B41889A4108M

B41889A4108M Datasheet

B41889 November 2008

Part	Datasheet
B41889A4108M	B41889A4108M (pdf)

Related Parts	Information
B41889A3158M	B41889A3158M
B41889A2827M8	B41889A2827M8
B41889A2827M	B41889A2827M
B41889A4687M8	B41889A4687M8
B41889A4108M8	B41889A4108M8
B41889A2108M8	B41889A2108M8
B41889A3108M8	B41889A3108M8
B41889A2228M8	B41889A2228M8
B41889A2228M	B41889A2228M
B41889A4158M8	B41889A4158M8
B41889A4687M	B41889A4687M
B41889A3687M8	B41889A3687M8
B41889A4158M	B41889A4158M
B41889A2158M8	B41889A2158M8
B41889A3158M8	B41889A3158M8
B41889A2687M8	B41889A2687M8
B41889A2687M	B41889A2687M
B41889A4477M8	B41889A4477M8
B41889A2128M8	B41889A2128M8
B41889A4477M	B41889A4477M
B41889A3228M	B41889A3228M
B41889A3228M8	B41889A3228M8
B41889A4228M8	B41889A4228M8
B41889A3477M8	B41889A3477M8
B41889A2128M	B41889A2128M
B41889A4228M	B41889A4228M
B41889A3477M	B41889A3477M
B41889A3687M	B41889A3687M
B41889A2108M	B41889A2108M
B41889A3108M	B41889A3108M
B41889A2158M	B41889A2158M

