B43858C5475M8

B43858C5475M8 Datasheet

B43858 November 2008

Part	Datasheet
B43858C5475M8	B43858C5475M8 (pdf)

Related Parts	Information
B43858C4476M	B43858C4476M
B43858C4106M8	B43858C4106M8
B43858C2336M8	B43858C2336M8
B43858C5225M000	B43858C5225M000
B43858C9106M8	B43858C9106M8
B43858C5475M000	B43858C5475M000
B43858C4686M9	B43858C4686M9
B43858C2107M	B43858C2107M
B43858C4226M	B43858C4226M
B43858C9107M000	B43858C9107M000
B43858C1337M	B43858C1337M
B43858C9475M000	B43858C9475M000
B43858C9335M8	B43858C9335M8
B43858C4335M8	B43858C4335M8
B43858C5476M9	B43858C5476M9
B43858C4336M000	B43858C4336M000
B43858C5335M	B43858C5335M
B43858C4685M	B43858C4685M
B43858C4475M8	B43858C4475M8
B43858C4225M8	B43858C4225M8
B43858C9335M	B43858C9335M
B43858C4335M	B43858C4335M
B43858C4225M	B43858C4225M
B43858C9225M	B43858C9225M
B43858C2106M000	B43858C2106M000
B43858C2106M8	B43858C2106M8
B43858C9476M	B43858C9476M
B43858C5336M000	B43858C5336M000
B43858C5106M8	B43858C5106M8
B43858C5106M	B43858C5106M
B43858C2476M	B43858C2476M
B43858C5685M000	B43858C5685M000
B43858C5685M8	B43858C5685M8
B43858C4106M000	B43858C4106M000
B43858C2107M9	B43858C2107M9
B43858C4336M9	B43858C4336M9
B43858C4226M8	B43858C4226M8
B43858C5336M9	B43858C5336M9
B43858C5226M000	B43858C5226M000
B43858C9336M000	B43858C9336M000
B43858C2227M000	B43858C2227M000
B43858C1227M	B43858C1227M
B43858C4686M	B43858C4686M
B43858C9226M	B43858C9226M
B43858C2686M9	B43858C2686M9
B43858C2336M	B43858C2336M
B43858C4685M8	B43858C4685M8
B43858C9686M000	B43858C9686M000
B43858C9685M000	B43858C9685M000
B43858C9106M000	B43858C9106M000
B43858C4475M000	B43858C4475M000
B43858C5686M	B43858C5686M
B43858C9336M9	B43858C9336M9
B43858C2226M000	B43858C2226M000
B43858C5476M000	B43858C5476M000
B43858C4107M000	B43858C4107M000
B43858C2686M	B43858C2686M

