B43770A5128M000

B43770A5128M000 Datasheet

B43750, B43770 November 2012

Part	Datasheet
B43770A5128M000	B43770A5128M000 (pdf)

Related Parts	Information
B43770A9857M000	B43770A9857M000
B43770A4398M000	B43770A4398M000
B43770A5138M003	B43770A5138M003
B43750A5138M000	B43750A5138M000
B43750A9298M7	B43750A9298M7
B43750A4398M7	B43750A4398M7
B43770A5138M000	B43770A5138M000
B43750A5138M003	B43750A5138M003
B43750A9128M7	B43750A9128M7
B43750A5198M7	B43750A5198M7
B43750A4538M003	B43750A4538M003
B43750A9398M000	B43750A9398M000
B43770A9398M000	B43770A9398M000
B43750A5248M000	B43750A5248M000
B43750A5138M7	B43750A5138M7
B43750A4538M7	B43750A4538M7
B43750A9398M7	B43750A9398M7
B43750A9398M003	B43750A9398M003
B43750A5248M7	B43750A5248M7
B43770A4538M003	B43770A4538M003
B43750A5248M003	B43750A5248M003
B43770A4538M000	B43770A4538M000
B43750A4538M000	B43750A4538M000
B43770A5248M003	B43770A5248M003
B43770A9398M003	B43770A9398M003
B43770A5248M000	B43770A5248M000
B43750A4128M000	B43750A4128M000
B43770A5567M000	B43770A5567M000
B43750A5567M000	B43750A5567M000
B43770A4188M000	B43770A4188M000
B43750A9138M7	B43750A9138M7
B43750A5857M7	B43750A5857M7
B43750A4188M7	B43750A4188M7
B43750A5128M000	B43750A5128M000
B43750A4128M003	B43750A4128M003
B43750A9857M000	B43750A9857M000
B43770A5567M003	B43770A5567M003
B43750A5567M003	B43750A5567M003
B43770A9857M003	B43770A9857M003
B43770A5687M003	B43770A5687M003
B43750A5687M003	B43750A5687M003
B43750A5128M7	B43750A5128M7
B43750A9128M000	B43750A9128M000
B43770A9128M000	B43770A9128M000
B43770A5687M000	B43770A5687M000
B43750A5687M000	B43750A5687M000
B43750A4278M7	B43750A4278M7
B43750A9198M7	B43750A9198M7
B43770A5198M000	B43770A5198M000
B43750A5198M000	B43750A5198M000
B43750A9128M003	B43750A9128M003
B43770A9128M003	B43770A9128M003
B43750A4398M000	B43750A4398M000
B43750A4158M7	B43750A4158M7
B43750A5198M003	B43750A5198M003
B43750A5687M7	B43750A5687M7
B43770A4398M003	B43770A4398M003
B43770A5198M003	B43770A5198M003
B43770A9298M003	B43770A9298M003
B43750A9298M003	B43750A9298M003
B43770A9298M000	B43770A9298M000
B43750A9298M000	B43750A9298M000
B43770A4158M000	B43770A4158M000
B43770A5128M003	B43770A5128M003
B43770A4278M003	B43770A4278M003
B43770A9198M003	B43770A9198M003
B43750A9198M003	B43750A9198M003
B43750A4158M000	B43750A4158M000
B43770A9198M000	B43770A9198M000
B43770A4158M003	B43770A4158M003
B43750A4278M003	B43750A4278M003
B43750A5128M003	B43750A5128M003
B43750A9198M000	B43750A9198M000
B43750A4278M000	B43750A4278M000
B43770A4278M000	B43770A4278M000
B43750A4158M003	B43750A4158M003
B43750A9857M7	B43750A9857M7
B43750A9138M000	B43750A9138M000
B43770A9138M000	B43770A9138M000
B43750A4188M003	B43750A4188M003
B43750A5857M003	B43750A5857M003
B43770A5857M003	B43770A5857M003
B43770A5857M000	B43770A5857M000
B43770A4128M003	B43770A4128M003
B43750A5857M000	B43750A5857M000
B43770A4188M003	B43770A4188M003
B43750A5567M7	B43750A5567M7
B43750A9857M003	B43750A9857M003
B43750A4128M7	B43750A4128M7
B43750A4188M000	B43750A4188M000
B43770A4128M000	B43770A4128M000
B43750A9138M003	B43750A9138M003
B43770A9138M003	B43770A9138M003
B43750A4398M003	B43750A4398M003

