B43454A9109M000

B43454A9109M000 Datasheet

B43454, B43474 November 2008

Part	Datasheet
B43454A9109M000	B43454A9109M000 (pdf)

Related Parts	Information
B43454A5828M000	B43454A5828M000
B43454A4278M	B43454A4278M
B43454A5228M000	B43454A5228M000
B43454B4478M000	B43454B4478M000
B43454A9398M	B43454A9398M
B43454A9158M	B43454A9158M
B43454A5278M000	B43454A5278M000
B43454A5398M000	B43454A5398M000
B43454A5478M000	B43454A5478M000
B43454A9688M000	B43454A9688M000
B43454A4828M	B43454A4828M
B43454A5338M000	B43454A5338M000
B43454A4568M	B43454A4568M
B43454A5688M000	B43454A5688M000
B43454A4109M000	B43454A4109M000
B43454A9828M000	B43454A9828M000
B43454A4129M	B43454A4129M
B43454A5568M000	B43454A5568M000
B43454A4688M	B43454A4688M
B43454A9478M000	B43454A9478M000
B43454A4158M	B43454A4158M
B43454A5158M000	B43454A5158M000
B43454B4228M000	B43454B4228M000
B43454A9108M000	B43454A9108M000
B43454A4228M000	B43454A4228M000
B43454A4478M000	B43454A4478M000
B43454A9228M000	B43454A9228M000
B43454A4338M000	B43454A4338M000
B43454A9278M	B43454A9278M
B43454A4398M	B43454A4398M
B43454A9338M000	B43454A9338M000
B43454A9568M000	B43454A9568M000
B43454A5108M000	B43454A5108M000

PDF Datasheet Preview
Aluminum electrolytic capacitors Capacitors with screw terminals Series/Type Date: B43454, B43474 November 2008 EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Capacitors with screw terminals Standard 85 °C General-purpose grade capacitors Applications Uninterruptible power supplies Frequency converters Features All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Construction Charge-discharge proof, polar Aluminum case with insulating sleeve Poles with screw terminal connections Mounting with ring clips, clamps or threaded stud The bases of types with threaded stud and d mm are not insulated B43454, B43474 B43454 B43474 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 16 B43454, B43474 Standard 85 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Leakage current Ileak 20 °C, 5 min 350 450 V DC VR 1000 12000 µF ±20% M Self-inductance ESL d = mm approx. 15 nH d mm approx. 20 nH Useful life Requirements: 85 °C VR IAC,R 40 °C VR IAC,R Voltage endurance test 85 °C VR Vibration resistance test > 5000 h ±30% of initial value > 75000 h ESR 3 times initial specified limit Ileak initial specified limit Post test requirements: 2000 h ±10% of initial value ESR times initial specified limit Ileak initial specified limit To IEC 60068-2-6, test Fc: Displacement amplitude mm, frequency range 10 55 Hz, acceleration max. 10 g, duration 3 x 2 h. Capacitor mounted by its Technical data and ordering codes Case 100 Hz dimensions 20 °C d x l VR = 350 V DC 1500 x 2200 x 2200 x 2700 x 3300 x 3900 x 4700 x 4700 x 5600 x 6800 x 8200 x 10000 x 12000 x VR = 400 V DC 1000 x 1500 x 2200 x 2700 x 3300 x 3900 x 4700 x 5600 x 6800 x 8200 x 10000 x ESRtyp ESRmax Zmax I AC,max AC,R Ordering code 100 Hz 100 Hz 10 kHz 100 Hz 100 Hz composition see below 20 °C 20 °C 20 °C 40 °C 85 °C 82 123 98 14 70 18 70 18 58 21 48 24 42 26 36 30 36 29 30 34 24 40 19 47 14 50 12 50 B4344A4158M000 B4344A4228M000 B4344B4228M000 B4344A4278M000 B4344A4338M000 B4344A4398M000 B4344A4478M000 B4344B4478M000 B4344A4568M000 B4344A4688M000 B4344A4828M000 B4344A4109M000 B4344A4129M000 99 149 119 12 76 114 91 15 74 18 62 21 52 24 42 28 34 32 28 37 25 40 22 46 19 50 B4344A9108M000 B4344A9158M000 B4344A9228M000 B4344A9278M000 B4344A9338M000 B4344A9398M000 B4344A9478M000 B4344A9568M000 B4344A9688M000 B4344A9828M000 B4344A9109M000 Composition of ordering code * = Mounting style 5 = for capacitors with ring clip/clamp mounting 7 = for capacitors with threaded stud Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 16 B43454, B43474 Standard 85 °C Technical data and ordering codes Case 100 Hz dimensions 20 °C d x l VR = 450 V DC 1000 x 1500 x 2200 x 2700 x 3300 x 3900 x 4700 x 5600 x 6800 x 8200 x ESRtyp ESRmax Zmax I AC,max AC,R Ordering code 100 Hz 100 Hz 10 kHz 100 Hz 100 Hz composition see below 20 °C 20 °C 20 °C 40 °C 85 °C 120 180 144 12 74 111 89 16 65 20 55 23 47 26 41 29 35 33 30 38 25 43 23 48 B4344A5108M000 B4344A5158M000 B4344A5228M000 B4344A5278M000 B4344A5338M000 B4344A5398M000 B4344A5478M000 B4344A5568M000 B4344A5688M000 B4344A5828M000 Composition of ordering code * = Mounting style 5 = for capacitors with ring clip/clamp mounting 7 = for capacitors with threaded stud Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 16 B43454, B43474 Standard 85 °C Useful life depending on ambient temperature TA under ripple current operating conditions1 Frequency factor of permissible ripple current IAC versus frequency f 1 Refer to chapter "General technical information, Calculation of useful life" on how to interpret the useful life graphs. Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 16 B43454, B43474 Standard 85 °C Frequency characteristics of ESR Typical behavior Impedance Z versus frequency f Typical behavior at 20 °C Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 16 B43454, B43474 Standard 85 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC . Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling Al electrolytic capacitors: Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 16 B43454, B43474 Standard 85 °C Product safety The table below summarize the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Polarity Mounting position of screw terminal capacitors Mounting of single-ended capacitors Robustness of terminals Soldering Safety information Reference Chapter "General technical information" Make sure that polar capacitors are connected 1 with the right polarity. "Basic construction of aluminum electrolytic capacitors" Voltages polarity classes should be prevented by connecting a diode. "Reverse voltage" Do not exceed the upper category temperatur. "Maximum permissible operating temperature" Make periodic inspections of the capacitors.