PDF Datasheet Preview
Aluminum electrolytic capacitors Single-ended capacitors Series/Type Date: B43858 November 2008 EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Single-ended capacitors High ripple current 105 °C Long-life grade capacitors for electronic ballasts Applications Electronic ballasts Power supplies Features High ripple current capability at high frequency Long useful life RoHS-compatible Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve Case with safety vent Delivery mode Terminal configurations and packing: Refer to chapter "Single-ended capacitors Taping, packing and lead configurations" for further details and ordering example. B43858 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 26 B43858 High ripple current 105 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan 20 °C, 120 Hz Leakage current Ileak 20 °C, 5 min Self-inductance ESL Useful life 105 °C VR IAC,R 40 °C VR IAC,R Requirements Voltage endurance test 105 °C VR Post test requirements Vibration resistance test IEC climatic category Sectional specification 160 450 V DC VR 330 µF ±20% M VR 350 V DC tan max. = VR 400 V DC tan max. = Diameter mm ESL nH > 5000 h > h tan Ileak ±35% of initial value 3 times initial specified limit initial specified limit 5000 h ±25% of initial value tan 2 times initial specified limit Ileak initial specified limit To IEC 60068-2-6, test Fc: Displacement amplitude mm, frequency range 10 2000 Hz, acceleration max. 20 g, duration 3 x 2 h. Capacitor rigidly clamped by the aluminum case. To IEC 60068-1: VR 250 V 40/105/56 °C/+105 °C/56 days damp heat test VR 350 V 25/105/56 °C/+105 °C/56 days damp heat test IEC 60384-4 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 26 B43858 High ripple current 105 °C Dimensional drawings With stand-off rubber seal Diameters mm 10, 16, 18 With flat rubber seal Diameter mm 20 Dimensions and weights Dimensions mm d 10 16 18 20 l 16 20 25 20 25 35 40 35 40 Approx. weight g Technical data and ordering codes CR 120 Hz 20 °C µF Case dimensions dxl mm VR = 160 V DC 10 x 16 10 x 20 16 x 25 20 x 35 IAC,R 100 kHz 105 °C mA 420 540 650 900 1100 1320 1800 IAC,max 100 kHz 85 °C mA 714 918 1105 1530 1870 2244 3060 Ordering code composition see below B43858C1226M* B43858C1336M* B43858C1476M* B43858C1686M* B43858C1107M* B43858C1227M* B43858C1337M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 16 x mm 008 = for taped leads, Ammo pack, lead spacing F = 5 mm from d x l = 10 x mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 16 x 20 mm to 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 26 B43858 High ripple current 105 °C Technical data and ordering codes CR 120 Hz 20 °C µF Case dimensions dxl mm VR = 200 V DC 10 x 16 10 x 16 10 x 20 16 x 20 16 x 25 18 x 35 VR = 250 V DC 10 x 16 10 x 20 16 x 25 18 x 40 VR = 350 V DC 10 x 16 10 x 16 10 x 16 10 x 20 16 x 20 18 x 40 IAC,R 100 kHz 105 °C mA 200 470 500 780 850 1250 1390 280 510 600 700 1150 1350 1460 100 130 180 220 300 560 580 1000 1200 1450 IAC,max 100 kHz 85 °C mA 340 799 850 1326 1445 2125 2363 476 867 1020 1190 1955 2295 2482 170 221 306 374 510 952 986 1700 2040 2465 Ordering code composition see below B43858C2106M* B43858C2226M* B43858C2336M* B43858C2476M* B43858C2686M* B43858C2107M* B43858C2227M* B43858H2106M* B43858H2226M* B43858H2336M* B43858H2476M* B43858H2686M* B43858H2107M* B43858H2227M* B43858C4225M* B43858C4335M* B43858C4475M* B43858C4685M* B43858C4106M* B43858C4226M* B43858C4336M* B43858C4476M* B43858C4686M* B43858C4107M* Composition of ordering code * = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 16 x mm 008 = for taped leads, Ammo pack, lead spacing F = 5 mm from d x l = 10 x mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 16 x 20 mm to 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 26 B43858 High ripple current 105 °C Technical data and ordering codes CR 120 Hz 20 °C µF Case dimensions dxl mm VR = 400 V DC 10 x 16 10 x 16 10 x 16 10 x 20 16 x 25 18 x 40 20 x 40 VR = 450 V DC 10 x 16 10 x 16 10 x 20 16 x 25 18 x 40 IAC,R 100 kHz 105 °C mA 100 130 180 270 300 560 720 980 1300 1550 100 130 180 270 300 600 780 980 1350 IAC,max 100 kHz 85 °C mA 170 221 306 459 510 952 1224 1666 2210 2635 170 221 306 459 510 1020 1326 1666 2295 Ordering code composition see below B43858C9225M* B43858C9335M* B43858C9475M* B43858C9685M* B43858C9106M* B43858C9226M* B43858C9336M* B43858C9476M* B43858C9686M* B43858C9107M* B43858C5225M* B43858C5335M* B43858C5475M* B43858C5685M* B43858C5106M* B43858C5226M* B43858C5336M* B43858C5476M* B43858C5686M* Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 16 x mm 008 = for taped leads, Ammo pack, lead spacing F = 5 mm from d x l = 10 x mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 16 x 20 mm to 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 26 B43858 High ripple current 105 °C Useful life depending on ambient temperature TA under ripple current operating conditions1 Frequency factor of permissible ripple current IAC versus frequency f 1 Refer to chapter "General technical information, Calculation of useful life" for an explanation on how to interpret the useful life graphs. Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 26 B43858 High ripple current 105 °C Taping, packing and lead configurations Taping Single-ended capacitors are available taped in Ammo pack from diameter 5 to 18 mm as follows Lead spacing F = mm d = 5 mm Lead spacing F = mm d = 8 mm Lead spacing F = mm from d x l = 10 x mm to x 30 mm Lead spacing F = mm d = 16 18 mm . Lead spacing mm d = 5 mm Last 3 digits of ordering code 007 Dimensions in mm W W0 W1 W2 H0 P P0 P1 I1 Tolerance min. max. max. max. Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 26 B43858 High ripple current 105 °C Lead spacing mm d = 8 mm Last 3 digits of ordering code 006 Dimensions in mm W0 W1 W2 P Tolerance min. max. max. max. Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 26 Lead spacing mm d = 5 8 mm Last 3 digits of ordering code 008 B43858 High ripple current 105 °C Lead spacing mm from d x l = 10 x mm to x 30 mm Last 3 digits of ordering code 008 Dimensions in mm W W0 W1 W2 H0 Tolerance min. max. max. max. Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 26 B43858 High ripple current 105 °C Lead spacing mm d = 16 mm Last 3 digits of ordering code 009 Dimensions in mm W0 W1 W2 P Tolerance min. max. max. * Available only for case dimensions 18 x 20, 18 x 25 and 18 x mm Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 26 Packing units and box dimensions Ammo pack B43858 High ripple current 105 °C Case size dxl mm 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x Dimensions mm Amax 345 Bmax 55 Cmax 240 345 55 290 345 55 240 345 55 280 345 60 200 345 60 200 345 65 280 345 65 280 315 65 275 315 65 275 315 65 275 315 65 275 315 65 275 315 65 275 Packing units pcs. 2000 1000 750 500 300 250 Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 26 B43858 High ripple current 105 °C Kinked or cut leads Single-ended capacitors are available with kinked or cut leads. Other lead configurations also available upon request. Kinked leads Last 3 digits of ordering code 001 With stand-off rubber seal With flat rubber seal Case size d x l mm 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 26 Cut leads Last 3 digits of ordering code 002 With stand-off rubber seal With flat rubber seal B43858 High ripple current 105 °C Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 30 20 x 35 20 x 40 22 x 30 22 x 35 22 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 26 B43858 High ripple current 105 °C These lead configurations ensure correct placement of the capacitor on the PCB with regard to polarity. PAPR leads are available for diameters from 10 mm up to 20 mm. There are three configurations available Crimped leads, J leads, bent 90° leads Crimped leads Last 3 digits of ordering code 003 With stand-off rubber seal With flat rubber seal Suggestion for PCB hole diameter Case size d x l mm 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 30 20 x 35 20 x 40 Dimensions mm Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 26 J leads Last 3 digits of ordering code 004 B43858 High ripple current 105 °C Suggestion for PCB hole diameter Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 Dimensions mm Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 26 B43858 High ripple current 105 °C Bent 90° leads for horizontal mounting pinning Last 3 digits of ordering code 012 Case size d x l mm 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm Bent leads for diameter mm available upon request. Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 26 B43858 High ripple current 105 °C Overview of packing units and code numbers for case sizes 5 x 11 16 x Case size dxl mm 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 2000 2500 1000 500 350 250 200 175 250 200 000 Taped, Ammo pack pcs. 2000 2000 1000 Code F mm d mm 006 007 008 5 009 Kinked leads, bulk pcs. PAPR Cut Crimped J leads, Bent 90° leads, leads, blister leads, bulk blister blister pcs. pcs. pcs. pcs. 1000 1000 200 120 200 120 250 344 344 120 002 003 004 012 1 Available upon request Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 26 B43858 High ripple current 105 °C Overview of packing units and code numbers for case sizes 18 x 20 25 x 40 Case size dxl mm 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 30 20 x 35 20 x 40 22 x 30 22 x 35 22 x 40 25 x 40 The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 175 150 100 125 100 80 40 000 Taped, Kinked Ammo pack leads, bulk pcs. pcs. Code F mm d mm 001 007 008 5 009 PAPR Cut Crimped J leads, Bent 90° leads, leads, blister leads, bulk blister blister pcs. pcs. pcs. pcs. 175 200 200 120 150 200 200 120 100 150 150 120 100 150 100 120 125 200 125 200 100 120 100 120 100 120 002 003 004 012 Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 26 B43858 High ripple current 105 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC . Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling Al electrolytic capacitors: Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document.