PDF Datasheet Preview
Aluminum electrolytic capacitors Capacitors with screw terminals Series/Type Date: B43750, B43770 November 2012 EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Capacitors with screw terminals Extremely high ripple current 105 °C Long-life grade capacitors Applications Traction Power electronics Professional power supplies Features Extremely high ripple current capability up to 110 A High reliability Long useful life Wide temperature range All-welded construction ensures reliable electrical contact No base insulation for max. cooling insulated solution "heat sink mounting" upon request Version with low-inductance design available for diameter mm Self-extinguishing electrolyte RoHS-compatible Construction Charge-discharge proof, polar Aluminum case, partially insulated Poles with screw terminal connections Mounting with ring clips, clamps or threaded stud B43750, B43770 B43750 B43770 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 16 B43750, B43770 Extremely high ripple current 105 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan 20 °C, 120 Hz 350 450 V DC VR 560 5300 µF ±20% M Leakage current Ileak 20 °C, 5 min Self-inductance ESL d = mm approx. 14 nH d mm approx. 18 nH Capacitors with low-inductance design d mm approx. 13 nH Useful life1 Requirements: 105 °C VR IAC,R 85 °C VR IAC,R 40 °C VR 3 IAC,R Voltage endurance test > 8000 h > 40000 h > 250000 h ±15% of initial value tan times initial specified limit Ileak initial specified limit Post test requirements: 105 °C, VR IAC,R Vibration resistance test 2000 h ±10% of initial value tan times initial specified limit Ileak initial specified limit To IEC 60068-2-6, test Fc: Identification in third Remark block of ordering code M003 For capacitors with diameter d mm Accessories The following items are included in the delivery package, but are not fastened to the capacitors: Thread Toothed washers For terminals M5 A DIN 6797 Screws/nuts DIN 7985 / ISO 7045-M5 x 10-5.6-Z M6 A DIN 6797 DIN 7985 / ISO 7045-M6 x 12-5.6-Z For mounting M12 J DIN 6797 Hex nut BM 12 DIN 439 Maximum torque Nm thread depth t 8 mm Nm thread depth t mm 10 Nm The following items must be ordered separately. For details, refer to chapter "Capacitors with screw terminals Accessories". Item Ring clips Clamps for capacitors with d mm Insulating parts Type B44030 B44020 Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 16 B43750, B43770 Extremely high ripple current 105 °C Overview of available types VR V DC CR µF 560 680 850 1200 1300 1500 1800 1900 2400 2700 2900 3900 5300 Case dimensions d x l mm The capacitance and voltage ratings listed above are available in different cases upon request. Other voltage and capacitance ratings are also available upon request. Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 16 B43750, B43770 Extremely high ripple current 105 °C Technical data and ordering codes Case 100 Hz dimensions 20 °C d x l VR = 350 V DC 1200 x 1500 x 1800 x 2700 x 3900 x 5300 x VR = 400 V DC 850 x 1200 x 1300 x 1900 x 2900 x 3900 x VR = 450 V DC 560 x 680 x 850 x 1200 x 1300 x 1900 x 2400 x ESRtyp Zmax 100 Hz 10 kHz 20 °C 20 °C 70 110 110 180 90 150 75 120 IAC,max 10 kHz 40 °C A 45 49 56 75 80 45 49 56 75 80 36 45 44 54 68 74 80 IAC,R 10 kHz 105 °C A 10 12 16 20 26 12 16 20 26 IAC,R B 10 kHz 105 °C A IAC,R T+B Ordering code 10 kHz composition see 105 °C below A B4370A4128M000 B4370A4158M00# B4370A4188M000 B4370A4278M00# B4370A4398M00# B4370A4538M00# B4370A9857M000 B4370A9128M00# B4370A9138M000 B4370A9198M00# B4370A9298M00# B4370A9398M00# B4370A5567M000 B4370A5687M00# B4370A5857M000 B4370A5128M00# B4370A5138M00# B4370A5198M00# B4370A5248M00# Composition of ordering code = Mounting style 5 = for capacitors with ring clip/clamp mounting 7 = for capacitors with threaded stud # = Design 0 = for capacitors with standard inductance 3 = for capacitors with low inductance 13 nH only for capacitors with diameter d mm Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 16 B43750, B43770 Extremely high ripple current 105 °C Useful life1 depending on ambient temperature TA, TB, TT+B under ripple current operating conditions Depending on the application, interpret the graph as follows Natural cooling Use rated current IAC,R and ambient temperature TA. Cooling of base Use rated current IAC,R B and temperature of capacitor base TB. Cooling of terminals and base Use rated current IAC,R T+B and temperature of capacitors bas TT+B. Ensure that the temperature of the cooled terminals is lower than that of the case base. Due to the current load capability of the contact elements, the following current limits must not be exceeded, even if the frequency and the temperatur factors have been taken into account: Capacitor diameter mm Capacitor base cooling 62 A 80 A 90 A Terminal and capacitor base cooling 75 A 100 A 110 A 1 Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 16 B43750, B43770 Extremely high ripple current 105 °C Frequency factor of permissible ripple current IAC versus frequency f Frequency characteristics of ESR Typical behavior Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 16 B43750, B43770 Extremely high ripple current 105 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC . Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. However, the amount of dangerous materials used in our products is limited to an absolute minimum. Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS Material Data Sheets are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS Material Safety Data Sheets are available for all of our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 16 B43750, B43770 Extremely high ripple current 105 °C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Polarity Mounting of single-ended capacitors Soldering, cleaning agents Upper category temperature Passive flammability