PDF Datasheet Preview

Aluminum electrolytic capacitors

Capacitors with screw terminals

Series/Type Date:

B43454, B43474 November 2008

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

Capacitors with screw terminals Standard 85 °C

General-purpose grade capacitors

Applications Uninterruptible power supplies Frequency converters

Features All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible

Construction Charge-discharge proof, polar Aluminum case with insulating sleeve Poles with screw terminal connections Mounting with ring clips, clamps or threaded stud The bases of types with threaded stud and d mm are not insulated

B43454, B43474

B43454

B43474

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 16

B43454, B43474 Standard 85 °C

Specifications and characteristics in brief

Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance

Leakage current Ileak 20 °C, 5 min
350 450 V DC VR 1000 12000 µF ±20% M

Self-inductance ESL
d = mm approx. 15 nH d mm approx. 20 nH

Useful life

Requirements:
85 °C VR IAC,R 40 °C VR IAC,R Voltage endurance test 85 °C VR

Vibration resistance test
> 5000 h
±30% of initial value
> 75000 h

ESR 3 times initial specified limit

Ileak
initial specified limit

Post test requirements:
2000 h
±10% of initial value

ESR times initial specified limit

Ileak
initial specified limit

To IEC 60068-2-6, test Fc:

Displacement amplitude mm, frequency range 10 55 Hz,
acceleration max. 10 g, duration 3 x 2 h. Capacitor mounted by its
Technical data and ordering codes

Case
100 Hz dimensions
20 °C d x l

VR = 350 V DC
1500 x 2200 x 2200 x 2700 x 3300 x 3900 x 4700 x 4700 x 5600 x 6800 x 8200 x 10000 x 12000 x

VR = 400 V DC
1000 x 1500 x 2200 x 2700 x 3300 x 3900 x 4700 x 5600 x 6800 x 8200 x 10000 x

