685M000
B43888A1106M000	B43888A1106M000
B43888A4686M000	B43888A4686M000
B43888A4106M000	B43888A4106M000
B43888A9106M000	B43888A9106M000
B43888F1686M000	B43888F1686M000
B43888F2476M000	B43888F2476M000
B43888A2686M000	B43888A2686M000
B43888A4226M000	B43888A4226M000
B43888A1686M000	B43888A1686M000
B43888F2106M000	B43888F2106M000
B43888A1336M000	B43888A1336M000
B43888A4336M000	B43888A4336M000
B43888F2336M000	B43888F2336M000
B43888A9686M000	B43888A9686M000
B43888A5106M000	B43888A5106M000
B43888F2226M000	B43888F2226M000
B43888K2686M000	B43888K2686M000
B43888A9226M000	B43888A9226M000
B43888A5476M000	B43888A5476M000
B43888F2107M000	B43888F2107M000
B43888A1107M000	B43888A1107M000
B43888A9336M000	B43888A9336M000
B43888F2686M000	B43888F2686M000
B43888A2107M000	B43888A2107M000
B43888A5226M000	B43888A5226M000
B43888F5226M000	B43888F5226M000

PDF Datasheet Preview
Aluminum electrolytic capacitors Single-ended capacitors Series/Type Date: B43888 December 2006 EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Single-ended capacitors Very long useful life 105 °C Long-life grade capacitors Applications Professional electronic ballasts Power supplies Energy-saving lamps Features Compact dimensions High ripple current capability at high frequency Very long useful life 8000 to 10000 h / 105 °C Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve Case with safety vent Delivery mode Special terminal configurations and packing: Refer to chapter "Single-ended capacitors Taping, packing and lead configurations" for further details and ordering example. B43888 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 24 B43888 Very long useful life 105 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan 20 °C, 120 Hz Leakage current Ileak 20 °C, 5 min 160 450 V DC VR 100 µF ±20% M VR 350 V DC tan = VR 400 V DC tan = Self-inductance ESL Diameter mm ESL nH Useful life 105 °C, VR, IAC,R 105 °C, VR, IAC,R 8000 h for d = 10 mm 10000 h for d mm Requirements Voltage endurance test 105 °C, VR tan Ileak ±50% of initial value 3 times initial specified limit initial specified limit 8000 h for d = 10 mm 10000 h for d mm Post test requirements Vibration resistance test IEC climatic category Sectional specification ±25% of initial value tan 2 times initial specified limit Ileak initial specified limit To IEC 60068-2-6, test Fc: Displacement amplitude mm, frequency range 10 2000 Hz, acceleration max. 20 g, duration 3 x 2 h. Capacitor rigidly clamped by the aluminum case. To IEC 60068-1: VR 250 V 40/105/56 °C/+105 °C/56 days damp heat test VR 350 V 25/105/56 °C/+105 °C/56 days damp heat test IEC 60384-4 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 24 B43888 Very long useful life 105 °C Dimensional drawings With stand-off rubber seal Diameters mm 10, 16, 18 With flat rubber seal Diameter mm 20 Dimensions and weights Technical data and ordering codes Case 120 Hz dimensions 20 °C d x l VR = 160 V DC 10 x 16 10 x 20 10 x 20 16 x 20 16 x 25 20 x 20 VR = 200 V DC 10 x 16 10 x 20 16 x 20 16 x 25 20 x 20 VR = 250 V DC 10 x 20 16 x 20 16 x 25 20 x 20 20 x 20 ESRmax 120 Hz °C 1161 528 352 247 171 116 1161 528 352 247 171 116 1161 528 352 247 171 116 ESRmax 120 Hz 20 °C Zmax 100 kHz 20 °C IAC,R 100 kHz 105 °C mA IAC,max 100 kHz 85 °C mA Ordering code composition see beolow 374 B43888A1106M* 595 B43888A1226M* 731 B43888A1336M* 986 B43888A1476M* 770 1309 B43888A1686M* 820 1394 B43888F1686M* 1080 1836 B43888A1107M* 1150 1955 B43888F1107M* 374 B43888A2106M* 595 B43888A2226M* 833 B43888A2336M* 986 B43888A2476M* 770 1309 B43888A2686M* 820 1394 B43888K2686M* 1080 1836 B43888A2107M* 1150 1955 B43888K2107M* 408 B43888F2106M* 680 B43888F2226M* 833 B43888F2336M* 640 1088 B43888F2476M* 680 1156 B43888P2476M* 890 1513 B43888F2686M* 950 1615 B43888P2686M* 1180 2006 B43888F2107M* 1150 1955 B43888P2107M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk for 10 mm 002 = for cut leads, bulk for 10 mm 003 = for crimped leads, blister for 16 mm 004 = for J leads, blister from d x l = 10 x 16 mm to 18 x mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 10 x 16 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 16 x 20 mm to 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 24 B43888 Very long useful life 105 °C Technical data and ordering codes Case 120 Hz dimensions 20 °C d x l VR = 350 V DC 10 x 16 10 x 20 16 x 20 20 x 20 VR = 400 V DC 10 x 16 10 x 20 16 x 25 20 x 20 VR = 450 V DC 10 x 20 16 x 25 18 x 20 ESRmax 120 Hz °C 1707 1161 528 352 247 171 2048 1393 633 422 296 205 2048 1393 633 422 296 ESRmax 120 Hz 20 °C Zmax 100 kHz 20 °C IAC,R 100 kHz 105 °C mA IAC,max 100 kHz 85 °C mA Ordering code composition see beolow 306 B43888A4685M* 408 B43888A4106M* 748 B43888A4226M* 969 B43888A4336M* 810 1377 B43888A4476M* 790 1343 B43888F4476M* 1040 1768 B43888A4686M* 306 B43888A9685M* 408 B43888A9106M* 748 B43888A9226M* 620 1054 B43888A9336M* 810 1377 B43888A9476M* 790 1343 B43888F9476M* 1040 1768 B43888A9686M* 340 B43888A5685M* 459 B43888A5106M* 867 B43888A5226M* 850 B43888F5226M* 680 1156 B43888A5336M* 870 1479 B43888A5476M* Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk for 10 mm 002 = for cut leads, bulk for 10 mm 003 = for crimped leads, blister for 16 mm 004 = for J leads, blister from d x l = 10 x 16 mm to 18 x mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 10 x 16 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 16 x 20 mm to 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 24 B43888 Very long useful life 105 °C Useful life depending on ambient temperature TA under ripple current operating conditions1 VR = 160 450 V DC Frequency factor of permissible ripple current IAC versus frequency f 1 Refer to chapter "General technical information, Calculation of useful life" for an explanation on how to interpret the useful life graphs. Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 24 B43888 Very long useful life 105 °C Taping, packing and lead configurations Taping Single-ended capacitors are available taped in Ammo pack from diameter 5 to 18 mm as follows Lead spacing F = mm d = 5 mm Lead spacing F = mm d = 8 mm Lead spacing F = mm d = 5 mm Lead spacing F = mm d = 16 18 mm . Lead spacing mm d = 5 mm Last 3 digits of ordering code 007 Dimensions in mm W W0 W1 W2 H0 P P0 P1 I1 Toler- ance min. max. max. max. Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 24 B43888 Very long useful life 105 °C Lead spacing mm d = 8 mm Last 3 digits of ordering code 006 Dimensions in mm W0 W1 W2 P Toler- ance min. max. max. max. Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 24 Lead spacing mm d = 5 8 mm Last 3 digits of ordering code 008 B43888 Very long useful life 105 °C Lead spacing mm d = 10 mm Last 3 digits of ordering code 008 Dimensions in mm 8 10 Toler- ance W W0 W1 W2 min. max. max. max. Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 24 B43888 Very long useful life 105 °C Lead spacing mm d = 16 mm Last 3 digits of ordering code 009 Dimensions in mm W0 W1 W2 P Tolerance min. max. max. * Available only for case dimensions 18 x 20, 18 x 25 and 18 x mm Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 24 Packing units and box dimensions Ammo pack B43888 Very long useful life 105 °C Case size dxl mm 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 25 x 30 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x Dimensions mm Amax 345 Bmax 55 Cmax 240 345 55 290 345 55 240 345 55 280 345 60 200 345 60 200 345 65 280 345 65 280 345 65 280 345 65 275 315 65 275 315 65 275 315 65 275 315 65 275 315 65 275 315 65 275 Packing units pcs. 2000 1000 750 500 300 250 Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 24 B43888 Very long useful life 105 °C Kinked or cut leads Single-ended capacitors are available with kinked or cut leads. Other lead configurations also available upon request. Kinked leads Last 3 digits of ordering code 001 With stand-off rubber seal With flat rubber seal Case size d x l mm 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 40 22 x 30 22 x 35 22 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 24 Cut leads Last 3 digits of ordering code 002 With stand-off rubber seal With flat rubber seal B43888 Very long useful life 105 °C Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 24 B43888 Very long useful life 105 °C These lead configurations ensure correct placement of the capacitor on the PCB with regard to polarity. PAPR leads are available for diameters from 10 mm up to 20 mm. There are three configurations available Crimped leads, J leads, bent 90° leads Crimped leads Last 3 digits of ordering code 003 With stand-off rubber seal With flat rubber seal Suggestion for PCB hole diameter Case size d x l mm 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 40 Dimensions mm Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 24 J leads Last 3 digits of ordering code 004 B43888 Very long useful life 105 °C Suggestion for PCB hole diameter Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 Dimensions mm Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 24 B43888 Very long useful life 105 °C Bent 90° leads for horizontal mounting pinning Last 3 digits of ordering code 012 Case size d x l mm 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm Bent leads for diameter mm available upon request. Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 24 B43888 Very long useful life 105 °C Overview of packing units and code numbers for case sizes 5 x 11 16 x Case size dxl mm 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 2000 2500 1000 100 500 350 250 200 175 250 200 000 Taped, Ammo pack pcs. 2000 2000 1000 Code F mm d mm 006 007 008 5 009 Kinked leads, bulk pcs. 500 350 500 175 200 250 001 PAPR Cut Crimped J leads Bent 90° leads, leads leads, bulk blister pcs. pcs. pcs. pcs. 1000 1000 200 120 200 120 250 344 344 120 002 003 004 012 1 Available upon request Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 24 B43888 Very long useful life 105 °C Overview of packing units and code numbers for case sizes 18 x 20 25 x 40 Case size dxl mm 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 30 20 x 35 20 x 40 22 x 30 22 x 35 22 x 40 25 x 40 The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 175 150 100 125 100 80 40 000 Taped, Kinked Ammo pack leads, bulk pcs. pcs. Code F mm d mm 001 007 008 5 009 PAPR Cut Crimped J leads Bent 90° leads, leads leads, bulk blister pcs. pcs. pcs. pcs. 175 200 200 120 150 200 200 120 100 150 150 120 100 150 100 120 125 200 125 200 100 120 100 120 100 120 002 003 004 012 Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 24 B43888 Very long useful life 105 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC . Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling Al electrolytic capacitors: Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water.