PDF Datasheet Preview

Aluminum electrolytic capacitors

Single-ended capacitors

Series/Type Date:

B43858 November 2008

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

Single-ended capacitors High ripple current 105 °C

Long-life grade capacitors for electronic ballasts

Applications Electronic ballasts Power supplies

Features High ripple current capability at high frequency Long useful life RoHS-compatible

Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve Case with safety vent

Delivery mode Terminal configurations and packing:
Refer to chapter "Single-ended capacitors Taping, packing and lead configurations" for further details and ordering example.

B43858

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 26

B43858 High ripple current 105 °C

Specifications and characteristics in brief

Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan 20 °C, 120 Hz Leakage current Ileak 20 °C, 5 min Self-inductance ESL

Useful life 105 °C VR IAC,R
40 °C VR IAC,R Requirements

Voltage endurance test 105 °C VR Post test requirements

Vibration resistance test

IEC climatic category

Sectional specification
160 450 V DC VR 330 µF ±20% M VR 350 V DC tan max. = VR 400 V DC tan max. =

Diameter mm

ESL nH
> 5000 h > h
tan Ileak
±35% of initial value 3 times initial specified limit initial specified limit
5000 h
±25% of initial value
tan 2 times initial specified limit

Ileak
initial specified limit

To IEC 60068-2-6, test Fc:

Displacement amplitude mm, frequency range 10 2000 Hz,
acceleration max. 20 g, duration 3 x 2 h.

Capacitor rigidly clamped by the aluminum case.

To IEC 60068-1:

VR 250 V 40/105/56 °C/+105 °C/56 days damp heat test VR 350 V 25/105/56 °C/+105 °C/56 days damp heat test

IEC 60384-4

Please read Cautions and warnings and Important notes at the end of this document.

Page 3 of 26

B43858 High ripple current 105 °C

Dimensional drawings

With stand-off rubber seal Diameters mm 10, 16, 18

With flat rubber seal Diameter mm 20

Dimensions and weights

Dimensions mm d 10 16 18 20
l 16 20 25 20 25 35 40 35 40

Approx. weight g
Technical data and ordering codes

CR 120 Hz 20 °C µF

Case dimensions dxl mm

VR = 160 V DC
10 x 16
10 x 20
16 x 25
20 x 35

IAC,R 100 kHz 105 °C mA
420 540 650 900 1100 1320 1800

IAC,max 100 kHz 85 °C mA
714 918 1105 1530 1870 2244 3060
Ordering code composition see below

B43858C1226M*** B43858C1336M*** B43858C1476M*** B43858C1686M*** B43858C1107M*** B43858C1227M*** B43858C1337M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 16 x mm 008 = for taped leads, Ammo pack, lead spacing F = 5 mm from d x l = 10 x mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 16 x 20 mm to 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 5 of 26

B43858 High ripple current 105 °C
Technical data and ordering codes

CR 120 Hz 20 °C µF

Case dimensions dxl mm

VR = 200 V DC
10 x 16
10 x 16
10 x 20
16 x 20
16 x 25
18 x 35

VR = 250 V DC
10 x 16
10 x 20
16 x 25
18 x 40

VR = 350 V DC
10 x 16
10 x 16
10 x 16
10 x 20
16 x 20
18 x 40

IAC,R 100 kHz 105 °C mA
200 470 500 780 850 1250 1390
280 510 600 700 1150 1350 1460
100 130 180 220 300 560 580 1000 1200 1450

IAC,max 100 kHz 85 °C mA
340 799 850 1326 1445 2125 2363
476 867 1020 1190 1955 2295 2482
170 221 306 374 510 952 986 1700 2040 2465
Ordering code composition see below