PDF Datasheet Preview

Aluminum electrolytic capacitors

Capacitors with screw terminals

Series/Type Date:

B43750, B43770 November 2012

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Capacitors with screw terminals Extremely high ripple current 105 °C

Long-life grade capacitors

Applications Traction Power electronics Professional power supplies

Features Extremely high ripple current capability up to 110 A High reliability Long useful life Wide temperature range All-welded construction ensures reliable electrical contact No base insulation for max. cooling insulated solution "heat sink mounting" upon request Version with low-inductance design available for diameter mm Self-extinguishing electrolyte RoHS-compatible

Construction Charge-discharge proof, polar Aluminum case, partially insulated Poles with screw terminal connections Mounting with ring clips, clamps or threaded stud

B43750, B43770

B43750

B43770

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 16

B43750, B43770 Extremely high ripple current 105 °C

Specifications and characteristics in brief

Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance

Dissipation factor tan 20 °C, 120 Hz
350 450 V DC VR 560 5300 µF ±20% M

Leakage current Ileak 20 °C, 5 min

Self-inductance ESL
d = mm approx. 14 nH d mm approx. 18 nH Capacitors with low-inductance design d mm approx. 13 nH

Useful life1

Requirements:
105 °C VR IAC,R 85 °C VR IAC,R 40 °C VR 3 IAC,R

Voltage endurance test
> 8000 h > 40000 h > 250000 h
±15% of initial value
tan times initial specified limit

Ileak
initial specified limit

Post test requirements:
105 °C, VR IAC,R Vibration resistance test
2000 h
±10% of initial value
tan times initial specified limit

Ileak
initial specified limit

To IEC 60068-2-6, test Fc:
Identification in third Remark block of ordering code

M003

For capacitors with diameter d mm

Accessories The following items are included in the delivery package, but are not fastened to the capacitors:

Thread Toothed washers

For terminals M5 A DIN 6797

Screws/nuts DIN 7985 / ISO 7045-M5 x 10-5.6-Z

M6 A DIN 6797 DIN 7985 / ISO 7045-M6 x 12-5.6-Z

For mounting M12 J DIN 6797 Hex nut BM 12 DIN 439

Maximum torque

Nm thread depth t 8 mm Nm thread depth t mm 10 Nm

The following items must be ordered separately. For details, refer to chapter "Capacitors with screw terminals Accessories".

Item Ring clips Clamps for capacitors with d mm Insulating parts

Type B44030 B44020

Please read Cautions and warnings and Important notes at the end of this document.