ESRtyp ESRmax Zmax

I AC,max

AC,R
Ordering code
100 Hz 100 Hz 10 kHz 100 Hz 100 Hz composition see below
20 °C 20 °C 20 °C 40 °C 85 °C
82 123
98 14 70 18 70 18 58 21 48 24 42 26 36 30 36 29 30 34 24 40 19 47 14 50 12 50

B434*4A4158M000 B434*4A4228M000 B434*4B4228M000 B434*4A4278M000 B434*4A4338M000 B434*4A4398M000 B434*4A4478M000 B434*4B4478M000 B434*4A4568M000 B434*4A4688M000 B434*4A4828M000 B434*4A4109M000 B434*4A4129M000
99 149 119 12
76 114
91 15
74 18
62 21
52 24
42 28
34 32
28 37
25 40
22 46
19 50

B434*4A9108M000 B434*4A9158M000 B434*4A9228M000 B434*4A9278M000 B434*4A9338M000 B434*4A9398M000 B434*4A9478M000 B434*4A9568M000 B434*4A9688M000 B434*4A9828M000 B434*4A9109M000
Composition of ordering code * = Mounting style
5 = for capacitors with ring clip/clamp mounting 7 = for capacitors with threaded stud

Please read Cautions and warnings and Important notes at the end of this document.

Page 7 of 16

B43454, B43474 Standard 85 °C
Technical data and ordering codes

Case
100 Hz dimensions
20 °C d x l

VR = 450 V DC
1000 x 1500 x 2200 x 2700 x 3300 x 3900 x 4700 x 5600 x 6800 x 8200 x

ESRtyp ESRmax Zmax

I AC,max

AC,R
Ordering code
100 Hz 100 Hz 10 kHz 100 Hz 100 Hz composition see below
20 °C 20 °C 20 °C 40 °C 85 °C
120 180 144 12
74 111
89 16
65 20
55 23
47 26
41 29
35 33
30 38
25 43
23 48

B434*4A5108M000 B434*4A5158M000 B434*4A5228M000 B434*4A5278M000 B434*4A5338M000 B434*4A5398M000 B434*4A5478M000 B434*4A5568M000 B434*4A5688M000 B434*4A5828M000
Composition of ordering code * = Mounting style
5 = for capacitors with ring clip/clamp mounting 7 = for capacitors with threaded stud

Please read Cautions and warnings and Important notes at the end of this document.

Page 8 of 16

B43454, B43474 Standard 85 °C Useful life depending on ambient temperature TA under ripple current operating conditions1

Frequency factor of permissible ripple current IAC versus frequency f
1 Refer to chapter "General technical information, Calculation of useful life" on how to interpret the useful life graphs.

Please read Cautions and warnings and Important notes at the end of this document.

Page 9 of 16

B43454, B43474 Standard 85 °C Frequency characteristics of ESR Typical behavior

Impedance Z versus frequency f Typical behavior at 20 °C

Please read Cautions and warnings and Important notes at the end of this document.

Page 10 of 16

B43454, B43474 Standard 85 °C

Cautions and warnings

Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC .

Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited.

As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling Al electrolytic capacitors:

Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water.

Please read Cautions and warnings and Important notes at the end of this document.

Page 11 of 16

B43454, B43474 Standard 85 °C

Product safety

The table below summarize the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information".

Topic Polarity

Mounting position of screw terminal capacitors Mounting of single-ended capacitors

Robustness of terminals

Soldering

Safety information

Reference

Chapter "General technical information"

Make sure that polar capacitors are connected 1
with the right polarity.
"Basic construction of aluminum electrolytic
capacitors"

Voltages polarity classes should be prevented by
connecting a diode.
"Reverse voltage"

Do not exceed the upper category temperatur.
"Maximum permissible operating temperature"

Make periodic inspections of the capacitors.

More datasheets: 4N39S | 4N39SD | 4N39W | 4N40300 | 4N40300W | 4N403S | 4N403SD | 4N40SD | 4N40W | 4N40S

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B43454A9109M000 Datasheet file may be downloaded here without warranties.

Datasheet ID: B43454A9109M000 511439