B43858C2106M*** B43858C2226M*** B43858C2336M*** B43858C2476M*** B43858C2686M*** B43858C2107M*** B43858C2227M***

B43858H2106M*** B43858H2226M*** B43858H2336M*** B43858H2476M*** B43858H2686M*** B43858H2107M*** B43858H2227M***

B43858C4225M*** B43858C4335M*** B43858C4475M*** B43858C4685M*** B43858C4106M*** B43858C4226M*** B43858C4336M*** B43858C4476M*** B43858C4686M*** B43858C4107M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 16 x mm 008 = for taped leads, Ammo pack, lead spacing F = 5 mm from d x l = 10 x mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 16 x 20 mm to 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 6 of 26

B43858 High ripple current 105 °C
Technical data and ordering codes

CR 120 Hz 20 °C µF

Case dimensions dxl mm

VR = 400 V DC
10 x 16
10 x 16
10 x 16
10 x 20
16 x 25
18 x 40
20 x 40

VR = 450 V DC
10 x 16
10 x 16
10 x 20
16 x 25
18 x 40

IAC,R 100 kHz 105 °C mA
100 130 180 270 300 560 720 980 1300 1550
100 130 180 270 300 600 780 980 1350

IAC,max 100 kHz 85 °C mA
170 221 306 459 510 952 1224 1666 2210 2635
170 221 306 459 510 1020 1326 1666 2295
Ordering code composition see below

B43858C9225M*** B43858C9335M*** B43858C9475M*** B43858C9685M*** B43858C9106M*** B43858C9226M*** B43858C9336M*** B43858C9476M*** B43858C9686M*** B43858C9107M***

B43858C5225M*** B43858C5335M*** B43858C5475M*** B43858C5685M*** B43858C5106M*** B43858C5226M*** B43858C5336M*** B43858C5476M*** B43858C5686M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to 18 x 40 mm 002 = for cut leads, bulk 003 = for crimped leads, blister from d x l = 16 x 20 mm to 20 x 40 mm 004 = for J leads, blister from d x l = 10 x mm to 16 x mm 008 = for taped leads, Ammo pack, lead spacing F = 5 mm from d x l = 10 x mm to x 25 mm 009 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 16 x 20 mm to 18 x mm 012 = for bent 90° leads, blister for 16 and 18 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 7 of 26

B43858 High ripple current 105 °C Useful life depending on ambient temperature TA under ripple current operating conditions1

Frequency factor of permissible ripple current IAC versus frequency f
1 Refer to chapter "General technical information, Calculation of useful life" for an explanation on how to interpret the useful life graphs.

Please read Cautions and warnings and Important notes at the end of this document.

Page 8 of 26

B43858 High ripple current 105 °C

Taping, packing and lead configurations

Taping

Single-ended capacitors are available taped in Ammo pack from diameter 5 to 18 mm as follows Lead spacing F = mm d = 5 mm Lead spacing F = mm d = 8 mm Lead spacing F = mm from d x l = 10 x mm to x 30 mm Lead spacing F = mm d = 16 18 mm .
Lead spacing mm d = 5 mm Last 3 digits of ordering code 007

Dimensions in mm

W W0 W1 W2 H0 P

P0 P1 I1

Tolerance
min.
max.
max.
max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 9 of 26

B43858 High ripple current 105 °C
Lead spacing mm d = 8 mm Last 3 digits of ordering code 006

Dimensions in mm

W0 W1 W2 P

Tolerance
min.
max.
max.
max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 10 of 26
Lead spacing mm d = 5 8 mm Last 3 digits of ordering code 008

B43858 High ripple current 105 °C
Lead spacing mm from d x l = 10 x mm to x 30 mm Last 3 digits of ordering code 008

Dimensions in mm

W W0 W1 W2 H0

Tolerance
min. max.
max. max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 11 of 26

B43858 High ripple current 105 °C
Lead spacing mm d = 16 mm Last 3 digits of ordering code 009

Dimensions in mm

W0 W1 W2 P

Tolerance
min.
max.
max.
* Available only for case dimensions 18 x 20, 18 x 25 and 18 x mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 12 of 26

Packing units and box dimensions Ammo pack

B43858 High ripple current 105 °C

Case size dxl mm 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x

Dimensions mm

Amax 345

Bmax 55

Cmax 240
345 55 290
345 55 240
345 55 280
345 60 200
345 60 200
345 65 280
345 65 280
315 65 275
315 65 275
315 65 275
315 65 275
315 65 275
315 65 275

Packing units pcs. 2000 1000
750 500 300 250

Please read Cautions and warnings and Important notes at the end of this document.

