B43088A2336M

B43088A2336M Datasheet


B43088 December 2010

Part Datasheet
B43088A2336M B43088A2336M B43088A2336M (pdf)
Related Parts Information
B43088A5685M B43088A5685M B43088A5685M
B43088A9106M B43088A9106M B43088A9106M
B43088A9226M B43088A9226M B43088A9226M
B43088A9336M B43088A9336M B43088A9336M
B43088A9476M B43088A9476M B43088A9476M
B43088A9685M B43088A9685M B43088A9685M
B43088B9226M B43088B9226M B43088B9226M
B43088A2686M B43088A2686M B43088A2686M
B43088F2336M B43088F2336M B43088F2336M
B43088A9686M B43088A9686M B43088A9686M
B43088F2476M B43088F2476M B43088F2476M
B43088F2686M B43088F2686M B43088F2686M
B43088A4226M B43088A4226M B43088A4226M
B43088A4106M B43088A4106M B43088A4106M
B43088A2226M B43088A2226M B43088A2226M
B43088A2107M B43088A2107M B43088A2107M
B43088A2106M B43088A2106M B43088A2106M
B43088F2226M B43088F2226M B43088F2226M
B43088A5106M B43088A5106M B43088A5106M
B43088A4685M B43088A4685M B43088A4685M
B43088A4336M B43088A4336M B43088A4336M
B43088A5336M B43088A5336M B43088A5336M
B43088A5476M B43088A5476M B43088A5476M
B43088A2476M B43088A2476M B43088A2476M
B43088A4686M B43088A4686M B43088A4686M
B43088A4476M B43088A4476M B43088A4476M
B43088F2106M B43088F2106M B43088F2106M
B43088A5226M B43088A5226M B43088A5226M
PDF Datasheet Preview
Aluminum electrolytic capacitors

Single-ended capacitors

Series/Type Date:

B43088 December 2010

The following products presented in this data sheet are being withdrawn.
Ordering Code B43088*

Substitute Product B43821

Date of Withdrawal
2013-02-22

Deadline Last Orders
2013-09-30

Last Shipments 2014-03-31

For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Single-ended capacitors High temperature 105 °C

Long-life grade capacitors for professional applications

Applications Electronic ballast applications

Features RoHS-compatible High ripple current High reliability Useful life up to 12000 h at 105 °C

Construction Radial leads Aluminum case, fully insulated Charge-discharge proof Minus pole marking on the insulating sleeve Case with safety vent

Delivery mode Bulk Taped, Ammo pack Cut see chapter "Single-ended Taping, packing and lead configurations, Cut leads Chapter A " Kinked see chapter "Single-ended Taping, packing and lead configurations, Kinked leads Chapter A "

Refer to chapter "Single-ended capacitors Taping, packing and lead configurations" for further details.

B43088

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 32

B43088 High temperature 105 °C

Specifications and characteristics in brief

Rated voltage VR Surge voltage VS
200 450 V DC

VR 250 V DC VR at room temperature VR > 250 V DC VR at room temperature

Rated capacitance CR Capacitance tolerance
100 µF ±20% M

Dissipation factor max. 20 °C, 120 Hz

VR V DC tan

Leakage current Ileak 20 °C, after 5 minutes

Useful life 105 °C VR IAC,R
> 10000 h for d = mm > 12000 h for d mm

Requirements

Shelf life

Low temperature stability impedance ratio 120 Hz
±20% of initial value
tan 2 times initial specified limit

Ileak
initial specified limit

After storage for 1000 h at 105 °C, the capacitors shall meet the
requirement of load life test after reforming process. After test VR
Technical data and ordering codes

CR 120 Hz, 20 °C µF

VR = 200 V DC
10 22 33 47 68 100

VR = 250 V DC
10 22 33 47 68

VR = 350 V DC
10 22 33 47 68

VR = 400 V DC
10 22 33 47 68

Case dimensions dxl mm

IAC,R 100 kHz, 105 °C mA
Ordering code composition see below
10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25
250 500 600 700 760 1120

B43088A2106M*** B43088A2226M*** B43088A2336M*** B43088A2476M*** B43088A2686M*** B43088A2107M***
10 x 20
16 x 20
16 x 25

B43088F2106M*** B43088F2226M*** B43088F2336M*** B43088F2476M*** B43088F2686M***
10 x 16
10 x 20
16 x 20
16 x 25

B43088A4685M*** B43088A4106M*** B43088A4226M*** B43088A4336M*** B43088A4476M*** B43088A4686M***
10 x 16 10 x 20 x 25 16 x 20 16 x 25 16 x 18 x
220 280 430 640 840 1000

B43088B9685M*** B43088B9106M*** B43088A9226M*** B43088B9226M*** B43088A9336M*** B43088A9476M*** B43088A9686M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 008 = for taped leads, Ammo pack, lead spacing F = mm for 10 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and
18 x mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 6 of 32