PDF Datasheet Preview

Aluminum electrolytic capacitors

Single-ended capacitors

Series/Type Date:

B43888 December 2006

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

Single-ended capacitors Very long useful life 105 °C

Long-life grade capacitors

Applications Professional electronic ballasts Power supplies Energy-saving lamps

Features Compact dimensions High ripple current capability at high frequency Very long useful life 8000 to 10000 h / 105 °C

Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve Case with safety vent

Delivery mode Special terminal configurations and packing:
Refer to chapter "Single-ended capacitors Taping, packing and lead configurations" for further details and ordering example.

B43888

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 24

B43888 Very long useful life 105 °C

Specifications and characteristics in brief

Rated voltage VR Surge voltage VS

Rated capacitance CR Capacitance tolerance

Dissipation factor tan 20 °C, 120 Hz

Leakage current Ileak 20 °C, 5 min
160 450 V DC VR 100 µF ±20% M VR 350 V DC tan = VR 400 V DC tan =

Self-inductance ESL

Diameter mm

ESL nH

Useful life
105 °C, VR, IAC,R 105 °C, VR, IAC,R
8000 h for d = 10 mm 10000 h for d mm

Requirements

Voltage endurance test 105 °C, VR
tan Ileak
±50% of initial value 3 times initial specified limit initial specified limit
8000 h for d = 10 mm 10000 h for d mm

Post test requirements Vibration resistance test IEC climatic category Sectional specification
±25% of initial value
tan 2 times initial specified limit

Ileak
initial specified limit

To IEC 60068-2-6, test Fc:

Displacement amplitude mm, frequency range 10 2000 Hz,
acceleration max. 20 g, duration 3 x 2 h.

Capacitor rigidly clamped by the aluminum case.

To IEC 60068-1:

VR 250 V 40/105/56 °C/+105 °C/56 days damp heat test VR 350 V 25/105/56 °C/+105 °C/56 days damp heat test

IEC 60384-4

Please read Cautions and warnings and Important notes at the end of this document.