PDF Datasheet Preview
Aluminum electrolytic capacitors Single-ended capacitors Series/Type Date: B41889 November 2008 EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Single-ended capacitors Very low impedance 105 °C General-purpose grade capacitors Applications For use in output circuits of switch-mode power supplies of compact design For professional industrial electronics, telecommunications and data processing equipment Features Very low impedance at high frequency Very low equivalent series resistance ESR High ripple current capability RoHS-compatible Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve Delivery mode Terminal configurations and packing: Refer to chapter "Single-ended capacitors Taping, packing and lead configurations" for further details and ordering example. B41889 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 25 B41889 Very low impedance 105 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan 20 °C, 120 Hz 16 V DC VR 470 2200 µF ±20% M For capacitance higher than 1000 µF add for every increase of 1000 µF. Leakage current Ileak 20 °C, 5 min Self-inductance ESL Useful life 105 °C VR IAC,R Requirements Voltage endurance test 105 °C VR Post test requirements Vibration resistance test IEC climatic category Sectional specification VR V DC tan max. 20 nH > 2000 h tan Ileak ±30% of initial value 2 times initial specified limit initial specified limit 2000 h ±30% of initial value tan 2 times initial specified limit Ileak initial specified limit To IEC 60068-2-6, test Fc: Displacement amplitude mm, frequency range 10 2000 Hz, acceleration max. 20 g, duration 3 x 2 h. Capacitor rigidly clamped by the aluminum case. To IEC 60068-1 40/105/56 °C/+105 °C/56 days damp heat test IEC 60384-4 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 25 B41889 Very low impedance 105 °C Dimensional drawings With stand-off rubber seal Diameters mm 10, With flat rubber seal Diameter mm 8 Dimensions and weights Dimensions mm d 8 10 l 16 20 25 Approx. weight g Please read Cautions and warnings and Important notes at the end of this document. Technical data and ordering codes Case 120 Hz dimensions 20 °C d x l VR = V DC 1000 10 x 1200 10 x 16 1500 10 x 16 2200 10 x 20 VR = 10 V DC 680 10 x 1000 10 x 16 1500 10 x 20 2200 x 25 VR = 16 V DC 470 10 x 680 10 x 16 1000 10 x 16 1500 10 x 20 2200 x 25 ESRmax 120 Hz 20 °C ESRmax 10 kHz 20 °C ESRmax IAC,R IAC,max Ordering code 100 kHz 100 kHz 100 kHz composition see 20 °C 105 °C 85 °C below 1140 1596 B41889A2687M* 1140 1596 B41889A2827M* 1540 2156 B41889A2108M* 2000 2800 B41889A2128M* 2000 2800 B41889A2158M* 2550 3570 B41889A2228M* 1140 1596 B41889A3477M* 1540 2156 B41889A3687M* 2000 2800 B41889A3108M* 2550 3570 B41889A3158M* 2800 3920 B41889A3228M* 1540 2156 B41889A4477M* 2000 2800 B41889A4687M* 2000 2800 B41889A4108M* 2550 3570 B41889A4158M* 2800 3920 B41889A4228M* Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to x 25 mm 002 = for cut leads, bulk for 10 mm 004 = for J leads, blister from d x l = 10 x mm to x 25 mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 8 x mm to x 25 mm Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 25 B41889 Very low impedance 105 °C Useful life depending on ambient temperature TA under ripple current operating conditions1 Frequency factor of permissible ripple current IAC versus frequency f 1 Refer to chapter "General technical information, Calculation of useful life" for an explanation on how to interpret the useful life graphs. Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 25 B41889 Very low impedance 105 °C Taping, packing and lead configurations Taping Single-ended capacitors are available taped in Ammo pack from diameter 5 to 18 mm as follows Lead spacing F = mm d = 5 mm Lead spacing F = mm d = 8 mm Lead spacing F = mm from d x l = 10 x mm to x 30 mm Lead spacing F = mm d = 16 18 mm . Lead spacing mm d = 5 mm Last 3 digits of ordering code 007 Dimensions in mm W W0 W1 W2 H0 P P0 P1 I1 Tolerance min. max. max. max. Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 25 Lead spacing mm d = 8 mm Last 3 digits of ordering code 006 B41889 Very low impedance 105 °C Dimensions in mm W0 W1 W2 P Tolerance min. max. max. max. Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 25 B41889 Very low impedance 105 °C Lead spacing mm d = 5 8 mm Last 3 digits of ordering code 008 Lead spacing mm from d x l = 10 x mm to x 30 mm Last 3 digits of ordering code 008 Dimensions in mm W W0 W1 W2 H0 Tolerance min. max. max. max. Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 25 Lead spacing mm d = 16 mm Last 3 digits of ordering code 009 B41889 Very low impedance 105 °C Dimensions in mm W0 W1 W2 P Tolerance min. max. max. * Available only for case dimensions 18 x 20, 18 x 25 and 18 x mm Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 25 B41889 Very low impedance 105 °C Packing units and box dimensions Ammo pack Case size dxl mm 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x Dimensions mm Amax 345 Bmax 55 Cmax 240 345 55 290 345 55 240 345 55 280 345 60 200 345 60 200 345 65 280 345 65 280 315 65 275 315 65 275 315 65 275 315 65 275 315 65 275 315 65 275 Packing units pcs. 2000 1000 750 500 300 250 Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 25 B41889 Very low impedance 105 °C Kinked or cut leads Single-ended capacitors are available with kinked or cut leads. Other lead configurations also available upon request. Kinked leads Last 3 digits of ordering code 001 With stand-off rubber seal With flat rubber seal Case size d x l mm 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 25 B41889 Very low impedance 105 °C Cut leads Last 3 digits of ordering code 002 With stand-off rubber seal With flat rubber seal Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 30 20 x 35 20 x 40 22 x 30 22 x 35 22 x 40 Dimensions mm a Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 25 B41889 Very low impedance 105 °C These lead configurations ensure correct placement of the capacitor on the PCB with regard to polarity. PAPR leads are available for diameters from 10 mm up to 20 mm. There are three configurations available Crimped leads, J leads, bent 90° leads Crimped leads Last 3 digits of ordering code 003 With stand-off rubber seal With flat rubber seal Suggestion for PCB hole diameter Case size d x l mm 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 30 20 x 35 20 x 40 Dimensions mm Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 25 B41889 Very low impedance 105 °C J leads Last 3 digits of ordering code 004 Suggestion for PCB hole diameter Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 Dimensions mm Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 25 B41889 Very low impedance 105 °C Bent 90° leads for horizontal mounting pinning Last 3 digits of ordering code 012 Case size d x l mm 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 Dimensions mm Bent leads for diameter mm available upon request. Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 25 B41889 Very low impedance 105 °C Overview of packing units and code numbers for case sizes 5 x 11 16 x Case size dxl mm 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 2000 2500 1000 500 350 250 200 175 250 200 000 Taped, Ammo pack pcs. 2000 2000 1000 Code F mm d mm 006 007 008 5 009 Kinked leads, bulk pcs. PAPR Cut Crimped J leads, Bent 90° leads, leads, blister leads, bulk blister blister pcs. pcs. pcs. pcs. 1000 1000 200 120 200 120 250 344 344 120 002 003 004 012 1 Available upon request Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 25 B41889 Very low impedance 105 °C Overview of packing units and code numbers for case sizes 18 x 20 25 x 40 Case size dxl mm 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 30 20 x 35 20 x 40 22 x 30 22 x 35 22 x 40 25 x 40 The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 175 150 100 125 100 80 40 000 Taped, Kinked Ammo pack leads, bulk pcs. pcs. Code F mm d mm 001 007 008 5 009 PAPR Cut Crimped J leads, Bent 90° leads, leads, blister leads, bulk blister blister pcs. pcs. pcs. pcs. 175 200 200 120 150 200 200 120 100 150 150 120 100 150 100 120 125 200 125 200 100 120 100 120 100 120 002 003 004 012 Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 25 B41889 Very low impedance 105 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC . Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling Al electrolytic capacitors: Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document.

