B43310A5228M000

B43310A5228M000 Datasheet

B43310, B43330 Standard industrial 85 B43310, B43330 85

Part	Datasheet
B43310A5228M000	B43310A5228M000 (pdf)

Related Parts	Information
B43310A9159M000	B43310A9159M000
B43310C9228M000	B43310C9228M000
B43310A5398M000	B43310A5398M000
B43310A5278M000	B43310A5278M000
B43310A9398M000	B43310A9398M000
B43310A9228M000	B43310A9228M000
B43310A9109M000	B43310A9109M000
B43310A9568M000	B43310A9568M000
B43310A5338M000	B43310A5338M000
B43310A5129M000	B43310A5129M000
B43310A9338M000	B43310A9338M000
B43310A9688M000	B43310A9688M000
B43310A5568M000	B43310A5568M000
B43310A9828M000	B43310A9828M000
B43310A5688M000	B43310A5688M000
B43310A5828M000	B43310A5828M000
B43310A9129M000	B43310A9129M000
B43310A5109M000	B43310A5109M000
B43310A9278M000	B43310A9278M000
B43310A9478M000	B43310A9478M000
B43310A5478M000	B43310A5478M000
B43310A5188M000	B43310A5188M000

PDF Datasheet Preview
Aluminum electrolytic capacitors Capacitors with screw terminals Series/Type: Date: B43310, B43330 Standard industrial 85 B43310, B43330 85 August 2007 8 EPCOS Xiamen Co., Ltd Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS Page 1 of 13 Capacitors with screw terminals Standard industrial 85 General purpose grade capacitors B43310, B43330 Uninterruptible power supplies Frequency converters B43310 B43330 All-welded construction ensures reliable electrical contact High reliability and high ripple current capability Construction Charge-discharge proof, polar Aluminum case with insulating sleeve Poles with screw terminal connections Mounting with ring clips, clamps or threaded stud The bases of types with threaded stud and d mm are not insulated, types with d = mm have fully insulated bases. d mm Please read Cautions & warnings and Important notes at the end of this document. Published by EPCOS Xiamen Co., Ltd EPCOS Page 2 of 13 Standard industrial 85 B43310, B43330 Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Leakage current Ileak 20 5 minutes tan 20 °C, 120 Hz max. 20 °C, 120 Hz Load life 85 VR IAC,R 400 450 V DC • VR 1800 15000 µF ±20% M C•V [µA] or 5 mA whichever is smaller C•V [µA] 5 mA C = Rated Capacitance [µF], V = Rated Voltage [V] C = [µF], V = [V] 2000 h Less than ±15% of initial value Not more than 175% of specified value Ileak Technical data and ordering codes CR 120 Hz 20 µF Case dimensions dxl mm VR = 400 V DC 2200 x 130 2200 x 96 2700 x 96 3300 x 115 3900 x 130 4700 x 115 5600 x 130 6800 x 155 8200 x 157 10000 x 157 12000 x 196 15000 x 220 VR = 450 V DC 1800 x 130 2200 x 96 2700 x 115 3300 x 130 3900 x 115 4700 x 130 5600 x 155 6800 x 157 8200 x 157 10000 x 196 12000 x 220 ESRtyp 120 Hz 20 87 71 58 49 41 34 28 23 19 16 13 102 83 68 55 49 41 34 28 23 19 16 IAC,max 120 Hz 40 A IAC,R 120 Hz 85 A Ordering code composition see below B4330A9228M000 B4330C9228M000 B4330A9278M000 B4330A9338M000 B4330A9398M000 B4330A9478M000 B4330A9568M000 B4330A9688M000 B4330A9828M000 B4330A9109M000 B4330A9129M000 B4330A9159M000 B4330A5188M000 B4330A5228M000 B4330A5278M000 B4330A5338M000 B4330A5398M000 B4330A5478M000 B4330A5568M000 B4330A5688M000 B4330A5828M000 B4330A5109M000 B4330A5129M000 Composition of ordering code = Mounting style 1 = for capacitors with ring clip/clamp mounting 3 = for capacitors with threaded stud Please read Cautions & warnings and Important notes at the end of this document. Published by EPCOS Xiamen Co., Ltd EPCOS Page 6 of 13 Standard industrial 85 B43310, B43330 Load life depending on ambient temperature TA under ripple current operating conditions B43310/330 IAC,R KAL1126-P h 50000 h 25000 h 10000 h 5000 h 2000 h 80 90 Frequency factor of permissible ripple current IAC versus frequency f IAC f IAC, f IAC, 120 Hz B43310/330 KAL1125-G Hz 10 4 Please read Cautions & warnings and Important notes at the end of this document. Published by EPCOS Xiamen Co., Ltd EPCOS Page 7 of 13 Cautions and warnings Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC . Furthermore, part of the high-voltage electrolytes used by EPCOS is self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling Al electrolytic capacitors: Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Published by EPCOS Xiamen Co., Ltd EPCOS Page 8 of 13 Cautions and warnings Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of Data Book 2007 Aluminum Electrolytic Capacitors, chapter "General technical information". Topic Safety Information Reference Chapter ‘General technical information” Polarity Make sure that polar capacitors are 1 connected with the right polarity. “Basic construction of aluminum