Page 3 of 24

B43888 Very long useful life 105 °C

Dimensional drawings

With stand-off rubber seal Diameters mm 10, 16, 18

With flat rubber seal Diameter mm 20

Dimensions and weights
Technical data and ordering codes

Case
120 Hz dimensions
20 °C d x l

VR = 160 V DC
10 x 16
10 x 20
10 x 20
16 x 20
16 x 25
20 x 20

VR = 200 V DC
10 x 16
10 x 20
16 x 20
16 x 25
20 x 20

VR = 250 V DC
10 x 20
16 x 20
16 x 25
20 x 20
20 x 20

ESRmax 120 Hz °C
1161 528 352 247 171 116
1161 528 352 247 171 116
1161 528 352 247 171 116

ESRmax 120 Hz 20 °C

Zmax 100 kHz 20 °C

IAC,R 100 kHz 105 °C mA

IAC,max 100 kHz 85 °C mA
Ordering code composition see beolow
374 B43888A1106M***
595 B43888A1226M***
731 B43888A1336M***
986 B43888A1476M***
770 1309 B43888A1686M***
820 1394 B43888F1686M***
1080 1836 B43888A1107M***
1150 1955 B43888F1107M***
374 B43888A2106M***
595 B43888A2226M***
833 B43888A2336M***
986 B43888A2476M***
770 1309 B43888A2686M***
820 1394 B43888K2686M***
1080 1836 B43888A2107M***
1150 1955 B43888K2107M***
408 B43888F2106M***
680 B43888F2226M***
833 B43888F2336M***
640 1088 B43888F2476M***
680 1156 B43888P2476M***
890 1513 B43888F2686M***
950 1615 B43888P2686M***
1180 2006 B43888F2107M***
1150 1955 B43888P2107M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk for 10 mm 002 = for cut leads, bulk for 10 mm 003 = for crimped leads, blister for 16 mm 004 = for J leads, blister from d x l = 10 x 16 mm to 18 x mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 10 x 16 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 16 x 20 mm to 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 6 of 24

B43888 Very long useful life 105 °C
Technical data and ordering codes

Case
120 Hz dimensions
20 °C d x l

VR = 350 V DC
10 x 16
10 x 20
16 x 20
20 x 20

VR = 400 V DC
10 x 16
10 x 20
16 x 25
20 x 20

VR = 450 V DC
10 x 20
16 x 25
18 x 20

ESRmax 120 Hz °C
1707 1161
528 352 247 171
2048 1393
633 422 296 205
2048 1393
633 422 296

ESRmax 120 Hz 20 °C

Zmax 100 kHz 20 °C

IAC,R 100 kHz 105 °C mA

IAC,max 100 kHz 85 °C mA
Ordering code composition see beolow
306 B43888A4685M***
408 B43888A4106M***
748 B43888A4226M***
969 B43888A4336M***
810 1377 B43888A4476M***
790 1343 B43888F4476M***
1040 1768 B43888A4686M***
306 B43888A9685M***
408 B43888A9106M***
748 B43888A9226M***
620 1054 B43888A9336M***
810 1377 B43888A9476M***
790 1343 B43888F9476M***
1040 1768 B43888A9686M***
340 B43888A5685M***
459 B43888A5106M***
867 B43888A5226M***
850 B43888F5226M***
680 1156 B43888A5336M***
870 1479 B43888A5476M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk for 10 mm 002 = for cut leads, bulk for 10 mm 003 = for crimped leads, blister for 16 mm 004 = for J leads, blister from d x l = 10 x 16 mm to 18 x mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 10 x 16 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 16 x 20 mm to 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 7 of 24

B43888 Very long useful life 105 °C Useful life depending on ambient temperature TA under ripple current operating conditions1 VR = 160 450 V DC

Frequency factor of permissible ripple current IAC versus frequency f
1 Refer to chapter "General technical information, Calculation of useful life" for an explanation on how to interpret the useful life graphs.

Please read Cautions and warnings and Important notes at the end of this document.

Page 8 of 24

B43888 Very long useful life 105 °C

Taping, packing and lead configurations

Taping

Single-ended capacitors are available taped in Ammo pack from diameter 5 to 18 mm as follows Lead spacing F = mm d = 5 mm Lead spacing F = mm d = 8 mm Lead spacing F = mm d = 5 mm Lead spacing F = mm d = 16 18 mm .
Lead spacing mm d = 5 mm Last 3 digits of ordering code 007

Dimensions in mm

W W0 W1 W2 H0 P

P0 P1 I1

Toler- ance
min.
max.
max.
max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 9 of 24

B43888 Very long useful life 105 °C
Lead spacing mm d = 8 mm Last 3 digits of ordering code 006