PDF Datasheet Preview

Aluminum electrolytic capacitors

Single-ended capacitors

Series/Type Date:

B41889 November 2008

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

Single-ended capacitors Very low impedance 105 °C

General-purpose grade capacitors

Applications For use in output circuits of switch-mode power supplies of compact design For professional industrial electronics, telecommunications and data processing equipment

Features Very low impedance at high frequency Very low equivalent series resistance ESR High ripple current capability RoHS-compatible

Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve

Delivery mode Terminal configurations and packing:
Refer to chapter "Single-ended capacitors Taping, packing and lead configurations" for further details and ordering example.

B41889

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 25

B41889 Very low impedance 105 °C

Specifications and characteristics in brief

Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance

Dissipation factor tan 20 °C, 120 Hz
16 V DC VR 470 2200 µF ±20% M For capacitance higher than 1000 µF add for every increase of 1000 µF.

Leakage current Ileak 20 °C, 5 min Self-inductance ESL Useful life 105 °C VR IAC,R Requirements

Voltage endurance test 105 °C VR Post test requirements

Vibration resistance test

IEC climatic category Sectional specification

VR V DC
tan max.
20 nH
> 2000 h
tan Ileak
±30% of initial value 2 times initial specified limit initial specified limit
2000 h
±30% of initial value
tan 2 times initial specified limit

Ileak
initial specified limit

To IEC 60068-2-6, test Fc:

Displacement amplitude mm, frequency range 10 2000 Hz,
acceleration max. 20 g, duration 3 x 2 h.

Capacitor rigidly clamped by the aluminum case.

To IEC 60068-1 40/105/56 °C/+105 °C/56 days damp heat test

IEC 60384-4

Please read Cautions and warnings and Important notes at the end of this document.

Page 3 of 25

B41889 Very low impedance 105 °C

Dimensional drawings

With stand-off rubber seal Diameters mm 10,

With flat rubber seal Diameter mm 8

Dimensions and weights

Dimensions mm d 8 10
l 16 20 25

Approx. weight g

Please read Cautions and warnings and Important notes at the end of this document.
Technical data and ordering codes