PDF Datasheet Preview

Aluminum electrolytic capacitors

Capacitors with screw terminals

Series/Type:

Date:

B43310, B43330 Standard industrial 85 B43310, B43330 85

August 2007 8

EPCOS Xiamen Co., Ltd Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS

Page 1 of 13

Capacitors with screw terminals Standard industrial 85

General purpose grade capacitors

B43310, B43330

Uninterruptible power supplies Frequency converters

B43310 B43330

All-welded construction ensures reliable electrical contact High reliability and high ripple current capability

Construction

Charge-discharge proof, polar

Aluminum case with insulating sleeve

Poles with screw terminal connections

Mounting with ring clips, clamps or threaded stud The bases of types with threaded stud and d mm are not insulated, types with d = mm have fully insulated bases. d mm

Please read Cautions
& warnings and Important notes at the end of this document.

Published by EPCOS Xiamen Co., Ltd

EPCOS

Page 2 of 13

Standard industrial 85

B43310, B43330

Specifications and characteristics in brief

Rated voltage VR Surge voltage VS

Rated capacitance CR

Capacitance tolerance

Leakage current Ileak 20 5 minutes
tan 20 °C, 120 Hz max. 20 °C, 120 Hz

Load life
85 VR IAC,R
400 450 V DC
• VR 1800 15000 µF
±20% M

C•V [µA] or 5 mA whichever is smaller C•V [µA] 5 mA C = Rated Capacitance [µF], V = Rated Voltage [V] C = [µF], V = [V]
2000 h

Less than ±15% of initial value

Not more than 175% of specified value

Ileak
Technical data and ordering codes

CR 120 Hz 20 µF

Case dimensions dxl mm

VR = 400 V DC
2200 x 130 2200 x 96 2700 x 96 3300 x 115 3900 x 130 4700 x 115 5600 x 130 6800 x 155 8200 x 157 10000 x 157 12000 x 196 15000 x 220

VR = 450 V DC
1800 x 130 2200 x 96 2700 x 115 3300 x 130 3900 x 115 4700 x 130 5600 x 155 6800 x 157 8200 x 157 10000 x 196 12000 x 220

ESRtyp 120 Hz 20
87 71 58 49 41 34 28 23 19 16 13
102 83 68 55 49 41 34 28 23 19 16

IAC,max 120 Hz 40 A

IAC,R 120 Hz 85 A
Ordering code composition see below

B433*0A9228M000 B433*0C9228M000 B433*0A9278M000 B433*0A9338M000 B433*0A9398M000 B433*0A9478M000 B433*0A9568M000 B433*0A9688M000 B433*0A9828M000 B433*0A9109M000 B433*0A9129M000 B433*0A9159M000

B433*0A5188M000 B433*0A5228M000 B433*0A5278M000 B433*0A5338M000 B433*0A5398M000 B433*0A5478M000 B433*0A5568M000 B433*0A5688M000 B433*0A5828M000 B433*0A5109M000 B433*0A5129M000
Composition of ordering code
* = Mounting style 1 = for capacitors with ring clip/clamp mounting 3 = for capacitors with threaded stud

Please read Cautions
& warnings and Important notes at the end of this document.

Published by EPCOS Xiamen Co., Ltd

EPCOS

Page 6 of 13

Standard industrial 85

B43310, B43330

Load life depending on ambient temperature TA under ripple current operating conditions

B43310/330

IAC,R

KAL1126-P
h 50000 h 25000 h 10000 h 5000 h 2000 h
80 90

Frequency factor of permissible ripple current IAC versus frequency f IAC f

IAC, f IAC, 120 Hz

B43310/330

KAL1125-G

Hz 10 4

Please read Cautions
& warnings and Important notes at the end of this document.

Published by EPCOS Xiamen Co., Ltd

EPCOS

Page 7 of 13

Cautions and warnings

Personal safety

The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC .

Furthermore, part of the high-voltage electrolytes used by EPCOS is self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited.

As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling Al electrolytic capacitors:

Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water.

Published by EPCOS Xiamen Co., Ltd EPCOS

Page 8 of 13

Cautions and warnings

Product safety

The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of Data Book 2007 Aluminum Electrolytic Capacitors, chapter "General technical information".

Topic

Safety Information

Reference Chapter ‘General technical information”

Polarity

Make sure that polar capacitors are 1 connected with the right polarity. “Basic construction of aluminum

More datasheets: B43310A9688M000 | B43310A5568M000 | B43310A9828M000 | B43310A5688M000 | B43310A5828M000 | B43310A9129M000 | B43310A5109M000 | B43310A9278M000 | B43310A9478M000 | B43310A5478M000

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B43310A5228M000 Datasheet file may be downloaded here without warranties.

Datasheet ID: B43310A5228M000 511438