B43088 High temperature 105 °C
Technical data and ordering codes

CR 120 Hz, 20 °C µF

VR = 450 V DC
10 22 33 47

Case dimensions dxl mm

IAC,R 100 kHz, 105 °C mA
Ordering code composition see below
10 x 20
16 x 25

B43088A5685M*** B43088A5106M*** B43088A5226M*** B43088A5336M*** B43088A5476M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk 002 = for cut leads, bulk 008 = for taped leads, Ammo pack, lead spacing F = mm for 10 mm 009 = for taped leads, Ammo pack, lead spacing F = mm for d x l = 16 x 20 16 x mm and
18 x mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 7 of 32

B43088 High temperature 105 °C

Useful life depending on ambient temperature TA under ripple current operating conditions1 d = 10 mm

Useful life depending on ambient temperature TA under ripple current operating conditions1
1 Refer to chapter "General technical information, Calculation of useful life" for an explanation on how to interpret the useful life graphs.

Please read Cautions and warnings and Important notes at the end of this document.

Page 8 of 32

B43088 High temperature 105 °C

Frequency factor of permissible ripple current IAC versus frequency f

Please read Cautions and warnings and Important notes at the end of this document.

Page 9 of 32

B43088 High temperature 105 °C

Taping, packing and lead configurations

Taping

Single-ended capacitors are available taped in Ammo pack from diameter 4 to 18 mm as follows Lead spacing F = mm d = 4 5 mm Lead spacing F = mm d = 4 mm Lead spacing F = mm d = 8 mm Lead spacing F = mm d = 4 mm Lead spacing F = mm d = 16 18 mm .
Lead spacing mm d = 4 5 mm Last 3 digits of ordering code 016

Dimensions in mm

W0 W1 W2 P
min.
max.
max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 10 of 32
Lead spacing mm d = 4 mm Last 3 digits of ordering code 007

B43088 High temperature 105 °C

Dimensions in mm

W W0 W1 W2 H0 P

P0 P1 I1

Tolerrance
min.
max.
max.
max.
Lead spacing mm d = 8 mm Last 3 digits of ordering code 006

Dimensions in mm

W0 W1 W2 P

Tolerance
min.
max.
max.
max.

Leads can also run straight through the taping area. Taping is available up to dimensions d x l = 8 x 15 mm.

Please read Cautions and warnings and Important notes at the end of this document.

Page 11 of 32

B43088 High temperature 105 °C
Lead spacing mm d = 4 8 mm Last 3 digits of ordering code 008
Lead spacing mm d = 10 mm Last 3 digits of ordering code 008

Dimensions in mm

W W0 W1 W2 H0 P

Tolerance
min. max.
max.
max.

Taping is available up to dimensions d x l = 10 x mm and x 25 mm. Taping is not available for d x l = 8 x 20 mm.

Please read Cautions and warnings and Important notes at the end of this document.

Page 12 of 32
Lead spacing mm d = 16 mm Last 3 digits of ordering code 009

B43088 High temperature 105 °C

Dimensions in mm

W0 W1 W2 P

Tolerance
min.
max.
max.

Taping is available up to dimensions d x l = 16 x mm and 18 x mm.

Please read Cautions and warnings and Important notes at the end of this document.

Page 13 of 32

B43088 High temperature 105 °C

Cut or kinked leads Single-ended capacitors are available with cut or kinked leads. Other lead configurations also available upon request.
Cut leads Chapter A Available for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088, B43827, B43828. Last 3 digits of ordering code 002

Case size d x l mm
4 x7 5 x7 5 x 11 x 7 x 11 8 x7 8 x 8 x 15 8 x 20 10 x 10 x 16 10 x 20 10 x 25 10 x

Dimensions mm a

Case size d x l mm
x 16 x 20 x 25 x 40 16 x 20 16 x 25 16 x 16 x 16 x 40 18 x 20 18 x 25 18 x 18 x 18 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 14 of 32

B43088 High temperature 105 °C
Cut leads Chapter B Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Last 3 digits of ordering code 002

With stand-off rubber seal With flat rubber seal

Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 15 of 32

B43088 High temperature 105 °C
Kinked leads Chapter A Available for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088, B43827, B43828. Last 3 digits of ordering code 001

Case size d x l mm
4 x7 5 x7 5 x 11 x 7 x 11 8 x7 8 x 8 x 15 8 x 20 10 x 10 x 16 10 x 20 10 x 25 10 x

Dimensions mm a

Case size d x l mm
x 16 x 20 x 25 x 40 16 x 20 16 x 25 16 x 16 x 16 x 40 18 x 20 18 x 25 18 x 18 x 18 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 16 of 32

B43088 High temperature 105 °C
Kinked leads Chapter B Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896. Last 3 digits of ordering code 001

With stand-off rubber seal With flat rubber seal

Case size d x l mm 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 17 of 32

B43088 High temperature 105 °C

These lead configurations ensure correct placement of the capacitor on the PCB with regard to polarity. PAPR leads are available for diameters from 10 mm up to 18 mm. There are three configurations available Crimped leads, J leads, bent 90° leads

Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896.
Crimped leads Last 3 digits of ordering code 003

With stand-off rubber seal

With flat rubber seal

Suggestion for PCB hole diameter

Case size d x l mm 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 18 of 32
J leads Last 3 digits of ordering code 004

B43088 High temperature 105 °C

Suggestion for PCB hole diameter

Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35

Dimensions mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 19 of 32

B43088 High temperature 105 °C
Bent 90° leads for horizontal mounting pinning Last 3 digits of ordering code 012

Case size d x l mm 16 x 20 16 x 25 16 x 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm

Bent leads for diameter mm available upon request.