Dimensions in mm

W0 W1 W2 P

Toler- ance
min. max. max. max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 10 of 24
Lead spacing mm d = 5 8 mm Last 3 digits of ordering code 008

B43888 Very long useful life 105 °C
Lead spacing mm d = 10 mm Last 3 digits of ordering code 008

Dimensions in mm
8 10 Toler- ance

W W0 W1 W2
min. max.
max. max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 11 of 24

B43888 Very long useful life 105 °C
Lead spacing mm d = 16 mm Last 3 digits of ordering code 009

Dimensions in mm

W0 W1 W2 P

Tolerance
min.
max.
max.
* Available only for case dimensions 18 x 20, 18 x 25 and 18 x mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 12 of 24

Packing units and box dimensions Ammo pack

B43888 Very long useful life 105 °C

Case size dxl mm 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 25 x 30 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x

Dimensions mm

Amax 345

Bmax 55

Cmax 240
345 55 290
345 55 240
345 55 280
345 60 200
345 60 200
345 65 280
345 65 280
345 65 280
345 65 275
315 65 275
315 65 275
315 65 275
315 65 275
315 65 275
315 65 275

Packing units pcs. 2000 1000
750 500 300 250

Please read Cautions and warnings and Important notes at the end of this document.

Page 13 of 24

B43888 Very long useful life 105 °C

Kinked or cut leads

Single-ended capacitors are available with kinked or cut leads. Other lead configurations also available upon request.
Kinked leads Last 3 digits of ordering code 001

With stand-off rubber seal With flat rubber seal

Case size d x l mm 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 40 22 x 30 22 x 35 22 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 14 of 24
Cut leads Last 3 digits of ordering code 002 With stand-off rubber seal

With flat rubber seal

B43888 Very long useful life 105 °C

Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 15 of 24

B43888 Very long useful life 105 °C

These lead configurations ensure correct placement of the capacitor on the PCB with regard to polarity. PAPR leads are available for diameters from 10 mm up to 20 mm. There are three configurations available Crimped leads, J leads, bent 90° leads
Crimped leads Last 3 digits of ordering code 003

With stand-off rubber seal

With flat rubber seal

Suggestion for PCB hole diameter

Case size d x l mm 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 40

Dimensions mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 16 of 24
J leads Last 3 digits of ordering code 004

B43888 Very long useful life 105 °C

Suggestion for PCB hole diameter

Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35

Dimensions mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 17 of 24

B43888 Very long useful life 105 °C
Bent 90° leads for horizontal mounting pinning Last 3 digits of ordering code 012

Case size d x l mm 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm

Bent leads for diameter mm available upon request.

Please read Cautions and warnings and Important notes at the end of this document.

Page 18 of 24

B43888 Very long useful life 105 °C

Overview of packing units and code numbers for case sizes 5 x 11 16 x

Case size dxl
mm 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 2000 2500 1000 100 500 350 250 200 175 250 200 000

Taped, Ammo pack
pcs.
2000
2000
1000

Code F mm d mm
006 007 008 5 009

Kinked leads, bulk pcs. 500 350 500 175 200 250 001

PAPR

Cut Crimped J leads Bent 90°
leads, leads
leads,
bulk
blister
pcs. pcs.
pcs. pcs.
1000
1000
200 120
200 120
250 344
344 120
002 003
004 012
1 Available upon request

Please read Cautions and warnings and Important notes at the end of this document.

Page 19 of 24

B43888 Very long useful life 105 °C

Overview of packing units and code numbers for case sizes 18 x 20 25 x 40

Case size dxl
mm 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 30 20 x 35 20 x 40 22 x 30 22 x 35 22 x 40 25 x 40 The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 175 150 100 125 100 80 40 000

Taped,

Kinked

Ammo pack
leads, bulk
pcs.
pcs.

Code F mm d mm 001
007 008 5 009

PAPR

Cut Crimped J leads Bent 90°
leads, leads
leads,
bulk
blister
pcs. pcs.
pcs. pcs.
175 200
200 120
150 200
200 120
100 150
150 120
100 150
100 120
125 200
125 200
100 120
100 120
100 120
002 003
004 012

Please read Cautions and warnings and Important notes at the end of this document.

Page 20 of 24

B43888 Very long useful life 105 °C

Cautions and warnings

Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC .

Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited.

As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling Al electrolytic capacitors:

Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B43888P2686M000 Datasheet file may be downloaded here without warranties.

Datasheet ID: B43888P2686M000 511470