B43867 December 2010
Part | Datasheet |
---|---|
![]() |
B43867A4685M (pdf) |
Related Parts | Information |
---|---|
![]() |
B43867A4475M |
![]() |
B43867A1336M |
![]() |
B43867A2107M |
![]() |
B43867A1226M |
![]() |
B43867A2106M |
![]() |
B43867A4395M |
![]() |
B43867A2156M |
![]() |
B43867A2336M |
![]() |
B43867F2156M |
![]() |
B43867A1107M |
![]() |
B43867F2476M |
![]() |
B43867A2686M |
![]() |
B43867A2226M |
![]() |
B43867A1476M |
![]() |
B43867A4226M |
![]() |
B43867A1686M |
![]() |
B43867A4106M |
![]() |
B43867A4335M |
![]() |
B43867F2106M |
![]() |
B43867A2476M |
![]() |
B43867F2226M |
![]() |
B43867A4336M |
PDF Datasheet Preview |
---|
Aluminum electrolytic capacitors Single-ended capacitors Series/Type Date: B43867 December 2010 EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Single-ended capacitors High reliability 140 °C Long-life grade capacitors for professional electronic ballasts Applications Energy-saving lamps Power supplies Features High reliability Compact dimensions Extended temperature range RoHS-compatible Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve Stand-off rubber seal Case with safety vent Delivery mode Refer to chapter "Single-ended capacitors Taping, packing and lead configurations" for further details. B43867 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 30 B43867 High reliability 140 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan 20 °C, 120 Hz Leakage current Ileak 20 °C, 5 min Useful life 140 °C VR IAC,R Requirements Voltage endurance test 140 °C VR Post test requirements Vibration resistance test IEC climatic category Sectional specification 160 350 V DC VR 100 µF ±20% M VR 250 V DC tan max. = VR 350 V DC tan max. = > 1000 h tan Ileak ±35% of initial value 3 times initial specified limit initial specified limit 1000 h ±30% of initial value tan 2 times initial specified limit Ileak initial specified limit To IEC 60068-2-6, test Fc: Frequency range 10 Hz 2 kHz, displacement amplitude max. mm, acceleration max. 20 g, duration 3 x 2 h. Capacitor rigidly clamped by the aluminum case. To IEC 60068-1: VR 250 V 40/140/56 °C/+140 °C/56 days damp heat test VR 350 V 25/140/56 °C/+140 °C/56 days damp heat test IEC 60384-4 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 30 B43867 High reliability 140 °C Technical data and ordering codes CR 120 Hz 20 °C µF Case dimensions dxl mm VR = 160 V DC 10 x 20 16 x 20 16 x 25 VR = 200 V DC 10 x 20 10 x 20 16 x 25 VR = 250 V DC 10 x 20 VR = 350 V DC 10 x 20 10 x 20 10 x 20 16 x 25 IAC,R 120 Hz 140 °C mA 145 200 270 345 450 90 120 170 225 270 370 495 95 120 185 225 330 55 65 75 90 122 210 280 IAC,R 100 kHz 140 °C mA 217 300 405 517 675 135 180 255 337 405 555 742 142 180 277 337 495 82 97 112 135 183 315 420 Ordering code composition see below B43867A1226M*** B43867A1336M*** B43867A1476M*** B43867A1686M*** B43867A1107M*** B43867A2106M*** B43867A2156M*** B43867A2226M*** B43867A2336M*** B43867A2476M*** B43867A2686M*** B43867A2107M*** B43867F2106M*** B43867F2156M*** B43867F2226M*** B43867F2336M*** B43867F2476M*** B43867A4335M*** B43867A4395M*** B43867A4475M*** B43867A4685M*** B43867A4106M*** B43867A4226M*** B43867A4336M*** Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 003 = for crimped leads, blister for 16 mm 004 = for J leads, blister 008 = for taped leads, Ammo pack, lead spacing F = mm for 10 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for 16 mm 012 = for bent 90° leads, blister for 16 mm Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 30 B43867 High reliability 140 °C Useful life depending on ambient temperature TA under ripple current operating conditions1 Frequency factor of permissible ripple current IAC versus frequency f 1 Refer to chapter "General technical information, Calculation of useful life" for an explanation on how to interpret the useful life graphs. Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 30 B43867 High reliability 140 °C Taping, packing and lead configurations Taping Single-ended capacitors are available taped in Ammo pack from diameter 4 to 18 mm as follows Lead spacing F = mm d = 4 5 mm Lead spacing F = mm d = 4 mm Lead spacing F = mm d = 8 mm Lead spacing F = mm d = 4 mm Lead spacing F = mm d = 16 18 mm . Lead spacing mm d = 4 5 mm Last 3 digits of ordering code 016 Dimensions in mm W0 W1 W2 P min. max. max. Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 30 Lead spacing mm d = 4 mm Last 3 digits of ordering code 007 B43867 High reliability 140 °C Dimensions in mm W W0 W1 W2 H0 P P0 P1 I1 Tolerrance min. max. max. max. Lead spacing mm d = 8 mm Last 3 digits of ordering code 006 Dimensions in mm W0 W1 W2 P Tolerance min. max. max. max. Leads can also run straight through the taping area. Taping is available up to dimensions d x l = 8 x 15 mm. Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 30 B43867 High reliability 140 °C Lead spacing mm d = 4 8 mm Last 3 digits of ordering code 008 Lead spacing mm d = 10 mm Last 3 digits of ordering code 008 Dimensions in mm W W0 W1 W2 H0 P Tolerance min. max. max. max. Taping is available up to dimensions d x l = 10 x mm and x 25 mm. Taping is not available for d x l = 8 x 20 mm. Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 30 Lead spacing mm d = 16 mm Last 3 digits of ordering code 009 B43867 High reliability 140 °C Dimensions in mm W0 W1 W2 P Tolerance min. max. max. Taping is available up to dimensions d x l = 16 x mm and 18 x mm. Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 30 B43867 High reliability 140 °C Cut or kinked leads Single-ended capacitors are available with cut or kinked leads. Other lead configurations also available upon request. Cut leads Chapter A Available for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088, B43827, B43828. Last 3 digits of ordering code 002 Case size d x l mm 4 x7 5 x7 5 x 11 x 7 x 11 8 x7 8 x 8 x 15 8 x 20 10 x 10 x 16 10 x 20 10 x 25 10 x Dimensions mm a Case size d x l mm x 16 x 20 x 25 x 40 16 x 20 16 x 25 16 x 16 x 16 x 40 18 x 20 18 x 25 18 x 18 x 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 30 B43867 High reliability 140 °C Cut leads Chapter B Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Last 3 digits of ordering code 002 With stand-off rubber seal With flat rubber seal Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 30 B43867 High reliability 140 °C Kinked leads Chapter A Available for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088, B43827, B43828. Last 3 digits of ordering code 001 Case size d x l mm 4 x7 5 x7 5 x 11 x 7 x 11 8 x7 8 x 8 x 15 8 x 20 10 x 10 x 16 10 x 20 10 x 25 10 x Dimensions mm a Case size d x l mm x 16 x 20 x 25 x 40 16 x 20 16 x 25 16 x 16 x 16 x 40 18 x 20 18 x 25 18 x 18 x 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 30 B43867 High reliability 140 °C Kinked leads Chapter B Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Last 3 digits of ordering code 001 With stand-off rubber seal With flat rubber seal Case size d x l mm 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 30 B43867 High reliability 140 °C These lead configurations ensure correct placement of the capacitor on the PCB with regard to polarity. PAPR leads are available for diameters from 10 mm up to 18 mm. There are three configurations available Crimped leads, J leads, bent 90° leads Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Crimped leads Last 3 digits of ordering code 003 With stand-off rubber seal With flat rubber seal Suggestion for PCB hole diameter Case size d x l mm 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 30 J leads Last 3 digits of ordering code 004 B43867 High reliability 140 °C Suggestion for PCB hole diameter Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 Dimensions mm Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 30 B43867 High reliability 140 °C Bent 90° leads for horizontal mounting pinning Last 3 digits of ordering code 012 Case size d x l mm 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm Bent leads for diameter mm available upon request. Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 30 B43867 High reliability 140 °C Packing units and box dimensions Ammo pack Valid for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088, B43827, B43828. Case size dxl mm 4x7 5x7 5 x 11 x 7 x 11 8x7 8 x 8 x 15 10 x 10 x 16 10 x 20 x 20 x 25 16 x 25 16 x 18 x 20 18 x 25 18 x Dimensions mm Amax 330 Bmax 50 Cmax 196 330 50 226 330 50 226 330 50 286 330 50 286 330 50 246 330 50 246 330 50 246 330 50 196 330 54 196 330 58 196 341 60 272 341 65 272 320 65 270 315 65 275 315 65 275 315 65 275 315 65 275 Packing units pcs. 2000 1000 500 300 250 Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 30 B43867 High reliability 140 °C Ammo pack Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Case size dxl mm 8 x 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x Dimensions mm Amax 345 4 x7 5 x7 5 x 11 x 7 x 11 8 x7 8 x 8 x 15 8 x 20 10 x 10 x 16 10 x 20 10 x 25 x 16 x 20 x 25 x 40 16 x 20 16 x 25 16 x 16 x 16 x 40 The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 10000 7500 5000 2500 2000 1500 2000 1500 1000 750 500 375 250 000 Taped, Kinked leads, Ammo pack bulk pcs. pcs. 2000 15000 2000 10000 2000 10000 2000 10000 2000 5000 1000 5000 1000 4000 1000 2500 2000 2500 2000 1500 1250 1000 Code F mm d mm 001 16 18 Cut leads, bulk pcs. 15000 10000 5000 4000 2500 2000 2500 2000 1500 1250 1000 500 750 500 375 002 Please read Cautions and warnings and Important notes at the end of this document. Page 21 of 30 B43867 High reliability 140 °C Overview of packing units and code numbers for case sizes 18 x 20 18 x 40 Case size dxl mm 18 x 20 18 x 25 18 x 18 x 18 x 40 The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 250 000 Taped, Ammo pack pcs. Code F mm d mm 16 18 Kinked leads, bulk pcs. 100 001 Cut leads, bulk pcs. 100 002 Please read Cautions and warnings and Important notes at the end of this document. Page 22 of 30 B43867 High reliability 140 °C Overview of packing units and code numbers for case sizes 8 x 16 x Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Case size dxl mm 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x 16 x The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 1000 500 350 250 200 175 250 200 100 000 Taped, Ammo pack pcs. 1000 Code F mm d mm 006 008 5 009 Kinked leads, bulk pcs. 500 350 500 200 250 100 001 PAPR Cut Crimped J leads, Bent 90° leads, leads, blister leads, bulk blister blister pcs. pcs. pcs. pcs. 1000 1000 200 120 200 120 250 344 344 120 100 150 002 003 004 012 1 Available upon request Please read Cautions and warnings and Important notes at the end of this document. Page 23 of 30 B43867 High reliability 140 °C Overview of packing units and code numbers for case sizes 18 x 20 18 x 40 Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Case size dxl mm 18 x 20 18 x 25 18 x 18 x 35 18 x 40 The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 175 150 100 125 000 Taped, Ammo pack pcs. 250 Code F mm d mm 009 Kinked leads, bulk pcs. 175 150 100 001 PAPR Cut Crimped J leads, Bent 90° leads, leads, blister leads, bulk blister blister pcs. pcs. pcs. pcs. 175 200 200 120 150 200 200 120 100 150 150 120 100 150 100 120 002 003 004 012 Please read Cautions and warnings and Important notes at the end of this document. Page 24 of 30 B43867 High reliability 140 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC . Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 25 of 30 B43867 High reliability 140 °C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Polarity Mounting position of screwterminal capacitors Mounting of single-ended capacitors Robustness of terminals Soldering Safety information Reference |
More datasheets: B43867A2107M | B43867A1226M | B43867A2106M | B43867A4395M | B43867A2156M | B43867A2336M | B43867F2156M | B43867A1107M | B43867F2476M | B43867A2686M |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B43867A4685M Datasheet file may be downloaded here without warranties.