B43866A1476M

B43866A1476M Datasheet


B43866 December 2006

Part Datasheet
B43866A1476M B43866A1476M B43866A1476M (pdf)
Related Parts Information
B43866A2336M B43866A2336M B43866A2336M
B43866A2686M B43866A2686M B43866A2686M
B43866A1227M B43866A1227M B43866A1227M
B43866A2227M B43866A2227M B43866A2227M
B43866F2156M B43866F2156M B43866F2156M
B43866A1336M B43866A1336M B43866A1336M
B43866A1226M B43866A1226M B43866A1226M
B43866F2106M B43866F2106M B43866F2106M
B43866A2106M B43866A2106M B43866A2106M
B43866A2156M B43866A2156M B43866A2156M
B43866A1106M B43866A1106M B43866A1106M
B43866A2476M B43866A2476M B43866A2476M
B43866A4685M B43866A4685M B43866A4685M
B43866F2336M B43866F2336M B43866F2336M
B43866A1107M B43866A1107M B43866A1107M
B43866A4106M B43866A4106M B43866A4106M
B43866A4335M B43866A4335M B43866A4335M
B43866A4395M B43866A4395M B43866A4395M
B43866A4475M B43866A4475M B43866A4475M
B43866A2107M B43866A2107M B43866A2107M
B43866A2226M B43866A2226M B43866A2226M
B43866A1686M B43866A1686M B43866A1686M
PDF Datasheet Preview
Aluminum electrolytic capacitors

Single-ended capacitors

Series/Type Date:

B43866 December 2006

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

Single-ended capacitors Up to 125 °C

Long-life grade capacitors for professional electronic ballasts

Applications Energy-saving lamps Electronic ballasts Power supplies Automotive applications

Features High ripple current capability Wide temperature range up to 125 °C

Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve Case with safety vent

Delivery mode Terminal configurations and packing:
Refer to chapter "Single-ended capacitors - Taping, packing and lead configurations" for further details and ordering example.

B43866

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 24

B43866 Up to 125 °C

Specifications and characteristics in brief

Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan 20 °C, 120 Hz Leakage current Ileak 20 °C, 5 min Self-inductance ESL

Useful life 125 °C, VR, IAC,R Requirements

Voltage endurance test 125 °C, VR Post test requirements

Vibration resistance test

IEC climatic category

Sectional specification
160 350 V DC VR 220 µF ±20% M VR 250 V DC tan = VR 350 V DC tan =

Diameter mm

ESL nH
> 2000 h
tan Ileak
±35% of initial value 3 times initial specified limit initial specified limit
2000 h
±30% of initial value
tan 2 times initial specified limit

Ileak
initial specified limit

To IEC 60068-2-6, test Fc:

Displacement amplitude mm, frequency range 10 2000 Hz,
acceleration max. 20 g, duration 3 x 2 h.

Capacitor rigidly clamped by the aluminum case.

To IEC 60068-1:

VR 250 V 40/125/56 °C/+125 °C/56 days damp heat test VR 350 V 25/125/56 °C/+125 °C/56 days damp heat test

IEC 60384-4

Please read Cautions and warnings and Important notes at the end of this document.

Page 3 of 24

B43866 Up to 125 °C

Dimensional drawings With stand-off rubber seal Diameters mm 10, 16, 18

With flat rubber seal Diameter mm 20

Dimensions and weights

Dimensions mm d 10 16 18 20
l 16 20 25 20 25 20 25

Approx. weight g

Please read Cautions and warnings and Important notes at the end of this document.