Page 13 of 26

B43858 High ripple current 105 °C

Kinked or cut leads

Single-ended capacitors are available with kinked or cut leads. Other lead configurations also available upon request.
Kinked leads Last 3 digits of ordering code 001

With stand-off rubber seal With flat rubber seal

Case size d x l mm 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 14 of 26
Cut leads Last 3 digits of ordering code 002 With stand-off rubber seal

With flat rubber seal

B43858 High ripple current 105 °C

Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 30 20 x 35 20 x 40 22 x 30 22 x 35 22 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 15 of 26

B43858 High ripple current 105 °C

These lead configurations ensure correct placement of the capacitor on the PCB with regard to polarity. PAPR leads are available for diameters from 10 mm up to 20 mm. There are three configurations available Crimped leads, J leads, bent 90° leads
Crimped leads Last 3 digits of ordering code 003

With stand-off rubber seal

With flat rubber seal

Suggestion for PCB hole diameter

Case size d x l mm 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 30 20 x 35 20 x 40

Dimensions mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 16 of 26
J leads Last 3 digits of ordering code 004

B43858 High ripple current 105 °C

Suggestion for PCB hole diameter

Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35

Dimensions mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 17 of 26

B43858 High ripple current 105 °C
Bent 90° leads for horizontal mounting pinning Last 3 digits of ordering code 012

Case size d x l mm 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm

Bent leads for diameter mm available upon request.

Please read Cautions and warnings and Important notes at the end of this document.

Page 18 of 26

B43858 High ripple current 105 °C

Overview of packing units and code numbers for case sizes 5 x 11 16 x

Case size dxl
mm 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 2000 2500 1000 500 350 250 200 175 250 200 000

Taped, Ammo pack
pcs.
2000
2000
1000

Code F mm d mm
006 007 008 5 009

Kinked leads, bulk pcs.

PAPR

Cut Crimped J leads, Bent 90° leads, leads, blister leads,
bulk blister
blister
pcs. pcs.
pcs. pcs.
1000
1000
200 120
200 120
250 344
344 120
002 003
004 012
1 Available upon request

Please read Cautions and warnings and Important notes at the end of this document.

Page 19 of 26

B43858 High ripple current 105 °C

Overview of packing units and code numbers for case sizes 18 x 20 25 x 40

Case size dxl
mm 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 30 20 x 35 20 x 40 22 x 30 22 x 35 22 x 40 25 x 40 The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 175 150 100 125 100 80 40 000

Taped,

Kinked

Ammo pack
leads, bulk
pcs.
pcs.

Code F mm d mm 001
007 008 5 009

PAPR

Cut Crimped J leads, Bent 90°
leads, leads, blister leads,
bulk blister
blister
pcs. pcs.
pcs. pcs.
175 200
200 120
150 200
200 120
100 150
150 120
100 150
100 120
125 200
125 200
100 120
100 120
100 120
002 003
004 012

Please read Cautions and warnings and Important notes at the end of this document.

Page 20 of 26

B43858 High ripple current 105 °C

Cautions and warnings

Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC .

Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited.

As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling Al electrolytic capacitors:

Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water.

Please read Cautions and warnings and Important notes at the end of this document.

More datasheets: B43858C2106M000 | B43858C2106M8 | B43858C9476M | B43858C5336M000 | B43858C5106M8 | B43858C5106M | B43858C2476M | B43858C5685M000 | B43858C5685M8 | B43858C4106M000

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B43858C5475M8 Datasheet file may be downloaded here without warranties.

Datasheet ID: B43858C5475M8 511465