Page 6 of 16

B43750, B43770 Extremely high ripple current 105 °C

Overview of available types

VR V DC

CR µF 560 680 850
1200 1300 1500 1800 1900 2400 2700 2900 3900 5300

Case dimensions d x l mm

The capacitance and voltage ratings listed above are available in different cases upon request. Other voltage and capacitance ratings are also available upon request.

Please read Cautions and warnings and Important notes at the end of this document.

Page 7 of 16

B43750, B43770 Extremely high ripple current 105 °C
Technical data and ordering codes

Case
100 Hz dimensions
20 °C d x l

VR = 350 V DC
1200 x 1500 x 1800 x 2700 x 3900 x 5300 x

VR = 400 V DC
850 x 1200 x 1300 x 1900 x 2900 x 3900 x

VR = 450 V DC
560 x 680 x 850 x 1200 x 1300 x 1900 x 2400 x

ESRtyp Zmax 100 Hz 10 kHz 20 °C 20 °C
70 110
110 180
90 150
75 120

IAC,max 10 kHz 40 °C A
45 49 56 75 80
45 49 56 75 80
36 45 44 54 68 74 80

IAC,R 10 kHz 105 °C A
10 12 16 20 26
12 16 20 26

IAC,R B 10 kHz 105 °C A
IAC,R T+B Ordering code 10 kHz composition see 105 °C below A

B437*0A4128M000

B437*0A4158M00#

B437*0A4188M000

B437*0A4278M00#

B437*0A4398M00#

B437*0A4538M00#

B437*0A9857M000

B437*0A9128M00#

B437*0A9138M000

B437*0A9198M00#

B437*0A9298M00#

B437*0A9398M00#

B437*0A5567M000

B437*0A5687M00#

B437*0A5857M000

B437*0A5128M00#

B437*0A5138M00#

B437*0A5198M00#

B437*0A5248M00#
Composition of ordering code * = Mounting style
5 = for capacitors with ring clip/clamp mounting 7 = for capacitors with threaded stud
# = Design
0 = for capacitors with standard inductance 3 = for capacitors with low inductance 13 nH
only for capacitors with diameter d mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 8 of 16

B43750, B43770 Extremely high ripple current 105 °C

Useful life1 depending on ambient temperature TA, TB, TT+B under ripple current operating conditions

Depending on the application, interpret the graph as follows Natural cooling

Use rated current IAC,R and ambient temperature TA. Cooling of base

Use rated current IAC,R B and temperature of capacitor base TB. Cooling of terminals and base

Use rated current IAC,R T+B and temperature of capacitors bas TT+B. Ensure that the temperature of the cooled terminals is lower than that of the case base.

Due to the current load capability of the contact elements, the following current limits must not be exceeded, even if the frequency and the temperatur factors have been taken into account:

Capacitor diameter mm

Capacitor base cooling 62 A 80 A 90 A

Terminal and capacitor base cooling 75 A
100 A 110 A
1 Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.

Please read Cautions and warnings and Important notes at the end of this document.

Page 9 of 16

B43750, B43770 Extremely high ripple current 105 °C Frequency factor of permissible ripple current IAC versus frequency f

Frequency characteristics of ESR Typical behavior

Please read Cautions and warnings and Important notes at the end of this document.

Page 10 of 16

B43750, B43770 Extremely high ripple current 105 °C

Cautions and warnings

Personal safety The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC . Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing.

As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. However, the amount of dangerous materials used in our products is limited to an absolute minimum.

Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV.

MDS Material Data Sheets are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS Material Safety Data Sheets are available for all of our electrolytes upon request.

Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water.

Please read Cautions and warnings and Important notes at the end of this document.

Page 11 of 16

B43750, B43770 Extremely high ripple current 105 °C

Product safety

The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information".

Topic

Polarity

Mounting of single-ended capacitors

Soldering, cleaning agents Upper category temperature Passive flammability

More datasheets: B43770A5248M003 | B43770A9398M003 | B43770A5248M000 | B43750A4128M000 | B43770A5567M000 | B43750A5567M000 | B43770A4188M000 | B43750A9138M7 | B43750A5857M7 | B43750A4188M7

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B43770A5128M000 Datasheet file may be downloaded here without warranties.

Datasheet ID: B43770A5128M000 511462