Page 4 of 24
Technical data and ordering codes

Case
120 Hz dimensions
20 °C d x l

VR = 160 V DC
10 x 16
10 x 20
16 x 20
16 x 25

VR = 200 V DC
10 x 20
10 x 20
16 x 25
18 x 35

VR = 250 V DC
10 x 20
16 x 20
20 x 25

VR = 300 V DC
16 x 20
18 x 20
20 x 25

ESRmax 120 Hz °C
1162 529 350 249 172 116 53
1162 774 529 350 249 172 116 53
1162 774 295 350 138 65
295 197 138

ESRmax 120 Hz 20 °C

Zmax

IAC,R
IAC,max Ordering code
100 kHz 100 kHz 100 kHz composition see
20 °C 125 °C 105 °C beolow
150 225 315 435 533 720 780
210 315 441 609 746 1008 1092

B43866A1106M*** B43866A1226M*** B43866A1336M*** B43866A1476M*** B43866A1686M*** B43866A1107M*** B43866A1227M***
158 195 278 360 435 548 765 825
221 273 389 504 609 767 1071 1155

B43866A2106M*** B43866A2156M*** B43866A2226M*** B43866A2336M*** B43866A2476M*** B43866A2686M*** B43866A2107M*** B43866A2227M***
158 195 310 360 530 920
221 273 434 504 742 1288

B43866F2106M*** B43866F2156M*** B43866W2226M*** B43866F2336M*** B43866W2476M*** B43866W2107M***
310 450 560 920
434 630 784 1288

B43866W3226M*** B43866W3336M*** B43866W3476M*** B43866W3107M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk for 10 mm 002 = for cut leads, bulk for 10 mm 003 = for crimped leads, blister for 16 mm 004 = for J leads, blister from d x l = 10 x 16 mm to 18 x 25 mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 10 x 16 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 16 x 20 mm to 18 x 25 mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 6 of 24

B43866 Up to 125 °C
Technical data and ordering codes

Case
120 Hz dimensions
20 °C d x l

VR = 350 V DC
10 x 20
10 x 20
10 x 20
16 x 20
16 x 20
20 x 20
20 x 25

ESRmax 120 Hz °C
4396 3721 3087 2142 3087
337 225 158 109

ESRmax 120 Hz 20 °C

Zmax

IAC,R
IAC,max Ordering code
100 kHz 100 kHz 100 kHz composition see
20 °C 125 °C 105 °C beolow
90 105 120 143 202
355 450 580 750
126 147 168 200 283 497 630 812 1050

B43866A4335M*** B43866A4395M*** B43866A4475M*** B43866A4685M*** B43866A4106M*** B43866W4226M*** B43866W4336M*** B43866W4476M*** B43866W4686M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk for 10 mm 002 = for cut leads, bulk for 10 mm 003 = for crimped leads, blister for 16 mm 004 = for J leads, blister from d x l = 10 x 16 mm to 18 x 25 mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 10 x 16 mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 16 x 20 mm to 18 x 25 mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 7 of 24

B43866 Up to 125 °C Useful life depending on ambient temperature TA under ripple current operating conditions1

Frequency factor of permissible ripple current IAC versus frequency f
1 Refer to chapter "General technical information, Calculation of useful life" for an explanation on how to interpret the useful life graphs.

Please read Cautions and warnings and Important notes at the end of this document.

Page 8 of 24

B43866 Up to 125 °C

Taping, packing and lead configurations

Taping

Single-ended capacitors are available taped in Ammo pack from diameter 5 to 18 mm as follows Lead spacing F = mm d = 5 mm Lead spacing F = mm d = 8 mm Lead spacing F = mm d = 5 mm Lead spacing F = mm d = 16 18 mm .
Lead spacing mm d = 5 mm Last 3 digits of ordering code 007

Dimensions in mm

W W0 W1 W2 H0 P

P0 P1 I1

Toler- ance
min.
max.
max.
max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 9 of 24

B43866 Up to 125 °C
Lead spacing mm d = 8 mm Last 3 digits of ordering code 006

Dimensions in mm

W0 W1 W2 P

Toler- ance
min. max. max. max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 10 of 24
Lead spacing mm d = 5 8 mm Last 3 digits of ordering code 008

B43866 Up to 125 °C
Lead spacing mm d = 10 mm Last 3 digits of ordering code 008

Dimensions in mm
8 10 Toler- ance

W W0 W1 W2
min. max.
max. max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 11 of 24