Case
120 Hz dimensions
20 °C d x l

VR = V DC
1000 10 x
1200 10 x 16
1500 10 x 16
2200 10 x 20

VR = 10 V DC
680 10 x
1000 10 x 16
1500 10 x 20
2200 x 25

VR = 16 V DC
470 10 x 680 10 x 16 1000 10 x 16 1500 10 x 20 2200 x 25

ESRmax 120 Hz 20 °C

ESRmax 10 kHz 20 °C

ESRmax IAC,R
IAC,max Ordering code
100 kHz 100 kHz 100 kHz composition see
20 °C 105 °C 85 °C below
1140 1596 B41889A2687M*** 1140 1596 B41889A2827M*** 1540 2156 B41889A2108M*** 2000 2800 B41889A2128M*** 2000 2800 B41889A2158M*** 2550 3570 B41889A2228M***
1140 1596 B41889A3477M*** 1540 2156 B41889A3687M*** 2000 2800 B41889A3108M*** 2550 3570 B41889A3158M*** 2800 3920 B41889A3228M***
1540 2156 B41889A4477M*** 2000 2800 B41889A4687M*** 2000 2800 B41889A4108M*** 2550 3570 B41889A4158M*** 2800 3920 B41889A4228M***
Composition of ordering code
*** = Version
000 = for standard leads, bulk 001 = for kinked leads, bulk from d x l = 10 x 20 mm to x 25 mm 002 = for cut leads, bulk for 10 mm 004 = for J leads, blister from d x l = 10 x mm to x 25 mm 008 = for taped leads, Ammo pack, lead spacing F = mm from d x l = 8 x mm to x 25 mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 6 of 25

B41889 Very low impedance 105 °C Useful life depending on ambient temperature TA under ripple current operating conditions1

Frequency factor of permissible ripple current IAC versus frequency f
1 Refer to chapter "General technical information, Calculation of useful life" for an explanation on how to interpret the useful life graphs.

Please read Cautions and warnings and Important notes at the end of this document.

Page 7 of 25

B41889 Very low impedance 105 °C

Taping, packing and lead configurations

Taping

Single-ended capacitors are available taped in Ammo pack from diameter 5 to 18 mm as follows Lead spacing F = mm d = 5 mm Lead spacing F = mm d = 8 mm Lead spacing F = mm from d x l = 10 x mm to x 30 mm Lead spacing F = mm d = 16 18 mm .
Lead spacing mm d = 5 mm Last 3 digits of ordering code 007

Dimensions in mm

W W0 W1 W2 H0 P

P0 P1 I1

Tolerance
min.
max.
max.
max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 8 of 25
Lead spacing mm d = 8 mm Last 3 digits of ordering code 006

B41889 Very low impedance 105 °C

Dimensions in mm

W0 W1 W2 P

Tolerance
min.
max.
max.
max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 9 of 25

B41889 Very low impedance 105 °C
Lead spacing mm d = 5 8 mm Last 3 digits of ordering code 008
Lead spacing mm from d x l = 10 x mm to x 30 mm Last 3 digits of ordering code 008

Dimensions in mm

W W0 W1 W2 H0

Tolerance
min. max.
max. max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 10 of 25
Lead spacing mm d = 16 mm Last 3 digits of ordering code 009

B41889 Very low impedance 105 °C

Dimensions in mm

W0 W1 W2 P

Tolerance
min.
max.
max.
* Available only for case dimensions 18 x 20, 18 x 25 and 18 x mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 11 of 25

B41889 Very low impedance 105 °C

Packing units and box dimensions Ammo pack

Case size dxl mm 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x

Dimensions mm

Amax 345

Bmax 55

Cmax 240
345 55 290
345 55 240
345 55 280
345 60 200
345 60 200
345 65 280
345 65 280
315 65 275
315 65 275
315 65 275
315 65 275
315 65 275
315 65 275

Packing units pcs. 2000 1000
750 500 300 250

Please read Cautions and warnings and Important notes at the end of this document.