Please read Cautions and warnings and Important notes at the end of this document.

Page 20 of 32

B43088 High temperature 105 °C

Packing units and box dimensions

Ammo pack Valid for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088, B43827, B43828.

Case size dxl mm 4x7 5x7 5 x 11 x 7 x 11 8x7 8 x 8 x 15 10 x 10 x 16 10 x 20 x 20 x 25 16 x 25 16 x 18 x 20 18 x 25 18 x

Dimensions mm

Amax 330

Bmax 50

Cmax 196
330 50 226
330 50 226
330 50 286
330 50 286
330 50 246
330 50 246
330 50 246
330 50 196
330 54 196
330 58 196
341 60 272
341 65 272
320 65 270
315 65 275
315 65 275
315 65 275
315 65 275

Packing units pcs. 2000 1000
500 300 250

Please read Cautions and warnings and Important notes at the end of this document.

Page 21 of 32

B43088 High temperature 105 °C

Ammo pack

Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896.

Case size dxl mm 8 x 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x

Dimensions mm

Amax 345
4 x7 5 x7 5 x 11 x 7 x 11 8 x7 8 x 8 x 15 8 x 20 10 x 10 x 16 10 x 20 10 x 25 x 16 x 20 x 25 x 40 16 x 20 16 x 25 16 x 16 x 16 x 40 The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 10000
7500 5000 2500 2000 1500 2000 1500 1000
750 500 375 250 000

Taped,

Kinked leads,

Ammo pack
bulk
pcs.
pcs.
2000
15000
2000
10000
2000
10000
2000
10000
2000
5000
1000
5000
1000
4000
1000
2500
2000
2500
2000
1500
1250
1000

Code F mm d mm 001
16 18

Cut leads, bulk pcs. 15000 10000
5000 4000 2500 2000 2500 2000 1500 1250 1000
500 750 500 375 002

Please read Cautions and warnings and Important notes at the end of this document.

Page 23 of 32

B43088 High temperature 105 °C

Overview of packing units and code numbers for case sizes 18 x 20 18 x 40
Case size dxl mm 18 x 20 18 x 25 18 x 18 x 18 x 40 The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs.
250 000

Taped, Ammo pack
pcs.

Code F mm d mm
16 18

Kinked leads, bulk pcs.
100 001

Cut leads, bulk pcs.
100 002

Please read Cautions and warnings and Important notes at the end of this document.

Page 24 of 32

B43088 High temperature 105 °C

Overview of packing units and code numbers for case sizes 8 x 16 x

Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896.

Case size dxl
mm 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x 16 x The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 1000 500 350 250 200 175 250 200 100 000

Taped, Ammo pack
pcs.
1000

Code F mm d mm
006 008 5 009

Kinked leads, bulk pcs. 500 350 500 200 250 100 001

PAPR

Cut Crimped J leads, Bent 90°
leads, leads, blister leads,
bulk blister
blister
pcs. pcs.
pcs. pcs.
1000
1000
200 120
200 120
250 344
344 120
100 150
002 003
004 012
1 Available upon request

Please read Cautions and warnings and Important notes at the end of this document.

Page 25 of 32

B43088 High temperature 105 °C

Overview of packing units and code numbers for case sizes 18 x 20 18 x 40

Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824, B42851, B43866, B43867, B43890, B43896.

Case size dxl
mm 18 x 20 18 x 25 18 x 18 x 35 18 x 40 The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 175 150 100 125 000

Taped, Ammo pack
pcs. 250 Code F mm d mm 009

Kinked leads, bulk pcs. 175 150 100 001

PAPR

Cut Crimped J leads, Bent 90°
leads, leads, blister leads,
bulk blister
blister
pcs. pcs.
pcs. pcs.
175 200
200 120
150 200
200 120
100 150
150 120
100 150
100 120
002 003
004 012

Please read Cautions and warnings and Important notes at the end of this document.

Page 26 of 32

B43088 High temperature 105 °C

Cautions and warnings

Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC .

Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited.

As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors:

Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water.

Please read Cautions and warnings and Important notes at the end of this document.

Page 27 of 32

B43088 High temperature 105 °C

Product safety

The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information".

Topic Polarity

Mounting position of screwterminal capacitors Mounting of single-ended capacitors

Robustness of terminals

Soldering

Safety information

Reference
More datasheets: B43088A4106M | B43088A2226M | B43088A2107M | B43088A2106M | B43088F2226M | B43088A5106M | B43088A4685M | B43088A4336M | B43088A5336M | B43088A5476M


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B43088A2336M Datasheet file may be downloaded here without warranties.

Datasheet ID: B43088A2336M 511435