B43866 Up to 125 °C
Lead spacing mm d = 16 mm Last 3 digits of ordering code 009

Dimensions in mm

W0 W1 W2 P

Tolerance
min.
max.
max.
* Available only for case dimensions 18 x 20, 18 x 25 and 18 x mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 12 of 24

Packing units and box dimensions Ammo pack

B43866 Up to 125 °C

Case size dxl mm 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 25 x 30 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x

Dimensions mm

Amax 345

Bmax 55

Cmax 240
345 55 290
345 55 240
345 55 280
345 60 200
345 60 200
345 65 280
345 65 280
345 65 280
345 65 275
315 65 275
315 65 275
315 65 275
315 65 275
315 65 275
315 65 275

Packing units pcs. 2000 1000
750 500 300 250

Please read Cautions and warnings and Important notes at the end of this document.

Page 13 of 24

B43866 Up to 125 °C

Kinked or cut leads

Single-ended capacitors are available with kinked or cut leads. Other lead configurations also available upon request.
Kinked leads Last 3 digits of ordering code 001

With stand-off rubber seal With flat rubber seal

Case size d x l mm 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 40 22 x 30 22 x 35 22 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 14 of 24
Cut leads Last 3 digits of ordering code 002 With stand-off rubber seal

With flat rubber seal

B43866 Up to 125 °C

Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 15 of 24

B43866 Up to 125 °C

These lead configurations ensure correct placement of the capacitor on the PCB with regard to polarity. PAPR leads are available for diameters from 10 mm up to 20 mm. There are three configurations available Crimped leads, J leads, bent 90° leads
Crimped leads Last 3 digits of ordering code 003

With stand-off rubber seal

With flat rubber seal

Suggestion for PCB hole diameter

Case size d x l mm 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 40

Dimensions mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 16 of 24
J leads Last 3 digits of ordering code 004

Suggestion for PCB hole diameter

B43866 Up to 125 °C

Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35

Dimensions mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 17 of 24

B43866 Up to 125 °C
Bent 90° leads for horizontal mounting pinning Last 3 digits of ordering code 012

Case size d x l mm 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm

Bent leads for diameter mm available upon request.

Please read Cautions and warnings and Important notes at the end of this document.

Page 18 of 24

B43866 Up to 125 °C

Overview of packing units and code numbers for case sizes 5 x 11 16 x

Case size dxl
mm 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 2000 2500 1000 100 500 350 250 200 175 250 200 000

Taped, Ammo pack
pcs.
2000
2000
1000

Code F mm d mm
006 007 008 5 009

Kinked leads, bulk pcs. 500 350 500 175 200 250 001

PAPR

Cut Crimped J leads Bent 90°
leads, leads
leads,
bulk
blister
pcs. pcs.
pcs. pcs.
1000
1000
200 120
200 120
250 344
344 120
002 003
004 012
1 Available upon request

Please read Cautions and warnings and Important notes at the end of this document.

Page 19 of 24

B43866 Up to 125 °C

Overview of packing units and code numbers for case sizes 18 x 20 25 x 40

Case size dxl
mm 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 30 20 x 35 20 x 40 22 x 30 22 x 35 22 x 40 25 x 40 The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 175 150 100 125 100 80 40 000

Taped,

Kinked

Ammo pack
leads, bulk
pcs.
pcs.

Code F mm d mm 001
007 008 5 009

PAPR

Cut Crimped J leads Bent 90°
leads, leads
leads,
bulk
blister
pcs. pcs.
pcs. pcs.
175 200
200 120
150 200
200 120
100 150
150 120
100 150
100 120
125 200
125 200
100 120
100 120
100 120
002 003
004 012

Please read Cautions and warnings and Important notes at the end of this document.

Page 20 of 24

B43866 Up to 125 °C

Cautions and warnings

Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC .

Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited.

As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling Al electrolytic capacitors:

Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water.
More datasheets: B43866A2476M | B43866A4685M | B43866F2336M | B43866A1107M | B43866A4106M | B43866A4335M | B43866A4395M | B43866A4475M | B43866A2107M | B43866A2226M


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B43866A1476M Datasheet file may be downloaded here without warranties.

Datasheet ID: B43866A1476M 511468