Page 12 of 25

B41889 Very low impedance 105 °C

Kinked or cut leads

Single-ended capacitors are available with kinked or cut leads. Other lead configurations also available upon request.
Kinked leads Last 3 digits of ordering code 001

With stand-off rubber seal With flat rubber seal

Case size d x l mm 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 13 of 25
B41889 Very low impedance 105 °C Cut leads Last 3 digits of ordering code 002 With stand-off rubber seal

With flat rubber seal

Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 30 20 x 35 20 x 40 22 x 30 22 x 35 22 x 40

Dimensions mm a

Please read Cautions and warnings and Important notes at the end of this document.

Page 14 of 25

B41889 Very low impedance 105 °C

These lead configurations ensure correct placement of the capacitor on the PCB with regard to polarity. PAPR leads are available for diameters from 10 mm up to 20 mm. There are three configurations available Crimped leads, J leads, bent 90° leads
Crimped leads Last 3 digits of ordering code 003

With stand-off rubber seal

With flat rubber seal

Suggestion for PCB hole diameter

Case size d x l mm 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 30 20 x 35 20 x 40

Dimensions mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 15 of 25
B41889 Very low impedance 105 °C J leads Last 3 digits of ordering code 004

Suggestion for PCB hole diameter

Case size d x l mm 10 x 10 x 16 10 x 20 x 20 x 25 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35

Dimensions mm

Please read Cautions and warnings and Important notes at the end of this document.

Page 16 of 25

B41889 Very low impedance 105 °C
Bent 90° leads for horizontal mounting pinning Last 3 digits of ordering code 012

Case size d x l mm 16 x 20 16 x 25 16 x 18 x 20 18 x 25 18 x 18 x 35 18 x 40

Dimensions mm

Bent leads for diameter mm available upon request.

Please read Cautions and warnings and Important notes at the end of this document.

Page 17 of 25

B41889 Very low impedance 105 °C

Overview of packing units and code numbers for case sizes 5 x 11 16 x

Case size dxl
mm 5 x 11 x 11 8 x 10 x 10 x 16 10 x 20 x 20 x 25 x 30 x 35 x 40 16 x 20 16 x 25 16 x The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 2000 2500 1000 500 350 250 200 175 250 200 000

Taped, Ammo pack
pcs.
2000
2000
1000

Code F mm d mm
006 007 008 5 009

Kinked leads, bulk pcs.

PAPR

Cut Crimped J leads, Bent 90° leads, leads, blister leads,
bulk blister
blister
pcs. pcs.
pcs. pcs.
1000
1000
200 120
200 120
250 344
344 120
002 003
004 012
1 Available upon request

Please read Cautions and warnings and Important notes at the end of this document.

Page 18 of 25

B41889 Very low impedance 105 °C

Overview of packing units and code numbers for case sizes 18 x 20 25 x 40

Case size dxl
mm 18 x 20 18 x 25 18 x 18 x 35 18 x 40 20 x 20 x 25 20 x 30 20 x 35 20 x 40 22 x 30 22 x 35 22 x 40 25 x 40 The last three digits of the complete ordering code state the lead configuration

Standard, bulk pcs. 175 150 100 125 100 80 40 000

Taped,

Kinked

Ammo pack
leads, bulk
pcs.
pcs.

Code F mm d mm 001
007 008 5 009

PAPR

Cut Crimped J leads, Bent 90°
leads, leads, blister leads,
bulk blister
blister
pcs. pcs.
pcs. pcs.
175 200
200 120
150 200
200 120
100 150
150 120
100 150
100 120
125 200
125 200
100 120
100 120
100 120
002 003
004 012

Please read Cautions and warnings and Important notes at the end of this document.

Page 19 of 25

B41889 Very low impedance 105 °C

Cautions and warnings

Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide DMF or dimethyl acetamide DMAC .

Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited.

As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling Al electrolytic capacitors:

Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water.

Please read Cautions and warnings and Important notes at the end of this document.

More datasheets: B41889A2827M | B41889A4687M8 | B41889A4108M8 | B41889A2108M8 | B41889A3108M8 | B41889A2228M8 | B41889A2228M | B41889A4158M8 | B41889A4687M | B41889A3687M8

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B41889A4108M Datasheet file may be downloaded here without warranties.

Datasheet ID: B41889A4108M 511432